Introdución
The Chief TS325TU Medium THINSTALL Dual Swing Arm Wall Display Mount is designed to provide a secure and versatile mounting solution for flat panel displays ranging from 30 to 52 inches. This mount offers an ultra-low profile when collapsed and extends up to 25 inches, allowing for optimal viewing angles with its Centris low-profile tilt and Centerless lateral shift capabilities. It features integrated cable management for a clean installation.
Información de seguridade
AVISO: Failure to read, understand, and follow all instructions can result in serious personal injury, property damage, or voiding of product warranty. If you have any questions, contact Chief customer service or a qualified installer.
- Non exceda a capacidade de carga máxima de 75.00 lb (34 kg).
- Asegúrate de que a superficie de montaxe poida soportar con seguridade o peso combinado do soporte e da pantalla.
- Always mount to structural studs or appropriate wall anchors. Note that this mount is designed for studs approximately 16 inches apart.
- Use appropriate tools and follow all local building codes.
- Manteña os nenos e as mascotas afastados durante a instalación.
Contido do paquete
Comprobe que todos os compoñentes estean presentes antes de comezar a instalación:
- 1 x Conxunto principal
- 1 x Wall Rail
- 1 x Right Upright
- 1 x Left Upright
- 1 x Top Interface Support
- 1 x Bottom Interface Support
- 2 x Wall Rail Cover
- 1 x Lag Screw Cover
- 1 x Bumper
- 1 x Latch Spacer
- 2 x Long Adhesive
- 4 x Short Adhesive
- Mounting Hardware (various screws, washers, spacers)
Configuración e instalación
Proper installation is critical for the safety and performance of your display mount. It is recommended to have at least two people for installation due to the weight and size of the mount.
Ferramentas necesarias (non incluídas):
- Buscador de pernos
- Perforar coas brocas adecuadas
- Nivel
- Cinta métrica
- Socket Wrench / Ratchet
- Destornillador Phillips
- Lapis
Instalación paso a paso:
- Prepara o muro:
Locate and mark the center of two adjacent wall studs. This mount is designed for standard 16-inch stud spacing. Ensure there are no electrical wires or plumbing in the drilling path. It is highly recommended to plan your entire layout, including TV, speakers, and wiring, before drilling.
- Attach Wall Rail:
Position the Wall Rail on the marked studs, ensuring it is level. Mark the pilot hole locations. Drill pilot holes into the studs. Secure the Wall Rail to the wall using the provided lag screws. Ensure the screws are tightened securely but do not overtighten to avoid stripping.
Image: Main assembly of the Chief TS325TU mount, showing the wall plate, articulating arms, and display interface.
- Assemble Display Interface:
Attach the Right and Left Uprights to the back of your display using the appropriate screws, washers, and spacers from the mounting hardware kit. Ensure the uprights are centered and level on the display. Then, attach the Top and Bottom Interface Supports to the uprights.
- Mount Display to Wall Rail:
Carefully lift the display with the attached interface and hook it onto the Wall Rail. The design allows for post-installation lateral shift of up to 16 inches (406 mm) for limitless centering capability. Secure the display to the mount according to the specific instructions in the detailed manual (refer to manufacturer's full manual for precise steps).
Imaxe: Lateral view of the Chief TS325TU mount, illustrating its compact profile when retracted and the extension capability.
- Xestión de cables
Utilize the enclosed, tool-free cable covers and the wide open wall plate to route power and signal cables. This helps maintain a clean and organized appearance.
Funcionamento da montura
The Chief TS325TU mount offers flexible positioning for your display:
- Extensión: The mount extends up to 25 inches (635 mm) from the wall, maximizing viewing potential from various positions in the room.
- Inclinación: The Centris low-profile tilt mechanism allows for up to 15 degrees of effortless fingertip tilt. This enables you to achieve optimal viewángulos de inflexión e reducir o brillo.
- Swivel/Pan: The dual swing arms allow for significant swivel capabilities, enabling you to turn the display left or right to suit your viewnecesidades de ing.
- Desprazamento lateral: After installation, the display can be shifted laterally along the wall plate by up to 16 inches (406 mm) to fine-tune its horizontal position without re-drilling.
Imaxe: En ángulo view of the Chief TS325TU mount, highlighting its robust construction and articulating design.
Mantemento
Regular maintenance ensures the longevity and safe operation of your mount:
- Limpeza: Limpar o soporte regularmente cun pano suave e seco. Para marcas difíciles, usar un pano lixeiramente seco.amp cloth with mild soap, then wipe dry. Avoid abrasive cleaners or solvents.
- Comproba as conexións: Comprobe periodicamente todos os parafusos e bulóns para asegurarse de que permanecen axustados. Non os aperte demasiado.
- Verificación do movemento: Occasionally extend, retract, tilt, and swivel the mount to ensure smooth operation. If movement becomes stiff, consult the troubleshooting section or contact support.
Resolución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| A montura parece inestable ou tambaleante. | Loose wall mounting bolts or display attachment screws. | Carefully re-tighten all wall and display attachment screws. Do not overtighten. If the issue persists, consult a professional installer. |
| Difficulty extending or retracting the arm. | Friction in the arm joints. | Ensure the mount is not overloaded. Check for any obstructions. The mount is designed for smooth movement; excessive force should not be required. |
| Display does not tilt smoothly. | Tilt mechanism tension. | The Centris tilt mechanism is designed for fingertip adjustment. Refer to the full manufacturer's manual for specific tilt tension adjustment procedures if needed. |
| Cables are not neatly managed. | Improper routing through cable covers. | Re-route cables through the integrated cable covers on the arms and wall plate for a cleaner look. |
For complex issues or if you are unsure about any step, please contact Chief customer support or a certified installer.
Especificacións
| Característica | Detalle |
|---|---|
| Modelo de produto | TS325TU |
| Marca | Xefe |
| Tipo de montaxe | Soporte de parede |
| Tipo de movemento | Tilt, Articulating |
| Capacidade de carga máxima | 75.00 lb (34 kg) |
| Minimum Compatible Display Size | 30 polgadas |
| Maximum Compatible Display Size | 52 polgadas |
| Extensión máxima | 25 polgadas (635 mm) |
| Ángulo de inclinación máximo | 15 graos |
| Lateral Shift Adjustment | Up to 16 Inches (406 mm) |
| Dimensións do produto (contraídas) | 1.3 x 29.5 x 17.2 polgadas (33 x 749 x 437 mm) |
| Peso do elemento | 1 libras (0.45 kg) Note: This weight seems unusually low for a mount of this type and capacity. Please refer to official manufacturer documentation for precise weight. |
| Material | Metal |
| Cor | Negro |
Garantía e Soporte
For detailed warranty information, please refer to the official Chief Manufacturing website or the documentation included with your product. Chief provides support for their products to ensure customer satisfaction.
If you require technical assistance, have questions about installation, or need to report a missing part, please visit the official Chief Manufacturing support page or contact their customer service directly. Contact information can typically be found on their websitio:
