Produto rematadoview
The Xerox 7800/DX Phase Color Laser Printer is designed for professional environments requiring high-quality color printing and robust performance. This printer offers advanced capabilities for graphic-intensive tasks, including industry-leading media flexibility and professional color management technologies.

Figura 1: Fronte view of the Xerox 7800/DX Phase Color Laser Printer, showcasing its multi-tray design and control panel.
Instrucións de configuración
1. Desembalaxe e colocación
- Carefully remove the printer from its packaging. Due to its weight (approximately 256 pounds), it is recommended to use appropriate lifting equipment or assistance.
- Place the printer on a stable, level surface capable of supporting its weight and dimensions (27.52 x 25.24 x 37.52 inches). Ensure adequate ventilation around the unit.
2. Conexión de alimentación
- Conecte o cable de alimentación á impresora e despois a unha toma de corrente con conexión a terra.
- Prema o botón de acendido para acender a impresora.
3. Instalación do cartucho de tóner
The Xerox 7800/DX uses separate toner cartridges for Black, Cyan, Magenta, and Yellow. Refer to the printer's internal diagrams for specific slot locations.
- Abra o panel de acceso frontal da impresora.
- Unpack each toner cartridge (compatible cartridges include 05R02801, 05R02802, 05R02803, 05R02804, 05R02805, 05R02806).
- Gently shake the cartridge to distribute the toner evenly.
- Insert each cartridge into its corresponding color-coded slot until it clicks into place.
- Peche o panel de acceso frontal.

Figura 2: Example of an internal printer view, indicating where toner cartridges are typically installed.
4. Cargando papel
The printer features multiple paper trays with a maximum input sheet capacity of 3140 sheets.
- Pull out the desired paper tray. The printer has 2 trays as standard.
- Adjust the paper guides to fit the paper size. The printer supports various sizes, including 8.5 x 11 inch and up to 11 inches in width.
- Load the paper (plain paper is supported) into the tray, ensuring it is flat and below the maximum fill line.
- Empurre con coidado a bandexa de volta na impresora.
- Confirme o tipo e o tamaño do papel no panel de control se se lle solicita.
5. Instalación de software e controladores
To enable printing from your computer, install the necessary drivers.
- The Xerox 7800/DX is compatible with PC, Mac, and Unix operating systems.
- Visit the official Xerox support websitio para descargar os controladores máis recentes para o teu sistema operativo.
- Siga as instrucións en pantalla para completar a instalación.
- Connect the printer to your computer via USB or Ethernet cable.
Instrucións de funcionamento
1. Panel de control rematadoview
The printer features a touchscreen control panel for easy navigation and settings adjustment. Use the touch interface to access menus, check printer status, and configure print jobs.

Figura 3: detallada view of the printer's touchscreen control panel, showing various menu options.
2. Impresión básica
- Abre o documento que queres imprimir no teu ordenador.
- Seleccione "Imprimir" no menú da aplicación.
- Choose the Xerox 7800/DX printer from the list of available printers.
- Adjust print settings as needed, such as:
- Color/Monochrome: The printer supports full color output with a maximum resolution of 1200 x 2400 dpi.
- Impresión dúplex: Automatic dual-sided printing is supported.
- Orixe do papel: Select the desired paper tray.
- Copias: Up to 312 copies per run.
- Click "Print." The printer has a maximum print speed of 45 pages per minute (ppm) for both color and monochrome. Initial page print time is 1-2 seconds.
3. Conectividade
- Ethernet: Connect the printer to your network using an Ethernet cable for shared access.
- USB: A single USB 2.0 port is available for direct connection to a computer.
Mantemento
1. Substitución do tóner
When a toner cartridge is low or empty, the printer's control panel will display a notification. Replace cartridges as follows:
- Abra o panel de acceso frontal.
- Carefully remove the empty toner cartridge by pulling it straight out.
- Unpack a new, genuine Xerox toner cartridge of the correct color.
- Shake the new cartridge gently.
- Insert the new cartridge into the corresponding slot until it locks into place.
- Peche o panel de acceso frontal.
2. Limpeza
- Exterior: Limpe as superficies exteriores cun suave, damp, pano que non solte fiapos. Evite produtos de limpeza abrasivos.
- Interior: Periodically clean the interior of the printer, especially around the paper path and toner area, using a dry, lint-free cloth or a specialized printer vacuum. Refer to the printer's on-screen instructions for specific cleaning procedures.
Resolución de problemas
This section addresses common issues you might encounter. For more detailed troubleshooting, consult the full service manual or contact Xerox support.
Problemas comúns e solucións:
- A impresora non responde:
- Comprobe as conexións de alimentación e asegúrese de que a impresora estea acendida.
- Verifica as conexións de rede ou do cable USB.
- Reinicie tanto a impresora como o ordenador.
- Asegúrate de que estea instalado e seleccionado o controlador de impresora correcto.
- Mala calidade de impresión:
- Comprobe os niveis de tóner e substitúa os cartuchos con pouco nivel.
- Perform a print head cleaning or calibration from the control panel.
- Asegúrate de usar o papel axeitado para a túa configuración de impresión.
- Atascos de papel:
- Follow the on-screen instructions on the control panel to locate and clear the jam.
- Asegúrate de que o papel estea cargado correctamente e que as bandexas non estean demasiado cheas.
- Remove any foreign objects from the paper path.
Especificacións técnicas
| Característica | Especificación |
|---|---|
| Nome do modelo | Xerox 7800/DX |
| Tecnoloxía de impresión | Láser |
| Saída da impresora | Cor |
| Velocidade máxima de impresión (cor/monocromo) | 45 ppm |
| Resolución máxima de impresión (cor/monocromo) | 1200 x 2400 ppp |
| Impresión dúplex | Automático |
| Capacidade máxima da folla de entrada | 3140 follas |
| Número de bandexas | 2 |
| Tamaño máximo do soporte | 8.5 x 11 inch (up to 11 inches width) |
| Dispositivos compatibles | PC, Mac, Unix |
| Tecnoloxía de conectividade | Ethernet, USB |
| Interface de hardware | USB |
| Método de control | Pantalla táctil |
| Capacidade de almacenamento da memoria | 2048 MB |
| Dimensións do produto (L x W x H) | 27.52 x 25.24 x 37.52 polgadas |
| Peso do elemento | 256 libras |
| Compoñentes incluídos | Impresora láser |
| Compatible Cartridge Numbers | 05R02801, 05R02802, 05R02803, 05R02804, 05R02805, 05R02806 |
Información da garantía
The Xerox 7800/DX Phase Color Laser Printer comes with a full manufacturer's warranty. For specific terms and conditions, please refer to the documentation included with your product or visit the official Xerox websitio.
Nota importante: All returns must be authorized by Xerox Corp. No exceptions.
Atención ao cliente
For further assistance, technical support, or to access additional resources, please contact Xerox Customer Support or visit their official websitio.
Podes atopar máis información e recursos de apoio en Xerox Store on Amazon or the main Xerox corporate websitio.