EnGenius EAP350 N300 High-Power Wireless Gigabit Indoor Access Point User Manual

Introdución

This manual provides detailed instructions for the installation, configuration, and operation of the EnGenius EAP350 N300 High-Power Wireless Gigabit Indoor Access Point. Please read this manual thoroughly before using the device to ensure proper setup and optimal performance.

1. Produto rematadoview

The EnGenius EAP350 is a high-power wireless N access point designed for robust indoor wireless connectivity. It supports multiple operating modes including Access Point, WDS, and Repeater, offering flexibility for various network deployments. With its Gigabit Ethernet port and 802.11n standard, it delivers high-speed wireless performance.

Características principais:

• High-power, Long-range Wi-Fi for extended coverage.
• Up to 29dBm RF Tx power for enhanced signal strength.
• Wireless N (802.11n) standard delivers up to 300Mbps throughput.
• Gigabit Ethernet LAN interface for fast wired data transfer.
• Supports 802.1q mapping of SSIDs and up to four VLANs.
• Power-over-Ethernet (IEEE 802.3af) support for flexible deployment.
• Internal 5dBi antenna with optimized configuration.

Aspecto físico:

Figure 1: EnGenius EAP350 N300 Access Point. This image displays the top-down view of the white, circular access point with the EnGenius logo and model number EAP350 visible. LED indicators for wireless, LAN, and power are also present.

2. Contido do paquete

Verifique que o seu paquete conteña os seguintes elementos:

• EnGenius EAP350 High-power Wireless N Access Point
• Adaptador de corrente (se non usa PoE)
• Cable Ethernet
• Kit de montaxe (parafusos, ancoraxes)
• Guía de instalación rápida

3. Configuración e instalación

3.1 Montaxe do dispositivo

The EAP350 can be mounted on a ceiling or wall. Choose a central location for optimal wireless coverage. Use the provided mounting kit to secure the device.

1. Seleccione un lugar de montaxe axeitado.
2. Use o soporte de montaxe como modelo para marcar os orificios de perforación.
3. Fai buratos e coloca ancoraxes de parede se é necesario.
4. Fixe o soporte de montaxe á superficie.
5. Attach the EAP350 to the mounting bracket by twisting it into place.

3.2 Alimentación do dispositivo

The EAP350 supports Power-over-Ethernet (PoE) IEEE 802.3af or can be powered by a standard power adapter.

• Conexión PoE: Connect an Ethernet cable from a PoE-enabled switch or a PoE injector (e.g., EnGenius EPE5818Gaf) to the LAN port of the EAP350.
• Conexión do adaptador de alimentación: If PoE is not available, connect the provided power adapter to the power input port on the EAP350 and plug it into a power outlet.

3.3 Conexión de rede inicial

Connect the EAP350 to your network using an Ethernet cable from its LAN port to your router or switch. Ensure the device powers on and the LED indicators illuminate correctly.

4. Modos de funcionamento

The EAP350 can operate in several modes to suit different network requirements:

• Modo de punto de acceso (AP): The default mode, where the device acts as a central hub for wireless clients to connect to your wired network.
• Modo WDS (Sistema de distribución sen fíos): Allows the EAP350 to wirelessly connect to other access points to extend the network without physical cabling. Can be configured as WDS AP, WDS Bridge, or WDS Station.
• Modo repetidor: Extends the range of an existing wireless network by re-transmitting the signal from another access point.

5. Configuración

5.1 Acceso ao Web Interface

To configure the EAP350, access its webInterface de xestión baseada en:

1. Ensure your computer is connected to the same network as the EAP350.
2. Abrir a web browser and enter the default IP address (refer to the Quick Installation Guide or device label for the default IP, typically 192.168.1.1 or similar).
3. Introduza o nome de usuario e o contrasinal predeterminados (por exemplo, admin/admin).

5.2 Configuración sen fíos básica

Navigate to the Wireless settings section to configure your Wi-Fi network:

• SSID: Set your desired network name.
• Modo de seguridade: Select WPA2-PSK (AES) for optimal security.
• Chave precompartida: Enter a strong password for your wireless network.
• Modo de funcionamento: Select the desired mode (Access Point, WDS, Repeater).

5.3 Configuración avanzada

The EAP350 offers advanced features such as VLAN tagging and Quality of Service (QoS) for network management. Refer to the full user manual for detailed instructions on these configurations.

5.4 Gardar a configuración

After making any changes, ensure you save the configuration to the device's memory. Typically, there is a "Save" or "Apply" button within the web interface. Some devices may require a separate step to save the running configuration to the startup configuration.

6. Mantemento

6.1 Actualizacións de firmware

Revisa o EnGenius regularmente website for firmware updates. Updating the firmware can improve performance, add new features, and address security vulnerabilities. Follow the instructions provided with the firmware update package carefully.

6.2 Restablecemento dos valores predeterminados de fábrica

If you encounter persistent issues or forget your login credentials, you can reset the device to its factory default settings. Locate the reset button (often a small pinhole) on the device. With the device powered on, press and hold the reset button for approximately 10-15 seconds until the LEDs indicate a reset.

6.3 Limpeza

Clean the device periodically with a soft, dry cloth. Do not use liquid cleaners or aerosols, as they may damage the device.

7 Solución de problemas

This section addresses common issues you might encounter with your EAP350.

• Sen enerxía:
  • Ensure the power adapter is securely connected to both the device and a working power outlet, or that the PoE source is active and connected to the LAN port.
  • Check the power LED indicator.
• Non se pode conectar á wifi:
  • Verify the SSID and password are correct.
  • Check if the wireless function is enabled in the web interface.
  • Ensure your client device is within range.
• Velocidade sen fíos lenta:
  • Comprobe se hai interferencias doutros dispositivos ou redes sen fíos.
  • Ensure the EAP350 is placed in an optimal location, away from obstructions.
  • Verify the wired connection speed to your router/switch.
  • Actualiza o firmware á última versión.
• Non se pode acceder Web Interface:
  • Ensure your computer's IP address is in the same subnet as the EAP350.
  • Tenta limpar a caché do teu navegador ou usar un navegador diferente.
  • If the IP address has been changed and forgotten, a factory reset may be necessary.

8. Especificacións

9. Información da garantía

EnGenius products are covered by a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official EnGenius websitio. Garda o comprobante de compra para reclamacións de garantía.

10. Soporte técnico

If you require further assistance or encounter issues not covered in this manual, please contact EnGenius Technical Support. You can find contact information and additional resources, including FAQs and driver downloads, on the official EnGenius websitio:

Websitio: www.engeniustech.com/asistencia

Please have your product model number (EAP350) and serial number ready when contacting support.