1. Introdución
The Claber Programmable Solenoid Valve with Programmer is an advanced device designed to automate irrigation systems. It can be installed directly on a water outlet or tap, and its robust, leak-proof design (IP68 rated) allows it to function even when fully immersed. The integrated programmer offers flexible scheduling with up to 6 daily programs, controlled via a user-friendly three-button interface and a large display.
This manual provides detailed instructions for the proper installation, operation, and maintenance of your Claber Solenoid Valve to ensure optimal performance and longevity.
Figure 1: Claber Programmable Solenoid Valve with Programmer. This image shows the main unit of the solenoid valve, featuring the integrated digital programmer on top and the water inlet/outlet connections at the bottom.
2. Información de seguridade
Please read all safety instructions carefully before installing and operating the device. Failure to follow these instructions may result in damage to the product or personal injury.
- Non permita que os nenos utilicen este dispositivo. Este produto non é axeitado para o seu uso por nenos.
- Avoid animal interaction. Keep the device away from animals to prevent damage or interference with operation.
- Ensure the operating pressure is within the specified range of 0.5 to 12 bar.
- Use only a 9V alkaline battery as specified.
- Do not attempt to disassemble or repair the unit beyond the instructions provided in this manual.
- When installing underground, ensure proper drainage and protection from physical damage.
3. Compoñentes do produto
The Claber Programmable Solenoid Valve consists of the following main components:
- Solenoid Valve Unit: The main body with 1-inch F (26-34 mm) input and outlet threads.
- Integrated Programmer: Digital display and three control buttons for setting irrigation schedules.
- Compartimento de batería: Located beneath the programmer, designed for a 9V alkaline battery (not included).
- Leak-proof Lid (IP68): Protects the electronic components from water ingress.
4. Configuración e instalación
4.1. Instalación da batería
The programmer requires one 9V alkaline battery (not included) for operation. A fresh battery is typically sufficient for an entire season.
- Gently unscrew and remove the top programmer unit from the valve body by turning it counter-clockwise.
- Locate the battery compartment on the underside of the programmer unit.
- Introduza unha nova pila alcalina de 9 V, asegurándose de manter a polaridade correcta.
- Carefully reattach the programmer unit to the valve body, aligning the threads and turning clockwise until secure. Ensure the seal is properly seated to maintain IP68 rating.
Figure 2: Battery Installation. This diagram illustrates the steps for removing the programmer unit, inserting the 9V battery into its compartment, and reattaching the unit to the valve body.
4.2. Instalación física
The solenoid valve can be installed directly onto a tap or a water outlet. It can be mounted vertically or horizontally. Ensure the flow direction indicated on the valve body (marked 'FLOW') matches the water flow.
- Above Ground Installation: Connect the 1-inch F (26-34 mm) input thread to your water source and the output thread to your irrigation line. Hand-tighten or use a wrench gently to ensure a leak-free connection.
- Instalación subterránea: The valve is IP68 rated and can be installed in a cockpit or valve box for protection. Ensure the valve is placed on a bed of gravel for drainage and that the valve box allows for easy access for maintenance.
Figura 3: Example of Underground Installation. This image depicts the Claber solenoid valve installed underground within a valve box, connected to an irrigation line, demonstrating a typical setup for a hidden system.
Figure 4: Connection Diagram. This image shows a schematic of the solenoid valve connected in an irrigation system, illustrating the input and output connections and the direction of water flow.
5. Instrucións de funcionamento
The Claber programmer is designed for easy operation with three control buttons and a clear display.
5.1. Programación básica
The programmer allows for setting watering times from 1 minute up to 23 hours and 59 minutes, with the possibility of up to 6 watering cycles per day. It supports both manual and weekly programming, with options to exclude specific days of the week.
- Visualización: The large format display communicates all necessary information using symbols and numbers.
- Botóns: Use the three buttons (typically 'Mode', 'Up', 'Down' or similar) to navigate through menus and adjust settings.
- Configuración da hora e do día: Before programming, ensure the current time and day are correctly set on the programmer.
- Creación de programas: Follow the on-screen prompts to set start times, duration, and frequency for each of the up to 6 daily programs.
- Rego manual: The unit typically includes a manual override function for immediate watering outside of scheduled programs. Consult the on-screen menu for this option.
6. Mantemento
6.1. Substitución da batería
Replace the 9V alkaline battery annually or when the low battery indicator appears on the display. Refer to Section 4.1 for detailed battery installation instructions.
6.2. Invernada e almacenamento
During winter months or periods of freezing temperatures, it is recommended to remove the programmer unit and store it in a sheltered, frost-free location. The electronic components are separable from the plumbing for convenient removal and storage.
- Turn off the main water supply to the valve.
- Drain any remaining water from the valve and irrigation lines.
- Unscrew and remove the programmer unit from the valve body.
- Store the programmer in a dry, protected area where temperatures do not drop below +5 °C.
- If the valve body remains installed, ensure it is completely drained and protected from freezing.
6.3. Limpeza
Periodically clean the exterior of the valve and programmer with a damp cloth. Do not use abrasive cleaners or solvents. Ensure the display and buttons are free from dirt and debris for clear visibility and proper function.
7 Solución de problemas
If you encounter issues with your Claber Programmable Solenoid Valve, refer to the following common problems and solutions:
| Problema | Causa posible | Solución |
|---|---|---|
| Programmer display is blank or dim. | Batería baixa ou esgotada. | Replace the 9V alkaline battery. |
| Valve does not open/close as programmed. | Incorrect programming; Low battery; Water pressure too low/high; Debris in valve. | Verify program settings; Replace battery; Check water pressure (0.5-12 bar); Inspect valve for obstructions. |
| Fugas de auga polas conexións. | Conexións soltas; xuntas tóricas/xuntas danadas. | Tighten connections; Inspect and replace O-rings/seals if damaged. |
| Valve not responding to button presses. | Battery issue; Electronic malfunction. | Substitúa a batería. Se o problema persiste, póñase en contacto co servizo de atención ao cliente. |
If the issue persists after attempting these solutions, please contact Claber customer support for further assistance.
8. Especificacións
| Característica | Especificación |
|---|---|
| Número de modelo | CL0000908260000 |
| Material | PA6 |
| Dimensións (L x W x H) | 7.48 x 4.33 x 7.68 inches (180x105x190 cm) |
| Número de portos | 2 |
| Tipo de válvula | Válvula Solenoide |
| Input/Output Thread | 1 inch F (26-34 mm) |
| Voltage | 9 voltios (DC) |
| Tipo de batería | 9V Alkaline (not included) |
| Presión de operación | 0.5 a 12 bar |
| Caudal | 4.6 to 96 litres/minute |
| Temperatura de funcionamento | +5 °C a +70 °C |
| Clasificación de protección | IP68 (leak-proof, works in total immersion) |
| Ciclos de programación | Up to 6 daily programs |
| Duración do rego | 1 minuto a 23 horas 59 minutos |
9. Garantía e soporte
9.1. Información da garantía
For detailed warranty information regarding your Claber Programmable Solenoid Valve, please refer to the warranty card included with your product or visit the official Claber websitio. Garda o comprobante de compra para reclamacións de garantía.
9.2. Atención ao cliente
If you require further assistance, have questions about installation, programming, or troubleshooting that are not covered in this manual, please contact Claber customer support. Contact details can typically be found on the official Claber websitio web ou na embalaxe do produto.
