BLACK+DECKER Multievo Multi-tool Inflator Attachment MTNF9-XJ User Manual

1. Introdución

Thank you for choosing the BLACK+DECKER Multievo Multi-tool Inflator Attachment MTNF9-XJ. This attachment is designed to provide efficient inflation for various items, including vehicle tires and sports equipment. It is an integral part of the BLACK+DECKER 18V Multievo system, offering versatility and convenience by transforming your Multievo base unit into a powerful inflator.

This manual provides essential information for the safe and effective use of your inflator attachment. Please read it thoroughly before operation and retain it for future reference.

Figure 1: The BLACK+DECKER Multievo Multi-tool Inflator Attachment MTNF9-XJ, shown connected to a compatible Multievo base unit (base unit sold separately).

2. Información de seguridade

Always observe basic safety precautions when using power tools and attachments to reduce the risk of fire, electric shock, and personal injury.

Avisos xerais de seguridade:

• Le todas as instrucións: Familiarize yourself with the operation and limitations of the tool and the specific potential hazards associated with this attachment.
• Manter a zona de traballo limpa e ben iluminada: As zonas desordenadas ou escuras invitan a accidentes.
• Non operar en atmosferas explosivas: Do not use the tool in the presence of flammable liquids, gases, or dust.
• Manteña afastados aos nenos e aos transeúntes: As distraccións poden facer que perdas o control.
• Vístete correctamente: Non leve roupa folgada nin xoias. Manteña o cabelo, a roupa e as luvas lonxe das pezas móbiles.
• Use equipos de seguridade: Always wear eye protection. Use a dust mask, non-skid safety shoes, hard hat, or hearing protection when appropriate.
• Evite o arranque accidental: Ensure the switch is in the off-position before connecting to a power source or picking up the tool.
• Non excedas: Manteña a posición correcta e o equilibrio en todo momento.
• Manter coidadosamente as ferramentas: Keep cutting tools sharp and clean. Follow instructions for lubricating and changing accessories.
• Desconecte a batería: Remove the battery pack from the Multievo base unit before making any adjustments, changing accessories, or storing the tool.
• Comprobar se hai pezas danadas: Antes de usalo máis, débese comprobar coidadosamente un protector ou outra peza danada para determinar que funcionará correctamente e realizará a función para a que está destinada.
• Never direct air stream at people or animals: High-pressure air can cause injury.
• Non inflar demasiado: Always check the recommended pressure for the item being inflated to prevent bursting and potential injury.

3. Contido do paquete

Your BLACK+DECKER Multievo Multi-tool Inflator Attachment MTNF9-XJ package includes the following items:

• 1 x BLACK+DECKER Multievo Multi-tool Inflator Attachment
• 2 x Accessory Adapters (e.g., needle inflator, tapered nozzle)

The Multievo base unit and battery are sold separately.

Figure 2: Included accessory adapters for various inflation needs.

4. Configuración

Before using the inflator attachment, ensure your BLACK+DECKER Multievo base unit is fully charged and ready for use.

Attaching the Inflator Head:

1. Ensure the Multievo base unit is switched OFF and the battery pack is removed.
2. Align the inflator attachment with the front of the Multievo base unit.
3. Push the attachment firmly onto the base unit until it clicks securely into place.
4. Verify that the attachment is securely fastened and does not wobble.
5. Insert the charged battery pack into the Multievo base unit.

Figure 3: The inflator attachment securely connected to the Multievo base unit.

Selecting and Attaching an Adapter:

1. Identify the appropriate accessory adapter for the item you intend to inflate (e.g., Schrader valve for car tires, needle for sports balls, tapered nozzle for inflatables).
2. Screw the chosen adapter onto the threaded end of the inflator hose. Ensure it is tightened securely to prevent air leaks.
3. The inflator attachment features on-board accessory storage to keep the two accessory adapters safe and easily accessible, eliminating the risk of loss.

5. Instrucións de funcionamento

This section details how to use your inflator attachment for various tasks.

Inflado de pneumáticos:

1. Ensure the correct adapter is attached to the inflator hose. For car tires, the standard Schrader valve connector is typically used.
2. Check the recommended tire pressure (PSI or Bar) for your vehicle, usually found on a sticker inside the driver's side door jamb or in the owner's manual.
3. Connect the adapter firmly to the tire valve stem.
4. Press the trigger on the Multievo base unit to begin inflation.
5. Monitor the pressure gauge on the inflator attachment. The gauge displays pressure in both Bar and PSI, allowing you to accurately inflate to the desired level.
6. Release the trigger once the desired pressure is reached.
7. Disconnect the adapter from the tire valve.

Figure 4: Inflating a car tire with the Multievo inflator attachment.

Inflar equipamento deportivo:

1. Select the appropriate adapter (e.g., needle for sports balls, tapered nozzle for inflatable toys).
2. Attach the chosen adapter to the inflator hose.
3. Insert the adapter into the item to be inflated.
4. Press the trigger to begin inflation.
5. Inflate gradually, checking the item's firmness or using the pressure gauge if applicable, to avoid overinflation.
6. Release the trigger when the item is sufficiently inflated.
7. Retire o adaptador.

Figure 5: The Multievo system offers a range of attachments for diverse tasks.

6. Mantemento

Proper maintenance ensures the longevity and optimal performance of your inflator attachment.

Limpeza:

• Always disconnect the inflator attachment from the Multievo base unit and remove the battery before cleaning.
• Wipe the exterior of the attachment with a clean, damp pano. Non use produtos químicos agresivos ou produtos de limpeza abrasivos.
• Ensure no moisture enters the air vents or internal components.

Almacenamento:

• Store the inflator attachment in a dry, cool place, away from direct sunlight and extreme temperatures.
• Keep the accessory adapters stored in their designated on-board storage slots to prevent loss.
• Almacenar fóra do alcance dos nenos.

7 Solución de problemas

If you encounter issues with your inflator attachment, refer to the following common problems and solutions:

Se o problema persiste despois de intentar estas solucións, póñase en contacto co servizo de atención ao cliente de BLACK+DECKER.

8. Especificacións

The following are the technical specifications for the BLACK+DECKER Multievo Multi-tool Inflator Attachment MTNF9-XJ:

• Marca: BLACK+DECKER
• Número de modelo: MTNF9-XJ
• Fonte de enerxía: Battery Powered (via Multievo 18V base unit)
• Voltage: 18 Volts (when connected to Multievo base unit)
• Peso do artigo: 500 gramos
• Tipo de material: Plástico
• Compoñentes incluídos: 1 x Inflator Attachment, 2 x Accessory Adapters
• Características adicionais: Pressure gauge (Bar/PSI), On-board accessory storage

9. Garantía e soporte

BLACK+DECKER products are manufactured to high-quality standards and are guaranteed against manufacturing defects. For detailed warranty information, including terms, conditions, and duration, please refer to the warranty card included with your original Multievo base unit or visit the official BLACK+DECKER websitio.

For technical assistance, spare parts, or to locate an authorized service center, please contact BLACK+DECKER customer support:

• Websitio: www.blackanddecker.com
• Atención ao cliente: Refer to your region-specific BLACK+DECKER websitio web para obter números de contacto e horarios de atención.

When contacting support, please have your product model number (MTNF9-XJ) and purchase information readily available.