1. Introdución
This manual provides essential information for the installation, maintenance, and troubleshooting of the Indesit 1920H8 dryer belt. This product is a replacement part designed to restore the functionality of compatible clothes dryers. Please read this manual thoroughly before attempting any installation or repair.
2. Información de seguridade
Always prioritize safety when working with electrical appliances. Failure to follow these safety guidelines may result in injury or damage to the appliance.
- Desconectar a enerxía: Before beginning any repair or installation, ensure the dryer is completely unplugged from the electrical outlet.
- Instalación profesional recomendada: If you are not experienced with appliance repair, it is highly recommended to seek assistance from a qualified technician.
- Usar equipo de protección: Usar equipos de protección individual axeitados, como luvas, para evitar lesións.
- Inspeccionar por danos: Before installation, carefully inspect the new belt for any signs of damage. Do not install a damaged belt.
- Mantén os nenos lonxe: Ensure children and pets are kept away from the work area during installation.
3. Produto rematadoview
The Indesit 1920H8 dryer belt is a flat drive belt essential for the operation of your dryer's drum. It transmits power from the motor to the drum, allowing it to rotate and tumble clothes.
Figure 1: Indesit 1920H8 Dryer Belt. A coiled black flat dryer belt, model 1920H8, designed for appliance repair.
4. Compatibilidade
This 1920H8 dryer belt is compatible with various dryer models from the following brands:
- INDESIT
- ARISTON
- ARISTON HOTPOINT
- MEA
- CURLING
- LADYWIND
- RECTILIGNE
- DOMEOS
To ensure compatibility, always verify your appliance's specific model number against the product description or consult with a qualified technician.
5. Instalación
The following steps provide a general guide for replacing a dryer belt. Specific procedures may vary depending on your dryer model. Refer to your dryer's service manual for detailed instructions.
- Desconectar a enerxía: Desconecte a secadora da toma de corrente.
- Acceder ao tambor: Depending on your dryer model, you may need to remove the top panel, front panel, or rear panel to access the dryer drum and motor assembly.
- Retirar o cinto vello: Carefully remove the old, broken, or worn-out belt from around the drum and motor pulley. Note its routing for reference.
- Instalar correa nova: Route the new 1920H8 belt around the dryer drum and then around the motor pulley and idler pulley (if present). Ensure the ribbed side of the belt makes proper contact with the motor pulley.
- Comprobación da tensión: Verify that the belt has appropriate tension. It should be snug but not overly tight.
- Volver montar a secadora: Reattach all panels and secure them properly.
- Proba de funcionamento: Plug the dryer back in and run a short cycle to ensure the drum rotates smoothly and quietly.
Note: If you encounter any difficulties or are unsure about any step, consult a professional appliance repair technician.
6. Mantemento
Proper maintenance can extend the life of your dryer belt and ensure efficient dryer operation.
- Inspección periódica: Periodically inspect the belt for signs of wear, fraying, cracks, or stretching. Replace the belt if any damage is observed.
- Evitar a sobrecarga: Overloading the dryer can put excessive strain on the belt, leading to premature wear.
- Limpar o filtro de pelusa: A clogged lint filter can restrict airflow, causing the dryer to overheat and potentially damage the belt. Clean the lint filter after every load.
7 Solución de problemas
If your dryer is experiencing issues related to the belt, consider the following common problems and solutions:
| Problema | Causa posible | Solución |
|---|---|---|
| Dryer drum does not spin | Broken or dislodged drive belt | Inspect and replace the belt if broken. Re-route if dislodged. |
| Squealing or grinding noise | Worn or stretched belt, worn idler pulley | Inspect the belt for wear; replace if necessary. Check idler pulley for smooth operation. |
| A secadora para a metade do ciclo | Belt slipping due to wear or overload | Reduce load size. Inspect and replace belt if worn. |
Se os pasos de resolución de problemas non resolven o problema, póñase en contacto cun técnico de reparación de electrodomésticos cualificado.
8. Especificacións
- Modelo: 1920H8
- Referencia do fabricante: 481281718177
- Marca: Indesit
- Estilo de cinto: Cinto plano
- Electrodomésticos compatibles: Secador
- Marcas compatibles: Indesit, Ariston, Ariston Hotpoint, MEA, Curling, Ladywind, Rectiligne, Domeos
9. Garantía e soporte
For information regarding the warranty of this product, please refer to the purchase documentation or contact the seller directly. For technical support or further assistance, it is recommended to consult a professional appliance repair service.
Este produto é subministrado por un vendedor francés especializado en pezas de recambio para electrodomésticos desde 1984.