Serta Comfort Ergo Executive Office Chair Instruction Manual

Introdución

Thank you for choosing the Serta Comfort Ergo Executive Office Chair. This manual provides essential information for the safe assembly, operation, and maintenance of your new chair. Please read these instructions carefully before assembly and retain them for future reference.

Información de seguridade

• Monte sempre a cadeira segundo as instrucións proporcionadas.
• Non exceda o límite de peso máximo de 275 libras.
• Be cautious while moving the chair to prevent tipping or instability.
• Asegúrate de que todos os parafusos e tornillos estean ben apertados antes do uso. Comprobeos periodicamente e volva apertalos segundo sexa necesario.
• Evita estar de pé na cadeira ou usala como escano.

Contido do paquete

Before beginning assembly, ensure all components are present and undamaged. If any parts are missing or damaged, please contact customer support.

• Respaldo da cadeira
• Asento da cadeira
• Reposabrazos (2)
• Base de estrelas
• Rodízios (5)
• Cilindro de elevación de gas
• Placa de mecanismo
• Paquete de ferramentas (parafusos, arandelas, chave Allen)

Instrucións de montaxe

Follow these step-by-step instructions for proper assembly. It is recommended to assemble the chair on a soft, non-abrasive surface to prevent damage.

Paso 1: Fixar as rodas á base

Insira as cinco rodas nos buratos do extremo de cada pata da base en forma de estrela. Empurre firmemente ata que encaixen no seu lugar.

Image: The five-star base with casters inserted into each leg, ready for the gas lift.

Step 2: Insert Gas Lift Cylinder

Place the gas lift cylinder into the center hole of the assembled star base. No tools are required for this step; it will rest in place.

Paso 3: Fixar a placa do mecanismo ao asento

Align the mechanism plate with the pre-drilled holes on the underside of the seat cushion. Ensure the front of the mechanism faces the front of the seat. Secure with screws provided in the hardware pack, tightening with the Allen wrench.

Paso 4: Fixar os repousabrazos ao asento e ao respaldo

Attach the armrests to the sides of the seat using the provided screws. Then, attach the backrest to the armrests and seat, aligning all holes and securing with screws. Do not fully tighten all screws until all components are loosely attached to allow for adjustment.

Paso 5: Conectar o conxunto do asento ao elevador de gas

Carefully place the assembled seat and backrest onto the gas lift cylinder, ensuring the center hole of the mechanism plate aligns with the top of the gas lift. Apply gentle downward pressure to secure.

Características do produto

The Serta Comfort Ergo Executive Office Chair is designed with several features to enhance your comfort and productivity:

• Ergonomic Mid-Back Design: Features subtle contours and lumbar support to promote proper posture.
• Semi-Plush Comfort: Double-layer seat cushion and padded armrests are generously filled with high-density foam.
• Tapizado duradeiro: Covered in soft velvet fabric for a luxurious feel.
• Altura axustable: Easily adjust the seat height to your preferred position.
• Mecanismo de bloqueo de inclinación: Lock the chair in an upright position or allow for rocking motion.
• Xiratorio 360°: Allows for easy rotation and movement around your workspace.
• Smooth-Rolling Casters: Dual casters designed for easy mobility on various surfaces.

Image: A visual representation of the chair highlighting its key features, including the cushioned headrest, curved back support, padded armrests, foam-filled seat cushion, adjustable comfort, and 360-degree motion.

Imaxe: Primeiro plano view of the chair's headrest, emphasizing the specialized curved cushions for lasting comfort throughout the day.

Imaxe: Unha detallada view of the chair's foam-filled seat cushion, illustrating its high-quality foam for comfort and support.

Instrucións de funcionamento

Axuste de altura

To adjust the seat height, lift the lever located on the right side of the chair (when seated) upwards. While holding the lever, either stand up to raise the seat or remain seated to lower it. Release the lever to lock the height in place.

Image: A diagram illustrating the height adjustment mechanism. Lift the lever on the side of the chair to raise or lower the seat.

Axuste de inclinación

To unlock the recline mechanism, pull the same lever (on the right side) outwards. The chair back will now allow for a rocking motion. To lock the chair in an upright position, push the lever inwards. To adjust the tension of the recline, twist the round knob located underneath the seat at the front of the mechanism. Turn clockwise to increase tension (stiffer recline) and counter-clockwise to decrease tension (looser recline).

Image: A diagram showing the recline adjustment lever and the tension adjustment knob located beneath the seat. Pull the lever to unlock recline and twist the knob to adjust tension.

Movemento da cadeira

The chair is equipped with 360° motion casters, allowing for easy movement and rotation around your workspace. Ensure the floor surface is clear of obstructions for smooth gliding.

Imaxe: Primeiro plano view of the chair's dual-wheel casters, illustrating their 360-degree motion capability for easy movement.

Mantemento e coidados

To maintain the appearance and longevity of your Serta Comfort Ergo Executive Office Chair, follow these care instructions:

• Limpeza: Limpar cun suave, damp cloth. Avoid harsh chemicals or abrasive cleaners, as they may damage the velvet fabric.
• Comprobacións periódicas: Inspeccione periodicamente todos os parafusos e tornillos para asegurarse de que estean ben axustados. Aperte de novo se é necesario para manter a estabilidade e a seguridade.
• Evite a luz solar directa: A exposición prolongada á luz solar directa pode provocar que o tecido se esvaeza.
• Límite de peso: Adhere to the maximum weight recommendation of 275 lbs to prevent structural damage.

Resolución de problemas

If you encounter any issues with your chair, consider the following:

• A cadeira parece tremer: Comprobe todos os parafusos e bulóns de montaxe. Asegúrese de que estean completamente apertados.
• Gas lift not adjusting: Ensure the height adjustment lever is fully engaged or disengaged as required. If the issue persists, the gas lift may need replacement.
• As rodas non xiran con suavidade: Check for debris (hair, lint) caught in the caster wheels. Clean as necessary.
• Recline not working: Ensure the recline lock lever is disengaged. Adjust the tension knob if the recline feels too stiff or too loose.

For further assistance, please contact Serta Customer Support.

Especificacións

Image: A detailed diagram illustrating the product dimensions, including width, depth, back height, inner seat width, chair height, and seat height, along with the 275 lb weight capacity.

Garantía e Soporte

Serta chairs are designed for quality and durability. For specific warranty information, please refer to the documentation included with your purchase or contact Serta customer support.

Atención ao cliente

Our dedicated U.S. based team is ready to assist you with your Serta chair and any help needed with its assembly or operation.

Image: Serta Customer Service contact information, including a phone number (800) 379 - 9773 and operating hours (6am - 5pm PST).

Teléfono: (800) 379 - 9773
Horario: 6am - 5pm PST

Produto rematadoview Vídeo

Mira este vídeo para unha visión xeralview of Serta chairs and their design philosophy.