Aldes EHL 6-45L 39dB Acoustic Hygro-Adjustable Air Inlet Kit Manual

1. Introdución

This manual provides comprehensive instructions for the Aldes EHL 6-45L 39dB Acoustic Hygro-Adjustable Air Inlet Kit, model 11014085. This kit is designed to regulate airflow and reduce noise, ensuring optimal indoor air quality. Please read this manual thoroughly before installation and operation to ensure proper use and longevity of the product.

Aldes EHL 6-45L 39dB Acoustic Hygro-Adjustable Air Inlet Kit, white

Figure 1: Aldes EHL 6-45L 39dB Acoustic Hygro-Adjustable Air Inlet Kit. This image shows the compact, rectangular design of the white air inlet unit.

2. Instrucións de seguridade

Siga sempre as precaucións de seguridade básicas ao instalar ou manter este produto para reducir o risco de lesións ou danos.

Instalación profesional recomendada: Installation should ideally be performed by a qualified professional to ensure compliance with local building codes and proper functionality.
Ler as instrucións: Lea atentamente todas as instrucións antes de comezar a instalación.
Usar equipo de protección: Use appropriate personal protective equipment (PPE) such as gloves and eye protection during installation.
Inspeccionar por danos: Before installation, inspect the product for any signs of damage. Do not install damaged components.
Ventilación adecuada: Ensure adequate ventilation during and after installation.
Manter fóra do alcance dos nenos: Este produto non é un xoguete. Mantéñase fóra do alcance dos nenos.
Eliminación: Dispose of packaging materials responsibly and according to local regulations.

3. Contido do paquete

Verifique que todos os compoñentes estean presentes e sen danos antes de continuar coa instalación.

1 x Aldes EHL 6-45L 39dB Acoustic Hygro-Adjustable Air Inlet Unit
Installation accessories (e.g., mounting screws, seals - may vary by kit version)
Manual de usuario (este documento)

4. Configuración e instalación

This section outlines the general steps for installing the Aldes EHL air inlet. Specific installation details may vary based on the type of wall or window and local building codes. Consult a professional if unsure.

Escolla localización: Select an appropriate location for the air inlet, typically on an exterior wall or window frame, ensuring it is not obstructed.
Preparar a apertura: Create an opening in the wall or window frame according to the dimensions specified in the product's technical data sheet (not provided in this manual, refer to manufacturer's websitio).
Install Outer Grille (if applicable): Secure the exterior grille to the outside of the opening.
Insert Air Inlet Unit: Carefully insert the Aldes EHL air inlet unit into the prepared opening from the interior side.
Unidade segura: Use the provided mounting screws to firmly secure the air inlet unit to the wall or window frame. Ensure it is level and sealed properly to prevent air leaks.
Aplicar selos: Apply any necessary seals or gaskets to ensure airtightness and acoustic performance.
Funcionalidade de proba: After installation, verify that the air inlet's hygro-adjustable mechanism moves freely and that airflow is established.

Note: For detailed diagrams and specific mounting instructions, please refer to the technical documentation provided by ALDES or consult their official websitio.

5. Instrucións de funcionamento

The Aldes EHL air inlet is a hygro-adjustable device, meaning its airflow capacity automatically adapts based on the humidity level in the room. This ensures optimal ventilation without manual intervention.

Axuste automático: The internal sensor detects changes in ambient humidity. As humidity increases (e.g., during showering or cooking), the air inlet opens further to allow more fresh air in. As humidity decreases, it reduces the airflow.
Rendemento acústico: The "39dB" rating indicates its acoustic attenuation capabilities, designed to reduce external noise transmission while maintaining ventilation.
Sen controis de usuario: This unit operates automatically and does not typically feature manual controls for airflow adjustment. Its design is intended for passive, demand-controlled ventilation.

6. Mantemento

Regular maintenance ensures the efficient and long-lasting operation of your Aldes EHL air inlet.

Frecuencia de limpeza: It is recommended to clean the air inlet at least once a year, or more frequently in dusty environments.
Procedemento de limpeza:
1. Gently remove the front cover of the air inlet.
2. Use a soft brush or a vacuum cleaner with a brush attachment to remove dust and debris from the grille and internal components.
3. Limpe as superficies exteriores con adamp pano. Non use produtos de limpeza ou disolventes abrasivos.
4. Ensure the humidity sensor (if visible) is free from dust and obstructions.
5. Vuelva a colocar a tapa frontal de forma segura.
Do Not Obstruct: Ensure that the air inlet is never blocked by furniture, curtains, or other objects, as this will impair its performance.
Inspección: Inspeccione periódicamente a unidade para detectar calquera signo de dano ou desgaste.

7 Solución de problemas

If you encounter issues with your Aldes EHL air inlet, refer to the following common problems and solutions.

Problema	Causa posible	Solución
Fluxo de aire insuficiente	Air inlet or outer grille is obstructed. Dust accumulation on internal components. Humidity sensor is blocked or faulty. Incorrect installation or sealing.	Comprobe e elimine calquera obstáculo. Clean the air inlet as described in the Maintenance section. Ensure the humidity sensor is clear. If still faulty, contact support. Verify proper installation and sealing.
Ruído excesivo	Loose components or improper sealing. External noise sources. Air inlet operating at maximum flow due to high humidity.	Check mounting screws and seals. Identify and address external noise sources. This is normal operation. Ensure the unit is clean.
Unit Not Adjusting	Humidity sensor is dirty or damaged. Mechanical obstruction of the adjustment mechanism.	Clean the humidity sensor. If still unresponsive, the sensor may be faulty. Inspect for any physical obstructions preventing movement.

If the problem persists after attempting these solutions, please contact Aldes customer support or a qualified technician.

8. Especificacións

Key technical specifications for the Aldes EHL 6-45L 39dB Acoustic Hygro-Adjustable Air Inlet Kit.

Número de modelo: 11014085 (also AJA50015)
Marca: ALDES
Tipo: Hygro-Adjustable Acoustic Air Inlet Kit
Rango de fluxo de aire: 6 to 45 Liters per second (L/s)
Acoustic Attenuation: 39 dB
Cor: Branco
Forma: Rectangular
Fabricante: ALDES AERAULIQUE
Compoñentes incluídos: 1 Product (Air Inlet Unit)
Pilas necesarias: Non
Categoría do produto: Performance Part (HVAC, Ducts)
ASIN: B00DCK2EMW

9. Garantía e soporte

For warranty information, technical support, or to inquire about spare parts, please contact ALDES directly.

Fabricante: ALDES AERAULIQUE
Websitio: www.aldes.com
Atención ao cliente: Refer to the ALDES websitio web para obter información de contacto rexional.
Recambios: Information regarding spare parts availability is not provided in the product specifications. Please contact ALDES customer service for details.

	Aldes EHL L 6-44 m³/h - 39 dB - Branco: Kit de entrada de aire acústico higrométrico Detailed information on the Aldes EHL L hygrometric air inlet kit, including its technical specifications, acoustic performance, dimensions, and installation guidelines. This kit provides adjustable airflow for residential buildings, ensuring optimal air quality and acoustic comfort.
	Aldes EHL S 6-44 m³/h - 37 dB - Branco: Entrada de aire higrorregulada Información detallada sobre a entrada de aire higrorregulada Aldes EHL S, que presenta un rendemento acústico de ata 42 dB, fluxo de aire axustable e fluxo de aire dirixido ao teito. Inclúe especificacións técnicas, dimensións e pautas de instalación.
	Entrada de aire de aluminio Aldes EHL S 6-44 m³/h - 37 dB - Especificacións técnicas Especificacións técnicas detalladas da entrada de aire higrorregulada de aluminio Aldes EHL S 6-44 m³/h - 37 dB, incluíndo características, dimensións, datos acústicos e pautas de instalación.
	Entrada de aire higrorregulada Aldes EHL L 6-44 m³/h - 39 dB antracita Especificacións técnicas e guía de instalación para a entrada de aire higrorregulada Aldes EHL L, modelo 11014138, en antracita. Presenta unha atenuación acústica de ata 42 dB e un caudal de aire axustable de 6 a 44 m³/h.
	Entrada de aire higrorregulada Aldes EHL S 6-44 m³/h - 37 dB - Marrón Technical specifications and installation guide for the Aldes EHL S hygro-regulated air inlet, featuring acoustic performance up to 42 dB, adjustable airflow based on humidity, and a discreet design. Includes dimensions, accessories, and acoustic data.
	Aldes EHL S 6-44 m³/h - 37 dB - Antracita: Entrada de aire higrorregulada Detailed information on the Aldes EHL S hygro-regulated air inlet, featuring acoustic performance up to 42 dB, adjustable airflow based on humidity, and a sleek design. Includes technical specifications, dimensions, and available accessories.

ALDES 11014085

Aldes EHL 6-45L 39dB Acoustic Hygro-Adjustable Air Inlet Kit