1. Introdución
This manual provides essential information for the safe and effective use of your Fluke 117 Digital Multimeter and Fluke 323 True-RMS Clamp Meter combo kit. This kit is designed for residential and commercial electricians, offering productive and effective troubleshooting capabilities.
2. Compoñentes incluídos
Your Fluke 117/323 KIT includes the following items:
- Multímetro dixital Fluke 117
- Fluke 323 True-RMS Clamp Contador
- Cables de proba (vermello e negro)
- Correa magnética para colgar TPAK
- C115 Durable Soft Carrying Case
- 9V Batteries (2 included, pre-installed)
3. Configuración
3.1. Instalación da batería
The Fluke 117 and 323 meters come with 9V batteries pre-installed. If replacement is needed, refer to the detailed instructions in the full user manual for safe battery compartment access.
3.2. Conexión dos cables de proba
Insert the red test lead into the VΩmA jack and the black test lead into the COM jack for voltage, resistance, and continuity measurements. For current measurements with the Fluke 117, insert the red lead into the 10A FUSED jack and the black lead into the COM jack.
3.3. TPAK Magnetic Hanging Strap Assembly
The TPAK magnetic hanging strap allows for hands-free operation. Attach the strap to the back of your multimeter by sliding it into the designated slot until it clicks securely. The magnetic end can then be used to hang the meter on metal surfaces, pipes, or electrical boxes.
3.4. Kit acabadoview Vídeo
Vídeo 1: Este vídeo ofrece unha visión xeralview of the contents included in the Fluke 117/323 combo kit, demonstrating each component and its basic function.
4. Instrucións de funcionamento
4.1. Fluke 117 Digital Multimeter
The Fluke 117 measures AC and DC voltage, as well as AC and DC amps. It features True RMS for accurate measurements on non-linear loads and low input impedance to prevent false readings due to ghost voltage. The VoltAlert™ non-contact voltage detection feature enhances safety by indicating the presence of voltage sen contacto directo.
4.2. Fluke 323 True-RMS Clamp Contador
O Fluke de 323 clamp meter measures 400 A AC current and 600 VAC and DC voltage. It provides True RMS AC voltage and current for accurate measurements on non-linear signals. Use the clamp jaw to measure AC current by clamping it around a single conductor.
4.3. Multimeter Features Video
Video 2: This video highlights key features and functionalities of the Fluke 117 True-RMS Multimeter, including its automatic AC/DC voltage detection and non-contact voltage alerta.
4.4. Clamp Meter Features Video
Video 3: This video details the features of the Fluke 323 Clamp Meter, including its one-handed operation, test lead connections, and AC current measurement capabilities.
5. Mantemento
5.1. Limpeza
Limpar a caixa do contador con anunciosamp cloth and mild detergent. Do not use abrasives or solvents. Clean the test leads by wiping them with a damp pano.
5.2. Substitución da batería
When the battery indicator appears on the display, replace the 9V battery. To replace, open the battery compartment cover on the back of the meter using a screwdriver. Replace with new 9V alkaline batteries, ensuring correct polarity, then secure the cover.
5.3. Test Lead Inspection
Regularly inspect test leads for damaged insulation or exposed metal. Replace damaged leads immediately to ensure safety and accurate measurements.
6 Solución de problemas
If your Fluke 117/323 kit is not functioning as expected, consider the following:
- Sen pantalla/Batería baixa: Comprobe o nivel da batería. Substitúa as baterías se están baixas.
- Lecturas inexactas: Ensure test leads are properly connected and undamaged. Verify the correct function is selected on the rotary dial. For clamp meter current measurements, ensure the clamp está arredor dun único condutor.
- False Voltage Readings (Fluke 117): The low input impedance feature helps prevent ghost voltage readings. If readings are still suspect, ensure proper grounding.
- Sen pitido de continuidade: Check if the continuity function is selected and test leads are making good contact.
For further assistance, refer to the detailed troubleshooting section in the comprehensive user manual or contact Fluke customer support.
7. Especificacións
| Característica | Especificación |
|---|---|
| Marca | Fluke |
| Número de modelo | FLUKE-117/323 KIT |
| Fonte de enerxía | Alkaline (2 x 9V batteries included) |
| Peso do elemento | 1.76 libras (800 gramos) |
| Dimensións do produto | 9 x 30.48 x 3.5 polgadas |
| Tipo de medida | Multímetro, Clamp Contador |
| Precisión de medición | 0.5% + 2 |
| Clasificación de temperatura superior | 752 graos Fahrenheit |
| Valoración de seguridade | UL, CSA (Canada and US), ANSI/ISA, CAN/CSA, CE, C-Tick, TUV, VDE |
| Uso | Profesional |
8. Información da garantía
The Fluke 117/323 Kit comes with a 2 ano de garantía on material and workmanship. Please retain your proof of purchase for warranty claims. For detailed terms and conditions, refer to the warranty card included in your kit or visit the official Fluke websitio.
9. Atención ao cliente
For technical assistance, product inquiries, or service requests, please visit the official Fluke website or contact their customer support line. Contact information can typically be found on the Fluke websitio web ou na documentación que se inclúe co produto.