Introdución
This manual provides essential information for the safe and effective installation, operation, and maintenance of the Mitutoyo PL Series 164 PL-Counter for Linear Scales. Please read this manual thoroughly before using the product and retain it for future reference.
Figure 1: Cover of the Mitutoyo PL Series 164 PL-Counter Operation Manual.
Resumo da seguridade do operador
Adherence to safety guidelines is crucial for preventing injury and equipment damage. Always follow local safety regulations and the specific instructions provided in this manual.
- Ensure the power supply matches the product's specifications.
- Do not operate the device in environments with excessive dust, moisture, or corrosive gases.
- Desconecte a alimentación antes de realizar calquera procedemento de instalación, mantemento ou resolución de problemas.
- Only qualified personnel should perform repairs or internal adjustments.
Instalación e Configuración
1.1 Installation Environment and Precautions
Proper environmental conditions are essential for the PL-Counter's performance and longevity.
- Condicións ambientais: Install in a location free from direct sunlight, excessive vibration, dust, and humidity. Maintain operating temperature within specified limits.
- Mantemento: Regular cleaning and inspection are recommended to ensure optimal performance.
1.2 Montaxe
Securely mount the PL-Counter to a stable surface.
- Mounting the Counter: Use appropriate fasteners to attach the counter to the desired position. Ensure it is level and stable.
- Conexións por cable: Connect all cables (power, linear scale input) according to the wiring diagram. Ensure connections are secure to prevent signal loss or damage.
Instrucións de funcionamento
2.1 Nomenclature and Key Functions
Familiarize yourself with the front panel layout and key functions.
Figure 2: Front panel layout of the Mitutoyo PL-Counter, showing main display, axis designating keys, data entry keys, power switch, and other controls.
2.1.1 Names of Parts on Front Panel
Consulte a Figura 2 para coñecer a localización dos seguintes compoñentes:
- Pantalla principal: Shows measurement values.
- Axis Designating Keys: Selects the active measurement axis.
- Data Entry Keys: Used for numerical input.
- Interruptor de alimentación: Acende / apaga a unidade.
- Zerost Keys: Resets the displayed value to zero for each axis.
- Scale Reference Point Key: Sets or recalls a reference point.
- Parameter Key: Accesses parameter settings.
- Tecla de retención: Freezes the current display value.
- Counting System Select Key: Switches between counting systems.
- mm/inch Conversion Key: Toggles between metric and imperial units.
- Chave de lembranza: Recalls stored values.
- Load Key: Loads specific settings or data.
2.1.2 Funcións clave
| Symbol/Name | Función |
|---|---|
| Zerost Keys | Resets the displayed value to zero for each axis. |
| Axis Designating Keys | Designates the operating axis. |
| mm/inch Conversion Key | Toggles between metric and imperial units. |
| Manteña a tecla | Freezes the current display value. |
2.2 Basic Key Operations
- When power is turned ON: The unit performs a self-check and displays the current measurement.
- Example of key entry of data: Use the numerical keys to input values, followed by the Enter key (if applicable).
- Selecting counting systems: Press the Counting System Select Key to cycle through available counting modes.
- Selecting mm/inch: Press the mm/inch Conversion Key to switch between metric and imperial units.
- Zero setting the display: Press the Zerost Key for the desired axis to set its display to zero.
- Preset - Recall 1/2: Use these functions to store and recall frequently used values or settings.
2.3 Parámetros
- Parameter functions: The PL-Counter offers various parameters to customize its operation.
- Starting up and terminating parameter setting mode: Press the Parameter Key to enter/exit parameter setting mode.
- Configuración de parámetros: Navigate through parameters using arrow keys and adjust values using data entry keys.
2.4 Medición
- Hold function and scale reference point detection: Use the Hold key to pause measurement. The system can detect and utilize scale reference points.
- Reference plane determination using touch signal probe: Connect a touch signal probe for precise reference plane setting.
- Measuring dimensions using touch signal probe: Utilize the probe for accurate dimensional measurements.
- Centering measurement: Perform centering measurements using specific functions.
- Using the two counting systems: Leverage the dual counting systems for complex measurements.
Mantemento
Regular maintenance ensures the longevity and accuracy of your Mitutoyo PL-Counter.
- Limpeza: Gently wipe the display and housing with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- Inspección: Comprobe periodicamente todos os cables e conexións para detectar desgaste ou danos.
- Substitución da batería (se procede): If the unit uses internal batteries for memory backup, refer to the technical data for replacement procedures.
Resolución de problemas
3.1 Guía de resolución de problemas
Esta sección ofrece solucións a problemas comúns.
- Error message and cure: Consult the display for specific error codes and refer to the manual's detailed troubleshooting section for remedies.
- Recovery from wrong key operation: If an incorrect key is pressed, try pressing the Cancel key or restarting the unit.
- General troubleshooting and cure:
- Sen visualización: Check power connection and fuse.
- Medición incorrecta: Verify scale connection, parameter settings, and ensure the scale is clean.
- Unit unresponsive: Power cycle the device. If the issue persists, contact customer support.
Datos técnicos e especificacións
3.2 Especificacións
| Característica | Descrición/Valor |
|---|---|
| Counter types and functions | Multi-axis digital readout for linear scales. |
| Resolution and displayable range | Refer to product label or detailed technical sheet for specific values. |
| Funcións de visualización | 8-digit display, sign indicator, various modes (DIA, RES). |
| Signal input connector and pin assignment | Specific connector type and pinout for linear scale input. |
| Función de conteo | Incremental and absolute measurement, various counting modes. |
| Fonte de enerxía | Adaptador de alimentación de CA (voltage and current specified on unit). |
| Rango de temperatura | Operating: 0°C to 40°C (32°F to 104°F). Storage: -20°C to 60°C (-4°F to 140°F). |
| Dimensions (W x H x D) and weight | Refer to product label or detailed technical sheet. |
| List of special accessories | Optional probes, cables, mounting brackets. |
Supplement 1: Expansion/Contraction Factor
This supplement details the application and adjustment of expansion/contraction factors for precise measurement compensation, particularly in environments with temperature variations. Refer to manual section 029599 for specific calculations and procedures.
Información da garantía
Mitutoyo products are manufactured to high-quality standards. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official Mitutoyo websitio. Garda o comprobante de compra para reclamacións de garantía.
Atención ao cliente
For technical assistance, service, or spare parts, please contact your local Mitutoyo distributor or visit the official Mitutoyo websitio para información de contacto.
Websitio: www.mitutoyo.com
