Beurer 31912

Beurer UB 86 Heated Underblanket Instruction Manual

Model: UB 86 (31912)

1. Produto rematadoview

Thank you for choosing the Beurer UB 86 Heated Underblanket. This product is designed to provide comfortable warmth for your bed. Please read these instructions carefully before first use to ensure safe operation and to prevent damage.

Beurer UB 86 Heated Underblanket with two control units

Image 1.1: The Beurer UB 86 Heated Underblanket with its two independent control units.

2. Instrucións de seguridade importantes

Always observe the following safety instructions to prevent personal injury or material damage:

3. Características do produto

The Beurer UB 86 Heated Underblanket offers a range of features for enhanced comfort and safety:

Close-up of Beurer UB 86 control units showing temperature and timer settings

Imaxe 3.1: Primeiro plano view of the two control units, highlighting the LCD display and individual settings for body and feet zones.

4. Instrucións de configuración

  1. Desempaquetar: Carefully remove the underblanket from its packaging.
  2. Colocación: Lay the underblanket flat on your mattress. Ensure it is spread evenly and not folded or creased. The underblanket should be placed directly on the mattress, underneath your fitted sheet.
  3. Beurer UB 86 Heated Underblanket placed on a mattress

    Image 4.1: Proper placement of the underblanket on a mattress, ensuring it lies flat.

  4. Connect Control Units: Connect the control units to the underblanket. Ensure the connectors are firmly inserted.
  5. Conexión de alimentación: Plug the power cords of the control units into suitable electrical outlets.
  6. Cover with Sheet: Place your fitted sheet over the underblanket and mattress.

5. Instrucións de funcionamento

Each side of the underblanket is controlled independently by its own control unit.

  1. Encendido: Press the ON/OFF button on the control unit. The display will illuminate.
  2. Configuración de temperatura:
    • Use the body temperature button to select a temperature level for the body zone (1-9).
    • Use the foot temperature button to select a temperature level for the foot zone (1-9).
    • Level 1 is the lowest heat, Level 9 is the highest.
  3. Rapid Heating (Turbo Function): For quick pre-heating, select a higher temperature level (e.g., 9). The underblanket will reach its desired temperature in approximately 15 minutes.
  4. Axustar o temporizador:
    • Press the timer button to adjust the operating time.
    • The timer can be set in 1-hour increments.
    • The underblanket will automatically switch off after the set time.
  5. EcoControl Display: The display shows the current kWh consumption, allowing you to monitor energy usage.
  6. Apagado automático de seguridade: The Beurer Safety System (BSS) automatically switches off the underblanket in case of overheating. Additionally, temperature levels 7, 8, and 9 will automatically reset to level 6 after 3 hours of continuous operation.
  7. Apagado: Press the ON/OFF button again to switch off the underblanket. The display will turn off. Always unplug the unit from the wall socket when not in use for extended periods.

6. Mantemento e Limpeza

Proper care ensures the longevity and hygiene of your heated underblanket.

  1. Antes da limpeza: Always unplug the underblanket from the power outlet and disconnect the control units from the underblanket. Allow it to cool down completely.
  2. Lavado a máquina:
    • The underblanket is machine washable up to 30°C (gentle cycle).
    • Use un deterxente suave.
    • Do not bleach, iron, dry clean, or tumble dry.
  3. Lavado de mans: If preferred, the underblanket can be hand washed in lukewarm water with a mild detergent.
  4. Secado:
    • Gently squeeze out excess water.
    • Hang the underblanket to air dry completely. Do not use clothespins directly on the heating wires.
    • Ensure the underblanket is completely dry before reconnecting the control units and using it again.
  5. Almacenamento: When not in use, store the underblanket in a clean, dry place. Avoid placing heavy objects on it to prevent damage to the heating elements.
Close-up of the soft fleece fabric of the Beurer UB 86 Heated Underblanket

Image 6.1: The soft fleece material of the underblanket, designed for comfort and easy maintenance.

7 Solución de problemas

If you encounter any issues with your Beurer UB 86, please refer to the following common problems and solutions:

ProblemaCausa posibleSolución
A manta interior non quenta.
  • Non conectado correctamente.
  • Control unit not connected properly.
  • Safety system (BSS) activated.
  • Toma de corrente defectuosa.
  • Check if the power plug is fully inserted into the outlet.
  • Ensure the control unit is securely connected to the underblanket.
  • Unplug the unit, wait 5 minutes, then plug it back in. If the issue persists, contact customer service.
  • Proba a toma con outro aparello.
A manta debaixo quéntase de xeito desigual.
  • A manta interior está dobrada ou engurrada.
  • Internal heating element damage.
  • Ensure the underblanket is spread flat on the mattress.
  • Deixar de usar e contactar co servizo de atención ao cliente.
Control unit display is not working.
  • Problema de potencia.
  • Avaría da unidade de control.
  • Comprobe a conexión de alimentación.
  • Contacte co servizo de atención ao cliente.

If the problem persists after trying these solutions, please contact Beurer customer service.

8. Especificacións técnicas

EspecificaciónDetalle
ModeloUB 86 (31912)
Dimensións (L x W)Aprox. 160 cm x 150 cm
Potencia de saída2 x 60 vatios
MaterialSoft fleece (top and bottom)
Niveis de temperatura9 per zone (body and feet)
Sistema de seguridadeSistema de seguridade Beurer (BSS)
Apagado automáticoAdjustable timer, automatic reset from levels 7, 8, 9 to 6 after 3 hours.
LavabilidadeMachine washable up to 30°C (with removable controls)
CorCrema

9. Garantía e soporte

Beurer ofrece unha garantía para este produto. Consulta a tarxeta de garantía incluída coa túa compra para coñecer os termos e condicións específicos, incluído o período de garantía e os detalles da cobertura. Conserva o comprobante de compra para calquera reclamación de garantía.

For technical support, spare parts, or service inquiries, please contact Beurer customer service. Contact information can typically be found on the official Beurer websitio web ou na documentación que se inclúe co produto.

Recursos en liña: For additional information, FAQs, or to register your product, visit the official Beurer websitio: www.beurer.com