1. Introdución
This manual provides detailed instructions for the installation, operation, and maintenance of your ICY BOX IB-254U3 External USB 3.0 Enclosure. This device is designed to house a 2.5-inch SATA I/II/III Hard Disk Drive (HDD) or Solid State Drive (SSD), transforming it into a portable external storage solution with high-speed USB 3.0 connectivity and UASP support.
Lea este manual detidamente antes de usar o produto para garantir o seu correcto funcionamento e evitar danos.
2. Contido do paquete
- ICY BOX IB-254U3 Enclosure
- Funda protectora de silicona
- Cable USB 3.0
- Manual de usuario (este documento)
3. Produto rematadoview
The ICY BOX IB-254U3 features a durable aluminum housing for efficient heat dissipation and a removable silicone sleeve for added protection. It supports 2.5-inch SATA drives up to 9.5mm in height and offers tool-free installation for convenience.
Imaxe 1: Fronte view of the ICY BOX IB-254U3 external enclosure, encased in its protective silicone sleeve.
Imaxe 2: Primeiro plano view of the USB 3.0 port and the green LED indicator on the side of the enclosure.
4. Configuración e instalación
Follow these steps to install your 2.5-inch SATA HDD or SSD into the ICY BOX IB-254U3 enclosure.
- Retirar a funda de silicona: Gently slide the silicone protective sleeve off the aluminum enclosure.
- Recinto aberto: Slide the internal tray out from the aluminum housing. This is a tool-free process.
- Instalar o disco duro/SSD: Connect your 2.5-inch SATA HDD or SSD to the SATA connector on the internal tray. Ensure the drive is securely seated. The enclosure supports drives up to 9.5mm in height.
- Unidade segura: If a protective film is provided, apply it to the underside of the drive's PCB to prevent short circuits.
- Pechar o recinto: Carefully slide the internal tray, with the installed drive, back into the aluminum housing until it clicks into place.
- Re-attach Silicone Sleeve: Slide the silicone protective sleeve back onto the enclosure for enhanced protection.
Image 3: The ICY BOX IB-254U3 enclosure with the silicone sleeve removed, revealing the aluminum casing and the internal drive tray partially visible.
Imaxe 4: De arriba abaixo view of the ICY BOX IB-254U3 enclosure with the internal drive tray fully inserted into the aluminum housing.
Imaxe 5: En ángulo view of the ICY BOX IB-254U3 enclosure with the silicone protective sleeve fully re-attached, ready for use.
5. Instrucións de funcionamento
5.1 Conectando a un ordenador
Use the provided USB 3.0 cable to connect the enclosure to an available USB port on your computer (PC, Mac, or Linux system). For optimal performance, connect to a USB 3.0 port.
- Connect the micro-B end of the USB 3.0 cable to the enclosure's port.
- Connect the standard USB-A end of the cable to your computer's USB port.
5.2 Indicador LED
The enclosure features an LED indicator:
- Verde sólido: Indicates the enclosure is powered on and connected.
- Verde intermitente: Indicates data activity (read/write operations) on the installed drive.
5.3 Drive Recognition and Formatting
Upon connecting, your operating system should automatically detect the new storage device. If the drive is new, it may need to be initialized, partitioned, and formatted before use. Refer to your operating system's documentation for instructions on disk management.
5.4 UASP Support
The IB-254U3 supports UASP (USB Attached SCSI Protocol), which can significantly increase data transfer speeds, especially with SSDs, when connected to a UASP-enabled USB 3.0 port on a compatible operating system (e.g., Windows 8/10/11, macOS, Linux).
6. Mantemento
- Limpeza: Use a soft, dry cloth to clean the enclosure. Avoid liquid cleaners or abrasive materials.
- Almacenamento: Garda a caixa nun lugar fresco e seco, lonxe da luz solar directa e de temperaturas extremas.
- Manexo: While the silicone sleeve provides protection, avoid dropping or subjecting the enclosure to strong impacts.
- Eliminación segura: Always safely eject or unmount the drive from your operating system before disconnecting the USB cable to prevent data corruption.
7 Solución de problemas
- Unidade non detectada:
- Asegúrate de que o cable USB estea conectado correctamente tanto á carcasa como ao ordenador.
- Proba a conectarte a un porto USB diferente do teu ordenador.
- Verify that the HDD/SSD is correctly installed and seated within the enclosure's SATA connector.
- Consulta a Xestión de discos (Windows) ou a Utilidade de discos (macOS) do teu ordenador para ver se a unidade se recoñece pero non está inicializada ou non formateada.
- Test the HDD/SSD in another enclosure or directly connect it to a computer (if possible) to rule out drive failure.
- Velocidades lentas de transferencia de datos:
- Ensure you are connected to a USB 3.0 port on your computer. USB 2.0 ports will operate at significantly lower speeds.
- Verify that your operating system and drivers support UASP for optimal performance.
- Check the health and fragmentation status of your installed HDD/SSD.
- O indicador LED non se acende:
- Confirm the USB cable is properly connected and providing power.
- Proba cun porto ou cable USB diferente.
8. Especificacións
| Característica | Descrición |
|---|---|
| Modelo | IB-254U3 |
| Marca | CAIXA DE XEO |
| Compatibilidade con unidades | 2.5-inch SATA I/II/III HDD/SSD |
| Altura máxima de conducción | 9.5 mm |
| Interface interna | SATA III (up to 6 Gbit/s) |
| Interface Externa | USB 3.0 (up to 5 Gbit/s) with UASP |
| Material | Aluminio, plástico, silicona |
| Dimensións (L x W x H) | 12.7 x 8.2 x 1.7 cm |
| Peso | 170 g |
| Soporte do sistema operativo | Windows, macOS, Linux |
| Fonte de alimentación | Alimentado por USB |
9. Garantía e soporte
ICY BOX products are covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty information provided with your purchase or visit the official ICY BOX website. For technical support or further assistance, please contact your retailer or the ICY BOX customer support team.
Conserve o seu comprobante de compra para reclamacións de garantía.
