SCHLAGE F51A FLA 619 Flair Entry Lockset User Manual

1. Introdución

This manual provides detailed instructions for the installation, operation, and maintenance of your SCHLAGE F51A FLA 619 Flair Entry Lockset. Please read all instructions carefully before beginning installation to ensure proper function and to avoid damage to the product or property.

Image 1.1: The SCHLAGE F51A FLA 619 Flair Entry Lockset, featuring a satin nickel finish and flair design. This lockset is designed for entry doors, providing security and functionality.

2. Información de seguridade

Always follow basic safety precautions when installing or maintaining door hardware. Failure to do so may result in injury or property damage.

• Use equipo de protección individual axeitado, como lentes de seguridade, durante a instalación.
• Asegúrese de que todos os compoñentes estean ben fixados antes do uso.
• Do not use power tools at excessive speeds, which could damage the lockset or door.
• Manteña as pezas pequenas lonxe dos nenos.

3. Contido do paquete

Verify that all parts are present before beginning installation. If any parts are missing or damaged, contact SCHLAGE customer support.

• Exterior Flair Handle/Knob Assembly
• Interior Flair Handle/Knob Assembly
• Latch Mechanism (Triple Option)
• Strike Plates (Dual)
• Parafusos de montaxe
• Chaves
• Modelo de instalación (se está incluído)

Note: The specific components may vary slightly based on the exact product configuration.

4. Ferramentas necesarias

Normalmente necesítanse as seguintes ferramentas para a instalación:

• Destornillador Phillips
• Cinta métrica
• Lapis
• Wood Block (for drilling, if necessary)
• Drill with appropriate bits (if new door preparation is required)

5. Configuración e instalación

This section outlines the general steps for installing the SCHLAGE F51A FLA 619 Flair Entry Lockset. Refer to the included installation template for precise measurements and drilling instructions if preparing a new door.

5.1 Prepare the Door

1. Check Door Preparation: Ensure your door has the correct bore holes (typically 2-1/8 inches for the lock body and 1 inch for the latch) and backset (2-3/8 inches or 2-3/4 inches). The F51A FLA 619 features a universal triple option latch to accommodate both backsets.
2. Axustar o pestillo: If necessary, adjust the latch to the correct backset. The triple option latch allows for easy adjustment.

5.2 Install the Latch

1. Insert the latch into the edge bore hole of the door, ensuring the bevel of the latch bolt faces the door frame.
2. Secure the latch with the provided screws. Ensure it is flush with the door edge.

5.3 Install the Exterior Assembly

1. Insert the exterior handle/knob assembly through the 2-1/8 inch bore hole, ensuring the spindle engages with the latch mechanism.
2. Make sure the key cylinder is oriented correctly.

5.4 Install the Interior Assembly

1. Align the interior handle/knob assembly with the exterior assembly, ensuring the mounting posts and spindle are correctly engaged.
2. Secure the interior assembly to the exterior assembly using the provided mounting screws. Tighten screws evenly until snug, but do not overtighten.

5.5 Install the Strike Plate

1. Pecha a porta e marca o centro do pestillo no marco da porta.
2. Fai unha embutida para o peche de xeito que quede aliñado co marco da porta.
3. Fixe a placa de peche cos parafusos proporcionados.

5.6 Test Operation

After installation, test the lockset's function:

• Turn the interior knob/lever to ensure the latch retracts smoothly.
• Use the key from the exterior to ensure the lock engages and disengages properly.
• Ensure the door latches securely when closed.

6. Funcionamento

The SCHLAGE F51A FLA 619 Flair Entry Lockset is designed for standard entry door use, offering both keyed entry from the exterior and a turn-button or push-button locking mechanism from the interior.

6.1 Locking from the Exterior

Insert the key into the exterior cylinder and turn it to lock or unlock the door. Remove the key once the desired state is achieved.

6.2 Locking from the Interior

From the interior, rotate the turn-button or push the button (depending on the specific mechanism) to lock the door. The door can typically be unlocked from the interior by turning the knob/lever, or by using the key from the exterior.

7. Mantemento

Proper maintenance ensures the longevity and smooth operation of your lockset.

• Limpeza: Clean the lockset with a soft, damp pano. Evite produtos de limpeza abrasivos, solventes ou produtos químicos agresivos, xa que poden danar o acabado.
• Lubricación: Periodically apply a small amount of graphite lubricant or a silicone-based lubricant to the keyway and latch mechanism to ensure smooth operation. Do not use oil-based lubricants, as they can attract dirt and dust.
• Apertura: Check mounting screws periodically and tighten if necessary. Do not overtighten.

8 Solución de problemas

If you encounter issues with your lockset, refer to the following common problems and solutions:

If these solutions do not resolve the issue, contact SCHLAGE customer support for further assistance.

9. Especificacións

10. Información da garantía

The SCHLAGE F51A FLA 619 Flair Entry Lockset comes with the following warranties:

• Garantía de acabado: 10-year finish warranty.
• Garantía mecánica: Limited Lifetime Mechanical Warranty.

For detailed terms and conditions, please refer to the official SCHLAGE warranty documentation or visit the Tenda SCHLAGE.

11. Atención ao cliente

If you require further assistance, have questions about installation, or need to report a warranty claim, please contact SCHLAGE customer support. Contact information can typically be found on the SCHLAGE official websitio web ou na embalaxe do produto.

Tamén podes visitar o oficial Tenda SCHLAGE en Amazon para obter información sobre produtos e recursos.