TOA Electronics BS-1030W Music/Paging Speaker User Manual

1. Introdución

This manual provides essential instructions for the safe and efficient use of your TOA Electronics BS-1030W Music/Paging Speaker. Please read this manual thoroughly before installation and operation, and retain it for future reference.

Imaxe 1.1: Fronte view of the TOA BS-1030W Music/Paging Speaker in white. The speaker features a white ABS resin enclosure and a steel mesh grille, with the TOA logo visible at the bottom center.

2. Precaucións de seguridade

Observe sempre as seguintes precaucións de seguridade para evitar lesións persoais e danos materiais.

• Instalación: Ensure the speaker is securely mounted to a structure capable of supporting its weight. Incorrect installation may cause the speaker to fall, resulting in injury.
• Potencia: Conecte o altofalante a un amplifier with appropriate power output and impedance. Overloading can damage the speaker.
• Ambiente: While the speaker has splash-proof construction (IPX3), avoid direct exposure to heavy rain or prolonged submersion. Do not install in locations with extreme temperatures or high humidity beyond specified operating conditions.
• Servizo: Do not attempt to open or modify the speaker. Refer all servicing to qualified personnel.

3. Características clave

• 2-Way Bass-Reflex Design: Features a 4.72" (12 cm) cone woofer and a 1" (dome-type) tweeter for a wide frequency response (80 Hz - 20 kHz).
• Versatile Impedance Options: Selectable between low impedance (8 Ohms) and high impedance (100V/70V line) via a rotary switch.
• Construción a proba de salpicaduras: IPX3 compliant, allowing installation under eaves where direct rain exposure is limited.
• Carcasa duradeira: Constructed with ABS resin and a steel mesh grille, both in white (RAL9010 PURE WHITE).
• Entrada clasificada: 30 W.
• Nivel de presión sonora: 90 dB (1 W, 1 m).

4. Configuración e instalación

4.1 Contido do paquete

Comprobe que estean presentes todos os compoñentes antes de continuar coa instalación:

• TOA BS-1030W Speaker Unit
• Soporte de montaxe
• Manual de instrucións (este documento)
• (Additional mounting hardware may be required depending on installation surface, not included)

4.2 Consideracións de montaxe

The BS-1030W speaker is designed for wall mount or floor standing applications. The included bracket facilitates secure wall mounting.

• Choose a mounting location that can structurally support the speaker's weight (approximately 5.5 pounds).
• For outdoor use, install the speaker under eaves or in a sheltered area to protect it from direct heavy rain, leveraging its IPX3 splash-proof rating.
• Ensure adequate space around the speaker for proper sound dispersion and heat dissipation.

4.3 Impedance Selection and Wiring

The speaker features a rotary switch on the rear for selecting between low impedance (8 Ohms) and various high impedance (100V/70V line) tap settings. Asegurar o amplifier is turned OFF before making any impedance selections or wiring connections.

1. Select Impedance: Rotate the switch to the desired setting (e.g., 8Ω for low impedance, or a specific wattage tap for 100V/70V line systems). Refer to your amplifier's specifications for compatible impedance and power requirements.
2. Conecte os cables dos altofalantes: The speaker is equipped with a 2-core cabtyre cord. Connect these wires to the appropriate speaker output terminals on your amplifier. Observe correct polarity (+ to +, - to -).
3. Conexións seguras: Asegúrate de que todas as conexións dos cables estean axustadas e seguras para evitar ruídos intermitentes ou curtocircuítos.

5. Funcionamento

Once the speaker is securely installed and wired, you can begin operation.

1. Encendido: Acende o teu amplifier and any connected audio sources.
2. Axuste de volume: Comeza co amplifier volume at its lowest setting and gradually increase it to a comfortable listening level. Avoid excessively high volumes that may cause distortion or damage to the speaker.
3. Fonte de audio: Play audio from your connected device (e.g., music player, microphone for paging).

6. Mantemento

Regular maintenance helps ensure the longevity and optimal performance of your speaker.

• Limpeza: Wipe the speaker enclosure and grille with a soft, dry cloth. For stubborn dirt, use a slightly damp cloth and mild detergent, then wipe dry. Do not use abrasive cleaners, solvents, or strong chemicals.
• Inspección: Periodically check mounting hardware for tightness and signs of wear. Inspect speaker wires for any damage.
• Protección ambiental: Ensure the speaker remains protected from direct, heavy weather conditions to maintain its splash-proof integrity.

7 Solución de problemas

Se tes problemas co teu altofalante, consulta os seguintes problemas e solucións comúns:

8. Especificacións

9. Garantía e soporte

TOA products are manufactured to high quality standards. This product comes with a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official TOA websitio.

For technical support, service, or replacement parts, please contact your authorized TOA dealer or distributor. Do not attempt to repair the unit yourself, as this may void your warranty.