Fluke T130 Voltage e Tester de continuidade
Model: FLUKE-T130
Marca: Fluke
Introdución
O Fluke T130 Vol.tage and Continuity Tester is a robust and reliable tool designed for electrical professionals. It features large, easy-to-use buttons, a bright backlit LED indicator, an LCD display, display hold, and clear audible and vibrating voltage indicators. This two-pole tester is essential for verifying the absence of voltage before working on any circuit, ensuring user safety and accurate measurements.
Image: The Fluke T130 Voltage and Continuity Tester, showing its yellow body, black probes, backlit LCD, and LED indicators.
Información de seguridade
Always observe standard safety precautions when working with electrical equipment. Failure to do so may result in injury or damage to the tester or equipment under test.
- Lea e comprenda todas as instrucións antes do uso.
- Do not use the tester if it appears damaged or operates abnormally.
- Verifica o funcionamento do probador nunha fonte de corrente activa coñecida antes e despois do seu uso.
- Cumprir os códigos de seguridade locais e nacionais.
- Use equipos de protección individual (EPI) adecuados.
- The tester is designed according to IEC EN 61243-3:2014 to verify the absence of voltage, even with discharged batteries.
- CAT IV 600 V, CAT III 690 V safety rating.
O que hai na caixa
The Fluke T130 package typically includes the following items:
- Fluke T130 Voltage e Tester de continuidade
- Rubber tip protector
- 2x GS38 Probe Tip Sheath
- 2x 4 mm Ø Probe Extensions
- 2 AA batteries (pre-installed or included separately)
Configuración
Instalación de baterías
The Fluke T130 requires 2 AA batteries for operation. These are typically included. To install or replace batteries:
- Localice a tapa do compartimento das baterías na parte traseira do probador.
- Use a suitable tool (e.g., a screwdriver) to open the compartment.
- Insert the 2 AA batteries, ensuring correct polarity (+ and -).
- Peche ben a tapa do compartimento da batería.
Probe Tip Accessories
Attach the appropriate probe tip accessories (GS38 Probe Tip Sheath or 4 mm Ø Probe Extensions) as required for your measurement application. Ensure they are securely fitted to the probe tips.
Instrucións de funcionamento
The Fluke T130 offers multiple ways to indicate the presence of voltage, including LED indicators, an LCD display, an audible tone, and tactile feedback (vibration).
Voltage Medición
- Ensure the tester is clean and in good working condition.
- Connect the two probes to the circuit or component you wish to test.
- The tester will automatically detect AC or DC voltage and display the reading on the LCD.
- LED indicators will illuminate corresponding to voltage levels (e.g., 12V, 24V, 50V, 120V, 230V, 400V, 690V).
- An audible tone and vibration will also indicate the presence of voltage.
- Use the "Display Hold" function to freeze the reading on the LCD if needed.
Proba de continuidade
- Asegúrese de que o circuíto estea desenergizado antes de realizar unha proba de continuidade.
- Connect the two probes across the component or wire you want to test for continuity.
- If continuity is present (low resistance), the continuity LED will illuminate, and an audible tone will sound.
Switchable Load (Ghost Voltage Suppression)
The T130 features a switchable load function to avoid the display of "ghost voltages" (induced voltages in open circuits). Press the designated button to activate the load, which draws more current from the circuit under test, allowing for a more accurate voltage reading and preventing nuisance tripping of Residual Current Devices (RCDs).
Indicación de rotación de fase
For three-phase systems, the T130 can indicate phase rotation. Follow the instructions in the full user manual for detailed steps on performing this test.
Mantemento
Limpeza
Clean the tester's case with a damp cloth and mild detergent. Do not use abrasives or solvents. Ensure the tester is dry before storage or use.
Substitución da batería
Replace batteries when the low battery indicator appears on the LCD or when the tester's performance degrades. Refer to the "Battery Installation" section under Setup for instructions.
Almacenamento
Garda o comprobador nun lugar seco e fresco, lonxe da luz solar directa e de temperaturas extremas. Se o gardas durante períodos prolongados, retira as pilas para evitar fugas.
Resolución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| O probador non se acende. | Baterías gastadas ou instaladas incorrectamente. | Substitúa as pilas, asegurándose de que a polaridade sexa correcta. |
| Vol. imprecisotage lecturas. | Pantasma voltages; poor probe contact. | Activate switchable load; ensure firm probe contact. |
| Sen indicación de continuidade. | Open circuit; faulty component. | Verify circuit integrity; test component separately. |
| LCD display is dim or flickering. | Batería baixa. | Substitúe as pilas. |
Especificacións
| Característica | Detalle |
|---|---|
| Número de modelo | FLUKE-T130 |
| Valoración de seguridade | CAT IV 600 V, CAT III 690 V |
| Fonte de enerxía | Alimentado por pilas (inclúe 2 pilas AA) |
| Dimensións do produto | 13.39 x 3.43 x 2.24 polgadas |
| Peso do elemento | 0.28 quilogramos (9.88 onzas) |
| Mostrar | Backlit LCD readout, LED indicators |
| Voltage Indicación | LED, LCD, Audible Tone, Tactile Feedback (Vibration) |
| Cable Durability | Dual insulated cable tested to 3x required bend angle |
| Características especiais | Switchable load (ghost voltage suppression), Display Hold |
| Fabricante | Fluke |
| País de Orixe | Reino Unido |
Garantía e Soporte
Fluke products are known for their quality and reliability. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Fluke websitio.
Atención ao cliente
For technical assistance, troubleshooting, or service, please contact Fluke customer support. Contact information can typically be found on the Fluke websitio ou na embalaxe do produto.
When contacting support, please have your product model number (FLUKE-T130) and serial number (if applicable) ready.
