Produto rematadoview
The Cen-Tech 6/12V Circuit Tester is a diagnostic tool designed to quickly check for the presence of electrical current in 6-volt and 12-volt DC systems. It features a durable construction with a needle point probe and an integrated indicator light to confirm circuit activity.
Información importante de seguridade
Read and understand all safety warnings and instructions before using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Use sempre lentes de seguridade aprobados pola ANSI durante o uso.
- Do not use this circuit tester on AC voltage or circuits exceeding 12 volts DC.
- Ensure the alligator clip has a secure and clean ground connection before probing.
- Evite o contacto con compoñentes eléctricos activos.
- Keep hands and clothing away from moving parts when working on vehicles.
- Inspeccione a ferramenta para comprobar se está danada antes de cada uso. Non a use se está danada.
- Manter fóra do alcance dos nenos.
Configuración
The Cen-Tech 6/12V Circuit Tester requires minimal setup. Ensure the tool is clean and free from any visible damage before beginning your work.
- Uncoil the lead wire and ensure it is not tangled or kinked.
- Confirm the needle point probe is securely attached and not bent.
Instrucións de funcionamento
Follow these steps to test for voltage in 6V or 12V DC circuits:
- Prepare the Circuit: Ensure the circuit you intend to test is accessible and safe to work on.
- Conectar a terra: Attach the alligator clip of the circuit tester to a reliable ground source. For vehicle applications, this is typically the negative terminal of the battery or a clean, unpainted metal part of the chassis. A good ground connection is essential for accurate readings.
- Probe the Circuit: Carefully touch the needle point probe to the wire, terminal, or component you wish to test. Ensure firm contact.
- Observe Indicator Light: If electrical current is present at the point of contact, the indicator light within the tester's handle will illuminate. The brightness of the light may vary with voltage, but its illumination confirms current flow.
- Interpretar os resultados: If the light illuminates, the circuit is live. If the light does not illuminate, there is no current, or the circuit is open at that point.
- Desconectar: After testing, carefully remove the probe from the circuit and then disconnect the alligator clip from the ground source.
Mantemento
Proper maintenance ensures the longevity and reliability of your circuit tester.
- Limpeza: After each use, wipe the probe and handle with a clean, dry, soft cloth to remove any dirt, grease, or moisture.
- Almacenamento: Store the circuit tester in a dry, clean environment, away from direct sunlight, extreme temperatures, and corrosive materials.
- Inspección: Periodically inspect the lead wire for cuts, fraying, or damage. Check the probe for bends or corrosion. Replace the unit if any damage is found.
Resolución de problemas
Consulta a táboa seguinte para ver os problemas comúns e as súas solucións.
| Problema | Causa posible | Solución |
|---|---|---|
| Indicator light does not illuminate on a known live circuit. | Poor or no ground connection. | Ensure the alligator clip is securely connected to a clean, reliable ground source. |
| Indicator light is dim. | Baixo voltage in the circuit or poor contact. | Verify the circuit voltage is within the 6-12V range. Ensure good contact with both the probe and the ground. |
| Tester appears physically damaged. | Physical impact or wear. | Discontinue use immediately. Replace the unit to ensure safety and accurate testing. |
Especificacións
- Marca: Cen-Tech
- Número de modelo: CECOMINOD036567
- Vol. Operativotage: 6 V / 12 V CC
- Lonxitude do cable: 5 pés.
- Tipo de sonda: Needle Point
- Material do mango: Heavy duty high impact plastic
- Peso do artigo: 16 onzas (1 libra)
- Fonte de enerxía: Corded Electric (relies on circuit power)
- Tipo de medida: Voltmeter (indicates presence of voltage)
- UPC: 784672317917
Información da garantía
For specific warranty details, please refer to the documentation provided at the time of purchase or contact the retailer directly. Warranty terms typically cover manufacturing defects for a limited period.
Atención ao cliente
If you have questions or require assistance with your Cen-Tech 6/12V Circuit Tester, please contact the retailer where the product was purchased or refer to Cen-Tech's official customer service channels for support.
