1. Introdución
This manual provides detailed instructions for the installation, operation, and maintenance of your Leviton Decora Slide Dimmer Switch, Model DSL06-1LZ. This dimmer switch is designed to provide smooth, full-range dimming for dimmable LED, incandescent, and halogen bulbs, allowing you to customize the light level in any room. Please read these instructions carefully before beginning installation to ensure proper function and safety.
2. Información de seguridade
ADVERTENCIA: PARA EVITAR INCENDIOS, DESCARGAS OU MORTE; DESCONECTE A CORRIENTE NO INTERRUPTOR OU FUSIBLE E PROBA QUE ESTÁ APAGADO ANTES DE CABLEAR!
- Este dispositivo debe instalarse de acordo con todos os códigos eléctricos nacionais e locais.
- Use só arame de cobre ou revestido de cobre.
- Non o use con lámpadas non regulables.
- Se non está seguro de algunha destas instrucións, consulte cun electricista cualificado.
- Asegurar o wat totaltage of connected bulbs does not exceed the dimmer's maximum rating (300W for LED/CFL, 600W for Incandescent/Halogen).
3. Que hai na caixa
- One DSL06-1LZ Decora Slide Dimmer Switch
- Placa frontal branca
- Ivory faceplate
- Light Almond faceplate
4. Características
- Smooth Slide-Action: Ofrece un control preciso dos niveis de luz.
- Interruptor de acendido/apagado separado: Preserves the set light level when turned off and back on.
- Ampla compatibilidade: Works with dimmable LED, Halogen, and Incandescent bulbs (300W LED/CFL, 600W Incandescent/Halogen).
- Fácil instalación: Slim profile fits most wallboxes; no neutral wire required.
- Rango de atenuación axustable: Customize minimum and maximum light levels for optimal performance and energy savings with LED bulbs.
- Aplicación versátil: Can be used in single-pole (one location) or 3-way (two locations) installations when paired with a 3-way switch.
- Color Change Kits: Includes white, ivory, and light almond faceplates for aesthetic flexibility.
5. Configuración e instalación
Follow these steps for safe and proper installation of your dimmer switch.
- Apagar a enerxía: Locate the circuit breaker or fuse that controls the light switch you are replacing and turn off the power. Verify power is off using a voltagprobador.
- Eliminar o interruptor antigo: Carefully remove the existing wallplate and unscrew the old switch from the wallbox. Disconnect the wires from the old switch.
- Identificar os cables:
- Cableado (condutor): Typically black, brings power from the circuit breaker.
- Cable de carga: Normalmente negro, vai para a lámpada.
- Fío de terra: Bare copper or green, connects to the metal wallbox or ground screw.
- Traveler Wires (for 3-way installations only): Two wires (often red and black or red and white) that connect to another 3-way switch.
- Conecta o atenuador: Connect the wires to the DSL06-1LZ dimmer switch according to the wiring diagram provided with the product. This dimmer does not require a neutral wire. Ensure all connections are secure.
Imaxe: Costas view of the DSL06-1LZ dimmer switch, highlighting wiring terminals and its slim design for easy installation.
- Montar o atenuador: Gently push the wired dimmer switch into the wallbox. Secure it with the mounting screws.
- Instalar placa frontal: Attach the desired Decora wallplate (white, ivory, or light almond included).
Image: The DSL06-1LZ dimmer switch shown with its interchangeable white, ivory, and light almond faceplates.
- Restaurar enerxía: Turn the power back on at the circuit breaker or fuse.
5.1 Single-Pole vs. 3-Way Installation
The DSL06-1LZ supports both single-pole and 3-way applications:
- Polo único: Controla as luces desde un só lugar.
- 3 vías: Controls lights from two locations when paired with a standard 3-way switch (sold separately). This is ideal for hallways or large rooms with multiple entrances.
Image: Visual comparison of single-pole and 3-way wiring setups for the dimmer switch.
6. Instrucións de funcionamento
The DSL06-1LZ dimmer switch offers intuitive control over your lighting.
- Control On/Off: Press the large rocker switch to turn the lights ON or OFF. The dimmer will return to the previously set light level.
- Control de atenuación: Use the small slide bar located next to the rocker switch to adjust the brightness. Slide it up to increase brightness and down to decrease it.
- Adjustable Dimming Range (for LED bulbs): The dimmer features a mode selector (A/B) to fine-tune the minimum and maximum dimming levels for optimal LED performance and to prevent flickering. Refer to the detailed instructions included with your product for how to access and adjust this setting.
Image: Detail of the A/B mode selector, used to fine-tune the dimming range for LED bulbs.
7. Mantemento
The Leviton Decora Slide Dimmer Switch requires minimal maintenance.
- Limpeza: To clean the dimmer switch and faceplate, wipe with a soft, damp pano. Non use produtos de limpeza ou disolventes abrasivos.
- Inspección: Periodically inspect the switch for any signs of damage or loose connections. If any issues are found, turn off power at the circuit breaker and consult a qualified electrician.
8 Solución de problemas
If you encounter issues with your dimmer switch, refer to the following common solutions:
| Problema | Causa posible | Solución |
|---|---|---|
| Lights do not turn ON/OFF or dim. | No power, incorrect wiring, or non-dimmable bulbs. | Check circuit breaker. Verify wiring connections. Ensure bulbs are dimmable. |
| As luces parpadean ou zumbizan. | Incompatible bulbs, incorrect dimming range setting, or loose connections. | Ensure bulbs are compatible with dimmers. Adjust the A/B mode selector for LED bulbs. Check wiring connections. |
| O regulador quéntase. | Funcionamento normal ou circuíto sobrecargado. | Slight warmth is normal. If excessively hot, reduce load or consult an electrician. Ensure total wattage does not exceed rating. |
| Lights do not dim to desired low level. | Minimum dimming level not adjusted for LED bulbs. | Adjust the minimum dimming level using the A/B mode selector. |
9. Especificacións
- Número de modelo: DSL06-1LZ
- Modo de operación: ON-OFF-ON
- Valoración actual: 1 Amps
- Vol. Operativotage: 120 voltios
- Wattage: 300W for Dimmable LED/CFL, 600W for Incandescent/Halogen
- Frecuencia: 60 Hz
- Tipo de circuíto: Unipolar ou de 3 vías
- Cor: White (with Ivory and Light Almond faceplates included)
- Dimensións (L x W x H): 1.75 x 1.74 x 4.13 polgadas
- Peso do artigo: 0.16 onzas
- Material: Plastic, Brass
- Fabricante: Leviton Direct
10. Garantía e soporte
Leviton products are backed by a limited warranty. For specific warranty details, product registration, technical support, or to find additional resources, please visit the official Leviton websitio web ou póñase en contacto co servizo de atención ao cliente. Garde o recibo da compra como proba de compra para reclamacións de garantía.
Recursos en liña: www.leviton.com
11. Produto rematadoview
The Leviton Decora Slide Dimmer Switch offers a modern aesthetic and functional upgrade to traditional toggle switches, providing precise lighting control for various settings.
