InSinkErator Instant Hot Water Tank HWT-00 Instruction Manual

Introdución

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your InSinkErator Instant Hot Water Tank, Model HWT-00. Please read all instructions carefully before use.

The InSinkErator HWT-00 Instant Hot Water Tank is designed to provide near-boiling water (approximately 200 degrees F inside the tank) directly at your kitchen sink. This 2/3-gallon stainless steel tank features an easily adjustable thermostat and a 750-watt heating element for quick and convenient hot water access.

Información importante de seguridade

ADVERTENCIA: Este produto pode expoñelo a produtos químicos, incluído o chumbo, que o Estado de California sabe que causa cancro e defectos de nacemento ou outros danos reprodutivos. Para máis información vai a www.P65Warnings.ca.gov.

Siga sempre as precaucións de seguridade básicas ao usar electrodomésticos para reducir o risco de incendio, descarga eléctrica e lesións persoais.

• Le todas as instrucións antes de usar o aparello.
• Non toque superficies quentes. Use asas ou botóns.
• Para protexerse contra descargas eléctricas, non mergulle o cable, os enchufes ou o aparello en auga ou noutro líquido.
• É necesaria unha estreita supervisión cando calquera aparello é usado por nenos ou preto de eles.
• Desenchufe da toma cando non estea en uso e antes de limpalo. Deixar arrefriar antes de poñer ou quitar pezas.
• Non faga funcionar ningún aparello cun cable ou enchufe danados ou despois de que o aparello funcione mal ou teña dano dalgún xeito. Devolve o aparello ao centro de servizo autorizado máis próximo para o seu exame, reparación ou axuste.
• O uso de accesorios non recomendados polo fabricante do aparello pode causar lesións.
• Non use ao aire libre.
• Non deixes que o cable colgue do bordo da mesa ou do mostrador nin toque superficies quentes.
• Non o coloque sobre ou preto dun queimador eléctrico ou de gas quente, nin nun forno quente.
• Conecte sempre primeiro o enchufe ao electrodoméstico e, a seguir, o cable á toma de corrente. Para desconectalo, poña calquera control na posición de apagado e, a seguir, retire o enchufe da toma de corrente.
• Non use o aparello para outros usos que os previstos.

O que hai na caixa

Your InSinkErator Instant Hot Water Tank package includes:

• 2/3-Gallon Stainless Steel Instant Hot Water Tank (HWT-00)

Note: Faucet and water filtration system are sold separately.

Configuración e instalación

The InSinkErator HWT-00 is designed for easy DIY installation under your sink. Ensure you have a standard under-sink outlet available for the tank's power cord.

Pasos de instalación terminadosview:

1. Preparar a zona: Clear the under-sink cabinet space. Ensure access to cold water supply and a grounded electrical outlet.
2. Montar o tanque: Securely mount the tank in an upright position within the under-sink cabinet. The tank features tool-free connections for convenience.
3. Conectar as liñas de auga: Connect the cold water supply line to the tank's inlet. Connect the hot water outlet from the tank to your instant hot water faucet (sold separately). Ensure all connections are secure to prevent leaks.
4. Install Faucet (if applicable): If installing a new faucet, follow the faucet's specific instructions. The HWT-00 is compatible with all InSinkErator instant hot water faucets.
5. Conectar enerxía: Once all water connections are secure and the tank is filled with water, plug the tank's power cord into the standard under-sink outlet. The unit includes dry start protection.
6. Limpar o sistema: Before first use, flush the system according to the faucet's instructions to remove any air and ensure proper operation.

Visual Guide: Installation Components

Image: The InSinkErator HWT-00 Instant Hot Water Tank, showcasing its compact design suitable for under-sink installation.

Image: A close-up of the InSinkErator HWT-00 tank, highlighting its adjustable temperature dial for precise heat control.

Instrucións de funcionamento

Your InSinkErator HWT-00 Instant Hot Water Tank is designed for simple operation, providing near-boiling water on demand.

Axuste de temperatura:

• The tank features an easily adjustable thermostat. Locate the temperature control knob on the front of the tank.
• Turn the knob to adjust the desired water temperature. The manufacturer's recommended setpoint is approximately 200 degrees F for optimum performance.
• Allow a few minutes for the water to reach the newly set temperature after adjustment.

Distribución de auga quente:

• To dispense hot water, activate your compatible InSinkErator instant hot water faucet (sold separately) according to its specific operating instructions.
• The tank will continuously supply near-boiling water as long as the faucet is activated, up to its 2/3-gallon capacity.

Uso Examples:

Image: A person filling a teapot with hot water from an instant hot water faucet, demonstrating its use for hot beverages.

Image: A person preparing a baby bottle with hot water from an instant hot water faucet, highlighting its convenience for quick tasks.

Image: A person filling a cooking pot with hot water from an instant hot water faucet, illustrating its use for accelerating cooking processes.

Image: A person cleaning a bowl with hot water from an instant hot water faucet, showing its utility for cleaning and sanitizing.

Mantemento

Proper maintenance ensures the longevity and optimal performance of your InSinkErator Instant Hot Water Tank.

Water Filter Compatibility:

• The HWT-00 tank is compatible with InSinkErator under-sink water filtration systems (sold separately).
• Using a compatible filter can help reduce contaminants like PFOA/PFOS, herbicides, pesticides, VOCs, lead, mercury, asbestos, chlorine, and more, improving water taste and quality.
• Refer to your filter system's instructions for recommended replacement schedules, typically every 6 months.

Resolución de problemas

If you encounter issues with your InSinkErator Instant Hot Water Tank, please refer to the following common troubleshooting tips:

• Sen auga quente:
  • Check if the unit is plugged into a working electrical outlet.
  • Ensure the temperature control knob is set to a desired hot temperature.
  • Verify that the water supply valve to the tank is fully open.
  • Allow sufficient time for the tank to heat water, especially after initial setup or if the tank was recently drained.
• Auga non o suficientemente quente:
  • Axuste o botón de control da temperatura a unha configuración máis alta.
  • Ensure the tank is not being overused, which might temporarily reduce water temperature.
• Filtración:
  • Check all water connections for tightness. Ensure they are hand-tightened and then given an additional quarter turn with a wrench.
  • Inspect hoses for any visible damage or kinks.
  • If a filter is installed, ensure it is correctly seated and not leaking.
• Fluxo de auga lento:
  • If a water filter is installed, it might be clogged and require replacement.
  • Check the water supply valve for full opening.

If problems persist, please contact InSinkErator customer support for assistance.

Especificacións

Garantía e Soporte

Your InSinkErator Instant Hot Water Tank is backed by a 3-Year "We Come to You" Limited Warranty. For full details, please refer to the product warranty documentation included with your purchase or visit the official InSinkErator websitio.

For technical support, troubleshooting assistance, or warranty claims, please contact InSinkErator customer service.