Introdución
This manual provides essential information for the assembly, painting, and care of your Tamiya British Dingo II Armored Scout Car model kit. The Daimler Scout Car, known as the 'Dingo', was a British light reconnaissance vehicle used during World War II. This 1/48 scale model kit accurately reproduces its features, including interior details, a multi-piece upper hull, chassis, wheels, suspension, and optional folding roof. Two figures, a driver and a commander, are also included.
Información de seguridade
Please read and understand all safety warnings before beginning assembly. This kit contains small parts and requires the use of sharp tools, adhesives, and paints. Adult supervision is recommended for users under 15 years of age.
- Pezas pequenas: Manteña as pezas pequenas lonxe dos nenos pequenos para evitar riscos de asfixia.
- Ferramentas afiadas: Ten coidado ao usar coitelos, cortadores e outras ferramentas afiadas. Corte sempre lonxe do corpo.
- Adhesivos e pinturas: Use in a well-ventilated area. Avoid prolonged skin contact and inhalation of fumes. Refer to the specific product's safety data sheet for detailed information.
- Protección ocular: Consider wearing eye protection when cutting or sanding parts.
Contido do kit
Your Tamiya British Dingo II Armored Scout Car model kit includes:
- Plastic sprues containing vehicle parts, figures, and accessories.
- Decal sheet for markings.
- Instruction booklet (separate from this general guide).
Image: Various plastic parts for the Dingo II model kit, still attached to their sprues.
Ferramentas recomendadas
Recoméndanse as seguintes ferramentas para a montaxe:
- Pinzas angulares
- Coitelo Cortador
- Decal Scissors
- Side Cutters (for plastic)
- Basic Brush Set
- Masking Tape (10mm with dispenser)
- Tamiya Plastic Cement (40ml)
- Tamiya Extra Thin Plastic Cement (40ml)
- Tamiya Mark Fit (Strong) Decal Softener (40ml)
- Tamiya Decal Adhesive Soft (10ml)
Image: The product box for the Tamiya British Armored Scout Car 'Dingo' Mk.II, showing the 1/48 scale and artwork of the vehicle in a street scene.
Pinturas recomendadas
For accurate representation, the following Tamiya paints are recommended:
XF-Acrylic Paints (Flat)
- XF-1 Black (23ml)
- XF-10 Brown (23ml)
- XF-15 Flesh (23ml)
- XF-49 Khaki (23ml)
- XF-52 Earth (23ml)
- XF-56 Metallic Grey (23ml)
- XF-61 Dark Green (23ml)
- XF-64 Red Brown (23ml)
- XF-85 Rubber Black (10ml)
X-Acrylic Paints (Gloss)
- X-11 Chrome Silver (23ml)
- X-18 Black (23ml)
- X-20A Thinner (23ml)
TS-Spray Paints (100ml)
- TS-2 Dark Green
- TS-6 Matt Black
Montaxe (Configuración)
Follow the detailed step-by-step instructions provided in the kit's dedicated instruction booklet. General steps include:
- Preparación da peza: Carefully remove parts from the sprues using side cutters. Clean any excess plastic (flash) with a hobby knife or sanding stick.
- Subconxuntos: Assemble smaller components first, such as the chassis, wheels, and interior details.
- Asemblea principal: Join the larger sections of the vehicle, ensuring proper alignment. The kit allows for the roof to be assembled in either an open or closed position.
- Montaxe da figura: Assemble the driver and commander figures according to the instructions.
- Accesorios adxuntos: Attach separately molded tools, equipment, and jerry cans.
Imaxe: Unha detallada view of the model's interior, showing the driver's seat, steering wheel, and dashboard, with a painted driver figure in place.
Image: A fully assembled and painted Tamiya British Dingo II Armored Scout Car model, viewed from the rear-right, with a commander figure standing in the open hatch.
Finishing and Painting
Once assembly is complete, prepare the model for painting. Clean the surface to remove any dust or grease. Apply primer if desired, then proceed with painting using the recommended colors or your preferred scheme. After painting, apply the decals according to the kit's instructions for authentic markings.
Image: A rear-left view of the assembled Tamiya Dingo II model, showing the detailed rear section and wheels.
Care and Display (Maintenance)
To maintain the appearance of your finished model:
- Desempolvado: Regularly dust the model with a soft brush or compressed air to prevent accumulation.
- Manexo: Handle the model carefully to avoid breaking delicate parts.
- Entorno de visualización: Display the model away from direct sunlight, extreme temperatures, and high humidity to prevent fading or warping.
Image: A fully assembled and painted Tamiya British Dingo II Armored Scout Car model, vieweditado desde a parte dianteira dereita, mostrandoasing its camouflage pattern and detailed exterior.
Especificacións
| Característica | Detalle |
|---|---|
| Marca | TAMIYA |
| Nome do modelo | British Dingo II Armored Scout Car |
| Número de modelo | TM32581 |
| Escala | 1/48 |
| Material | Plástico |
| Dimensións do artigo (L x W x H) | 2.6 x 1.4 x 1.23 inches (approximate finished size) |
| Idade recomendada | 15 anos en diante |
Apoio
For questions regarding missing parts, assembly issues, or general inquiries about your Tamiya model kit, please refer to the contact information provided in the original kit packaging or visit the official Tamiya websitio web con recursos de atención ao cliente.
Información da garantía
Tamiya products are manufactured to high-quality standards. Any warranty claims or issues related to manufacturing defects should be directed to the retailer where the product was purchased or to Tamiya customer service, as per their official warranty policy. Please retain your proof of purchase.
