TC Electronic T2 Reverb Effects Pedal User Manual

Introdución

The TC Electronic T2 Reverb effects pedal provides a diverse range of reverb effects for guitar and other instruments. This manual details the pedal's features, setup procedures, operational guidelines, maintenance tips, troubleshooting steps, and technical specifications to ensure optimal performance.

Produto rematadoview

The T2 Reverb pedal features intuitive controls for shaping your sound and a robust design for reliable use. Familiarize yourself with the pedal's components:

Botón DECAY: Controla a lonxitude da cola de reverberación.
Mando de ton: Adjusts the brightness or darkness of the reverb.
Botón MIX: Balances the ratio between the dry (unaffected) signal and the wet (effected) signal.
Selector de tipo de reverberación: A rotary switch to select from various reverb algorithms (I-VIII, E1, E2, TP).
Pedal: Activa ou evita o efecto.
Conectores de entrada / saída: For connecting your instrument and ampmáis vivo.
Entrada de enerxía: For connecting a 9V DC power supply.

TC Electronic T2 Reverb Pedal top view showing Decay, Tone, Mix knobs, Reverb Type selector, and footswitch. — Figura 1: Arriba view of the TC Electronic T2 Reverb pedal, highlighting the control knobs and footswitch.

En ángulo view of TC Electronic T2 Reverb Pedal showing input and output jacks. — Figura 2: En ángulo view of the TC Electronic T2 Reverb pedal, illustrating the input and output jacks on the sides.

Configuración

Conexión de alimentación: Connect a 9V DC power adapter (center negative, not included) to the power input jack. Alternatively, the pedal can be powered by a 9V battery (not included) by opening the battery compartment.
Conexión do instrumento: Connect your instrument (e.g., guitar) to the input jack on the right side of the pedal using a standard 1/4-inch instrument cable.
AmpConexión de lifier: Conecte a toma de saída do lado esquerdo do pedal ao seu amplifier's input using a standard 1/4-inch instrument cable.
Stereo Operation (Optional): For stereo output, connect the second output jack to a second amplifter ou dispositivo de entrada estéreo.

Asegúrate de que todas as conexións estean seguras antes de acender o teu amplifier and pedal.

Instrucións de funcionamento

Operación básica

Encendido: Once connected, press the footswitch to engage the effect. The LED indicator will illuminate. Press again to bypass the effect.
Selecting Reverb Type: Rotate the Reverb Type Selector knob to choose from the available reverb algorithms (I through VIII, E1, E2). Each setting offers a distinct reverb character.
Adjusting Reverb Parameters:
- Usa o DECADENCIA knob to control the duration of the reverb.
- Usa o TONO knob to adjust the frequency content of the reverb, making it brighter or darker.
- Usa o MESTURA knob to blend the dry signal with the reverb effect. A higher setting increases the effect's prominence.

TonePrint Feature

The "TP" setting on the Reverb Type Selector activates the TonePrint feature. TonePrint allows you to upload custom-tuned reverb sounds created by artists or design your own using the TC Electronic TonePrint app. Connect your pedal to a computer via USB (cable not included) or beam TonePrints wirelessly from your smartphone to the pedal's pickup.

Mantemento

Limpeza: Usa un pano suave e seco para limpar o exterior do pedal. Evita produtos de limpeza abrasivos ou solventes.
Substitución da batería: If using battery power, replace the 9V battery when the LED indicator dims or the effect performance degrades. To replace, open the battery compartment on the underside of the pedal.
Almacenamento: Store the pedal in a dry environment, away from extreme temperatures and direct sunlight, when not in use. Disconnect power and remove the battery if storing for extended periods.

Resolución de problemas

Problema	Causa posible	Solución
Sen son ou sinal débil	Incorrect cable connections, dead battery, faulty power supply, volume knobs on instrument/amp apagado.	Check all cable connections. Replace battery or verify power supply. Ensure instrument and amplifier volumes are set appropriately.
Ruído ou zumbido non desexado	Ground loop, faulty cables, interference from other electronics, improper power supply.	Use shielded cables. Try a different power outlet or isolated power supply. Move pedal away from other electronic devices.
Effect not engaging (LED off)	No power, faulty footswitch.	Verify power connection and battery status. If problem persists, contact support.
TonePrint not loading	Incorrect app usage, connection issues.	Ensure the TonePrint app is updated and the pedal is correctly connected (USB or beaming). Refer to the TonePrint app's instructions for detailed guidance.

Especificacións

Modelo: T2
Peso do artigo: 1 pound (approximately 454 grams)
Dimensións do produto: 4.61 x 2.48 x 2.91 polgadas (11.7 x 6.3 x 7.4 cm)
Fonte de enerxía: Adaptador de corrente de 9 V CC (negativo central) ou batería de 9 V
Voltage: 9 voltios
Formato do sinal: Analóxico
Interface de hardware: HP-HSC

Garantía e Soporte

TC Electronic products are covered by a limited warranty. For detailed warranty information, product support, or service inquiries, please visit the official TC Electronic websitio web ou póñase en contacto directamente co servizo de atención ao cliente. Garde o comprobante de compra para reclamacións de garantía.

Oficial Websitio: www.tcelectronic.com

	Guía de inicio rápido de TC Electronic Hall of Fame 2 Reverb Unha guía concisa do pedal de reverberación Hall of Fame 2 de TC Electronic, que abrangue os seus controis, características e funcionamento básico. Inclúe información sobre conectividade USB, edición de TonePrint, función MASH e cumprimento da normativa FCC.
	Guía de inicio rápido do TC Electronic Hall of Fame 2 Mini Reverb Unha guía concisa do pedal de efectos TC Electronic Hall of Fame 2 Mini Reverb, que abrangue controis, conexións e información de conformidade.
	Guía de inicio rápido de TC Electronic Skysurfer Reverb Unha guía concisa do TC Electronic Skysurfer Reverb, que detalla os seus controis, conexións e características para efectos de reverberación con calidade de estudio.
	TC Electronic INFINITE SAMPGuía de inicio rápido de LE SUSTAINER Guía de inicio rápido e concisa para o TC Electronic INFINITE SAMPPedal de efectos para guitarra LE SUSTAINER, que detalla os seus controis, características e funcionamento básico.
	Manual do usuario de Reverb do Salón da Fama de TC Electronic Manual de usuario completo para o pedal de reverberación Hall of Fame de TC Electronic, que abrangue instrucións de seguridade, características, controis, tipos de reverberación, TonePrint, modos de bypass e especificacións técnicas.
	Guía de inicio rápido de TC Electronic PLETHORA X5: Pedaleiro TonePrint con interruptores de pé MASH Comeza rapidamente co TC Electronic PLETHORA X5, un pedal TonePrint versátil con cinco interruptores de pé MASH. Aprende sobre os seus controis, características, especificacións e como transferir TonePrints.

TC Electronic T2