1. Introdución
This manual provides comprehensive instructions for the installation, operation, and maintenance of your 1byone OUSQH-0535 Easy Chime Wireless Doorbell Kit. This kit includes two plug-in receivers and one push button, designed to provide a reliable and convenient notification system for your home or office. Please read this manual thoroughly before use to ensure proper functionality and safety.
2. Contido do paquete
Verifica que todos os elementos estean presentes no teu paquete:
- 2 x 1byone Plug-in Receivers
- 1 x 1byone Wireless Push Button
- 1 x AAA Battery (pre-installed in push button)
- Mounting Hardware (screws and adhesive tape)
Figure 2.1: Complete 1byone Wireless Doorbell Kit
3. Características do produto
- Rango sen fíos estendido: Operates up to 100 meters (300 feet) in open areas, ensuring reliable signal transmission throughout most homes.
- Multiple Chime Tones: Offers 36 selectable CD-quality melodies.
- Volume axustable: Three volume levels ranging from 25dB to 85dB.
- Alerta visual: Integrated LED flash provides a visual notification, beneficial for the hearing impaired or noisy environments.
- Weatherproof Push Button: IP44 rated for outdoor use, protecting against dust and splashing water.
- Sistema ampliable: Supports adding additional 1byone chimes or push buttons.
- Fácil instalación: Simple plug-and-play setup for receivers and flexible mounting options for the push button.
Figure 3.1: Wireless Range Illustration
4. Identificación de compoñentes
4.1. Plug-in Receiver
Figure 4.1: Receiver Controls and Features
- Sound/LED Flash Switch: Toggles between sound only, LED flash only, or sound and LED flash modes.
- Enchufe: For connecting to a standard electrical outlet.
- Axuste de volume: Cycles through three volume levels (low, medium, high).
- Melody Selector: Cycles through the 36 available chime melodies.
- Auto-learning Code Button: Used for pairing the receiver with a push button.
4.2. Wireless Push Button
Figure 4.2: Wireless Push Button
- Botón: Activates the doorbell chime.
- Indicador LED: Illuminates when the button is pressed, confirming signal transmission.
- Compartimento de batería: Located on the back, houses the AAA battery.
5. Configuración
5.1. Installing the Push Button
- Instalación da batería: The push button comes with a pre-installed AAA battery. If replacement is needed, carefully open the back cover to access the battery compartment. Ensure correct polarity.
- Lugar de montaxe: Choose a flat, vertical surface near your door. Ensure the location is easily accessible to visitors and within the wireless range of your receivers.
- Opcións de montaxe:
- Cinta adhesiva: Peel off the protective film from the included double-sided adhesive tape and firmly press the push button onto the desired surface for at least 30 seconds.
- Parafusos: Use the provided screws and wall anchors to securely fasten the push button to the wall. It is recommended to apply a small amount of silicone sealant around the screw holes on the back of the button to enhance weather resistance.
5.2. Installing the Receivers
- Select a standard electrical outlet in a central location within your home or in areas where you wish to hear the chime.
- Plug the receiver directly into the electrical outlet. The receiver will power on.
- Repeat for the second receiver in another desired location.
5.3. Pairing the Push Button with Receivers (Auto-Learning)
The push button and receivers are typically pre-paired at the factory. If they do not work out of the box, or if you wish to add additional push buttons/receivers, follow these steps:
- Plug the receiver into an electrical outlet.
- Manteña premido o Botón de código de autoaprendizaxe on the receiver for approximately 5 seconds until the receiver emits a 'ding' sound and its LED indicator flashes. This indicates it is in pairing mode.
- Immediately press the wireless push button. The receiver will chime, confirming successful pairing.
- Test the pairing by pressing the push button. The receiver should chime.
- Repeat this process for any additional receivers you wish to pair with the same push button.
6. Funcionamento
6.1. Cambiando as melodías
To select a different melody:
- Preme o Selector de melodías button on the side of the receiver. Each press will cycle to the next available melody.
- Stop pressing when you hear your desired melody. The selected melody will be saved.
6.2. Axuste do volume
To change the volume level:
- Preme o Axuste de volume button on the side of the receiver. Each press will cycle through the three available volume levels (low, medium, high).
- Selecciona o nivel de volume que mellor se adapte ao teu entorno.
6.3. Sound and LED Flash Modes
To switch between notification modes:
- Usa o Sound/LED Flash Switch on the side of the receiver.
- Toggle the switch to select sound only, LED flash only, or both sound and LED flash.
7. Mantemento
7.1. Push Button Battery Replacement
When the push button's LED indicator no longer illuminates or the signal becomes unreliable, it's time to replace the battery.
- Carefully open the back cover of the push button. Note that the cover may be tight to ensure weather resistance.
- Retire a pila AAA vella.
- Insert a new AAA battery, ensuring correct positive (+) and negative (-) polarity.
- Pecha de forma segura a tapa traseira.
- Test the push button with the receivers to confirm functionality.
7.2. Limpeza
To clean the doorbell components, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse any part in water.
8 Solución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| O receptor non soa o timbre. | Receptor non acendido. Push button battery low/dead. Non emparellado. Fóra de rango. | Ensure receiver is plugged into a live outlet. Replace push button battery. Re-pair the push button and receiver (Section 5.3). Move receiver closer to push button. |
| O timbre soa aleatoriamente. | Interferencias doutros dispositivos sen fíos. Factores ambientais. | Re-pair the push button and receiver to reset the code (Section 5.3). Ensure no other strong radio frequency devices are directly adjacent to the doorbell components. |
| Receiver loses pairing after power cut. | Temporary power interruption. | Re-pair the push button and receiver (Section 5.3). |
| Push button difficult to open for battery replacement. | Tight seal for weather protection. | Use a small, flat tool to gently pry open the cover. Exercise caution to avoid damage. |
| Sound quality not as expected. | Subjective perception. Speaker limitations. | While the system offers 36 melodies, sound quality can vary. Ensure volume is set appropriately. |
9. Especificacións
| Característica | Detalle |
|---|---|
| Nome do modelo | OUSQH-0535 |
| Marca | 1 por un |
| Cor | Negro |
| Material | Metal (components may include plastic) |
| distancia wireless | Ata 100 metros (300 pés) |
| Melodías | 36 seleccionables |
| Niveis de volume | 3 (25dB to 85dB) |
| Valoración do botón pulsador | IP44 (resistente á intemperie) |
| Batería de botón | 1 x AAA (incluídos) |
| Alimentación do receptor | AC Plug-in (Voltage: 12V, Power Consumption: <5W) |
| Peso do elemento | Aproximadamente 7.8 onzas (0.49 libras) |
| Dimensións do produto | Receivers: 4.72 x 3.15 x 4.72 inches Push Button: 3.42 x 1.38 inches (approx.) |
Figura 9.1: Dimensións do produto
10. Información de seguridade
- Do not expose the push button to extreme temperatures or direct sunlight for prolonged periods.
- Ensure receivers are plugged into easily accessible outlets for quick disconnection if needed.
- Do not attempt to disassemble or repair the product yourself. Refer all servicing to qualified personnel.
- Manteña as baterías fóra do alcance dos nenos. Desfágase das baterías usadas segundo a normativa local.
- Avoid placing receivers near strong electromagnetic fields, which may interfere with operation.
11. Garantía e soporte
For warranty information or technical support, please contact 1byone customer service through their official website or the retailer where the product was purchased. Please have your model number (OUSQH-0535) and purchase details ready.
