Stayer SCE 1650 WMC Miter Saw User Manual

1. Introdución

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Stayer SCE 1650 WMC Miter Saw. This versatile tool is designed for precise cutting of various materials including iron, aluminum, plastic, and wood. Please read this manual thoroughly before initial use and keep it for future reference.

2. Instrucións de seguridade

Siga sempre as precaucións de seguridade básicas para reducir o risco de incendio, descarga eléctrica e lesións persoais. O incumprimento destas instrucións pode provocar lesións graves.

• Le todas as instrucións: Familiarize yourself with the tool's controls and proper use.
• Use protección ocular: Use sempre lentes de seguridade ou lentes de seguridade con escudos laterais.
• Usar protección auditiva: Use tapóns ou auriculares durante o funcionamento.
• Peza de traballo segura: Sempre clamp ou doutro xeito asegurar a peza de traballo para evitar o movemento durante o corte.
• Manteña as mans claras: Never place hands near the cutting blade.
• Manter unha zona de traballo limpa: As áreas desordenadas invitan a accidentes.
• Non opere en atmosferas explosivas: Non use ferramentas eléctricas en presenza de líquidos ou gases inflamables.
• Desconectar antes dos axustes: Always disconnect the saw from the power source before making any adjustments, changing accessories, or performing maintenance.
• Usa a lámina correcta: Ensure the blade is appropriate for the material being cut and is sharp and undamaged.
• Evitar o exceso de alcance: Manter en todo momento unha posición e un equilibrio adecuados.

3. Produto rematadoview

The Stayer SCE 1650 WMC is a robust miter saw featuring a durable aluminum base and upper table. It includes an electronic speed variator for optimized cutting across different materials.

Figura 1: Acabadoview of the Stayer SCE 1650 WMC Miter Saw. This image shows the complete miter saw unit, highlighting its red base, silver cutting table, and the main motor housing with the blade guard. The adjustable fence and clamping mechanisms are also visible.

Compoñentes clave:

• Aluminum Base and Upper Table: Ofrece estabilidade e durabilidade.
• Electronic Variator: Allows adjustment of blade speed.
• Mecanismo de inclinación: Enables bevel cuts up to 45°.
• Swiveling Table: Features self-locking positions for miter cuts at 22.5°, 45°, and 90°.
• Porto de extracción de po: Para conectar un sistema de recollida de po.

4. Configuración

Before operating the miter saw, ensure it is properly set up and secured.

1. Desembalaxe: Carefully remove all components from the packaging. Verify that all included items are present: SCE 1650 WMC miter saw, Widia TCT Z-52 blade, parallel guide, 2 horizontal clamps, and service wrench.
2. Montaxe: Securely mount the miter saw to a stable workbench using appropriate fasteners.
3. Instalación da lámina: Ensure the Widia TCT Z-52 blade (Ø 254 x 3 x 30 mm) is correctly installed and tightened according to the instructions provided with the blade. Always unplug the saw before installing or changing blades.
4. Parallel Guide and Clamps: Install the parallel guide and horizontal clamps as needed for your specific cutting task to secure the workpiece.
5. Extracción de po: Connect a suitable dust extraction system to the designated port to maintain a clean work environment.

5. Instrucións de funcionamento

The Stayer SCE 1650 WMC is designed for precise cuts in various materials. Always ensure the workpiece is stable and secured before cutting.

5.1. Control de potencia e velocidade

• The saw operates at 1600W power.
• Use the electronic variator to adjust the no-load speed between 2500 and 4000 RPM (Giri/min) depending on the material being cut. Lower speeds are generally suitable for harder materials or larger cuts, while higher speeds are for softer materials or finer finishes.

5.2. Facer cortes

1. Straight Cuts (0°): Position the workpiece against the fence. Ensure the swiveling table is locked at 0°. Maximum cutting capacity: 50 x 100 mm.
2. Miter Cuts (Angled Horizontal Cuts): Adjust the swiveling table to the desired angle (e.g., 22.5°, 45°). The table has self-locking positions for common angles. Maximum cutting capacity at 45°: 32 x 100 mm.
3. Bevel Cuts (Angled Vertical Cuts): Tilt the saw head up to 45° to the left or right. Maximum cutting capacity at 45° inclined: 150 x 20 mm or 90 x 50 mm.
4. Compound Cuts (Miter and Bevel): Combine miter and bevel adjustments for complex angles. Maximum cutting capacity at 45° miter and 45° bevel: 75 x 20 mm.
5. General Cutting Capacity:
   • 90° (Straight): 155 x 25 mm / 65 x 77 mm
   • 45° Right/Left (Miter): 103 x 30 mm / 55 x 77 mm
   • 45° Inclined (Bevel): 150 x 20 mm / 90 x 50 mm
   • 45° Compound (Miter & Bevel): 75 x 20 mm
6. Operación: Lower the blade slowly into the workpiece, allowing the blade to reach full speed before contact. Apply steady, even pressure. Once the cut is complete, allow the blade to stop rotating before raising it from the workpiece.

6. Mantemento

Regular maintenance ensures the longevity and safe operation of your Stayer SCE 1650 WMC Miter Saw. Always unplug the tool before performing any maintenance.

• Limpeza: Regularly clean dust and debris from the saw, especially around the motor vents, blade guard, and cutting table. Use compressed air for hard-to-reach areas.
• Inspección da lámina: Inspect the blade before each use for sharpness, cracks, or missing teeth. Replace dull or damaged blades immediately.
• Inspección de cepillos: The motor uses brushes. Periodically inspect the carbon brushes for wear and replace them when they are worn down to their limit. Refer to a qualified service technician if unsure.
• Lubricación: Apply light machine oil to moving parts and pivot points as recommended in a more detailed service manual (if available) or as needed to ensure smooth operation.
• Comprobación de fixación: Comprobe periodicamente que todas as porcas, parafusos e tornillos estean ben axustados. Aperte calquera elemento de fixación solto.

7 Solución de problemas

Esta sección aborda problemas comúns que podes atopar coa túa serra de biselado.

8. Especificacións

Technical specifications for the Stayer SCE 1650 WMC Miter Saw:

• Modelo: SCE1650WMC
• Potencia: 1600 W
• Voltage: 230 voltios (CA)
• Velocidade sen carga: 2500 – 4000 RPM (Giri/min)
• Diámetro da lámina: Ø 254 mm
• Diámetro da lámina: 30 mm
• Material da lámina: Tungsten Carbide (Widia TCT Z-52)
• Fonte de enerxía: Eléctrico con cable
• Peso: 16.5 kg
• Cutting Capacity (Max):
  • 90° (Straight): 155 x 25 mm / 65 x 77 mm
  • 45° Right/Left (Miter): 103 x 30 mm / 55 x 77 mm
  • 45° Inclined (Bevel): 150 x 20 mm / 90 x 50 mm
  • 45° Compound (Miter & Bevel): 75 x 20 mm

9. Garantía

STAYER products are manufactured to high-quality standards. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your product or visit the official STAYER websitio web para obter termos e condicións detallados da garantía. Garda o comprobante de compra para reclamacións de garantía.

10. Apoio

For technical assistance, spare parts, or service inquiries, please contact your local STAYER dealer or authorized service center. You can also visit the official STAYER website for further support information and contact details.

Websitio: www.stayer.es (Example, real URL pode variar)