1. Produto rematadoview
The DS18 EXL-SQ4 is a 4-inch 2-way coaxial car speaker designed for high sound quality. It features a glass fiber cone and a 3-ohm impedance, providing clear audio reproduction for various car audio systems.
Características principais:
- 2-Way Coaxial Speaker Design
- 4-Inch Woofer Size
- 3-Ohm Rated Impedance
- 60 Watts RMS Power, 260 Watts Max Power
- Sensibilidade 85 dB
- Frequency Response: 115 - 22 KHz
- Glass Fiber Woofer Cone with Rubber Surround
- PEI Dome Tweeter with Neodymium Magnet
2. Que hai na caixa
- DS18 EXL-SQ4 4-Inch Coaxial Speakers (Set of 2)
- Speaker Grills (Included)
3. Especificacións
| Característica | Especificación |
|---|---|
| Deseño de altofalantes | Coaxial de 2 vías |
| Tamaño do woofer | 4 polgadas |
| Diámetro do tweeter | 21 mm (0.8 polgadas) |
| Impedancia nominal | 3 ohmios |
| Potencia RMS | 60 vatios |
| Potencia máxima | 260 vatios |
| Sensibilidade | 85 dB |
| Resposta en frecuencia | 115 - 22 kHz |
| Diámetro do orificio de montaxe | 100.5 mm |
| Top Mount Depth (No Grill) | 56.4 mm |
| Top Mount Depth (With Grill) | 73.77 mm |
| Bottom Mount Depth Diameter | 27.4 mm |
| Material do cono do woofer | Fibra de vidro |
| Material envolvente do woofer | Goma |
| Material de cúpula do tweeter | PEI |
| Material do imán do tweeter | Neodimio |
| Dimensións do produto | 4" D x 4" W x 5.5" H |
| Peso do elemento | 16 onzas (1 libra) |
| Dispositivos compatibles | Sistema de audio para coche |
4. Configuración e instalación
Proper installation is crucial for optimal performance and longevity of your DS18 EXL-SQ4 speakers. It is recommended to have installation performed by a qualified professional.
4.1 Consideracións de montaxe
- Ensure adequate mounting depth and clearance for the speaker. Refer to the 'Specifications' section for dimensions.
- Choose a mounting location that provides a stable and secure surface to prevent vibrations.
- The speakers are designed for car mount and coaxial installation.
4.2 Instrucións de cableado
- Disconnect the vehicle's battery before starting any wiring.
- Conecte o terminal positivo (+) do altofalante á saída positiva (+) do seu ampmáis vivo.
- Conecte o terminal negativo (-) do altofalante á saída negativa (-) do seu ampmáis vivo.
- Asegúrate de que todas as conexións estean seguras e debidamente illadas para evitar curtocircuítos.
- Verify the impedance of your speakers matches the recommended load of your amplifier. These speakers have a 3-ohm impedance.
5. Instrucións de funcionamento
Once installed, follow these guidelines for operating your DS18 EXL-SQ4 speakers:
- Comeza co amplifier's gain settings at their lowest level.
- Gradually increase the volume and adjust the gain settings to achieve desired sound levels without distortion.
- Avoid prolonged listening at maximum volume levels to prevent speaker damage.
- For optimal sound quality, consider using a high-pass filter to prevent low frequencies from reaching the speakers, especially if a subwoofer is present in your system.
6. Mantemento
To ensure the longevity and performance of your speakers, regular maintenance is recommended:
- Keep the speaker cones and surrounds free from dust and debris. Use a soft, dry cloth for cleaning.
- Avoid exposing speakers to extreme temperatures or moisture.
- Comprobe periodicamente todas as conexións do cableado para comprobar se están ben apertadas e se presentan corrosión.
- Ensure the speaker grills are securely in place to protect the cones from physical damage.
7 Solución de problemas
If you encounter issues with your DS18 EXL-SQ4 speakers, refer to the following common troubleshooting steps:
- Sen son: Comprobe todas as conexións de cableado do amplifier to the speakers. Ensure the amplifier is powered on and functioning correctly. Verify audio source is active.
- Son distorsionado: Reduce the volume or amplifier gain. Check for loose wiring connections. Ensure the speakers are not over-powered or under-powered by the ampmáis vivo.
- Son intermitente: Inspect all connections for looseness or corrosion. Check for any kinks or damage in the speaker wires.
- Un altofalante non funciona: Swap the non-working speaker with a known working one to determine if the issue is with the speaker or the wiring/ampcanle lifier.
If problems persist after attempting these steps, contact DS18 customer support or a certified car audio technician.
8. Garantía e soporte
The DS18 EXL-SQ4 speakers come with a limited one-year manufacturer defect warranty from the date of purchase. Please retain your proof of purchase for warranty claims.
For technical support, warranty inquiries, or further assistance, please visit the official DS18 websitio ou póñase en contacto co seu departamento de atención ao cliente.
Oficial de DS18 Websitio: www.ds18.com
9. Imaxes do produto
