Introdución
This manual provides essential information for the safe and efficient use of your Philips Lighting ER55LD3WR LED Exit Sign. Please read these instructions carefully before installation and operation, and retain them for future reference. This product is designed for commercial lighting applications, specifically as a lighted exit sign.
Información de seguridade
- Always disconnect power before installing or servicing the unit.
- Installation should be performed by a qualified electrician in accordance with national and local electrical codes.
- Non use este produto para outros fins que non sexan os previstos.
- Asegúrese de que todas as conexións estean seguras e debidamente illadas.
- Manter lonxe da auga e da humidade excesiva.
Contido do paquete
Comprobe que todos os compoñentes estean presentes antes de comezar a instalación:
- Philips Lighting ER55LD3WR LED Exit Sign unit
- Ferramentas de montaxe (parafusos, ancoraxes)
- Manual de instrucións (este documento)
Configuración e instalación
The Philips Lighting ER55LD3WR LED Exit Sign is designed for wall mounting. Ensure the mounting surface is suitable to support the weight of the unit.
- Prepare a zona de instalación: Disconnect power to the circuit where the exit sign will be installed.
- Montaxe:
- Identify the desired wall mounting location.
- Use the provided mounting hardware to securely attach the exit sign to the wall. Ensure the unit is level.
- Cableado:
- Connect the building's 120V AC power supply to the corresponding wires on the exit sign. Refer to the wiring diagram inside the unit's housing for specific connections.
- Asegurar a correcta posta a terra.
- Connect the internal battery (if not pre-connected). This is crucial for emergency operation.
- Asemblea final: Secure any covers or diffusers.
Figura 1: Fronte view of the Philips Lighting ER55LD3WR LED Exit Sign. This image shows the white housing with the red "EXIT" lettering illuminated, indicating its primary function as an emergency egress indicator.
Instrucións de funcionamento
Once installed and power is restored, the Philips Lighting ER55LD3WR LED Exit Sign will operate automatically.
- Funcionamento normal: When AC power is present, the "EXIT" sign will be illuminated by the internal LEDs. The green indicator light on the unit will be ON, signifying operating status.
- Operación de emerxencia: In the event of an AC power failure, the unit will automatically switch to battery backup, illuminating the "EXIT" sign for a specified duration (typically 90 minutes).
- Botón de proba: A test button is provided on the unit to verify emergency operation. Press and hold the "Push to Test" button to simulate an AC power failure. The sign should remain illuminated, and the green indicator light will blink, indicating testing. Release the button to return to normal operation.
Imaxe 2: Primeiro plano view of the test button and indicator lights on the Philips Lighting ER55LD3WR LED Exit Sign. The green indicator shows operating status (ON for ready, Blinking for testing). The red indicator shows service alerts such as battery, charger board, transformer, or LED strip faults.
Mantemento
Regular maintenance ensures the reliability and longevity of your LED Exit Sign.
- Proba mensual: Press the "Push to Test" button for at least 30 seconds to ensure the battery backup system is functioning. The sign should remain illuminated.
- Annual Test: Disconnect AC power to the unit for 90 minutes to verify the battery can sustain emergency illumination for the required duration.
- Limpeza: Limpe o exterior da unidade cun suave, damp pano. Non use produtos de limpeza ou disolventes abrasivos.
- Substitución da batería: The internal battery has a limited lifespan. If the unit fails to hold a charge or the red "Battery fault" indicator illuminates, the battery may need replacement. Contact qualified service personnel for battery replacement.
Resolución de problemas
Consulta a seguinte táboa para ver os problemas comúns e as súas solucións.
| Problema | Causa posible | Solución |
|---|---|---|
| Sign does not illuminate (AC power present) | No AC power; faulty wiring; LED strip fault | Check circuit breaker; verify wiring connections; contact service for LED replacement. |
| Sign does not illuminate during power outage (emergency mode) | Battery not connected; discharged battery; faulty battery; charger board fault | Ensure battery is connected; allow 24 hours for initial charge; replace battery; contact service for charger board repair. |
| Red Service Alert indicator is ON | Indicates battery, charger board, transformer, or LED strip fault (refer to unit label) | Identify specific fault from unit label; perform monthly/annual tests; contact qualified service personnel. |
| Green Operating Status indicator is OFF (AC power present) | No AC power; internal fault | Check AC power supply; contact qualified service personnel. |
Especificacións
| Característica | Detalle |
|---|---|
| Número de modelo | ER55LD3WR |
| Marca | Iluminación Philips |
| Tipo de fonte de luz | LED |
| Voltage | 120 voltios |
| Fonte de enerxía | Eléctrico con cable |
| Tipo de montaxe | Soporte de parede |
| Material | Metal |
| Cor | Branco |
| Dimensións do produto | 4.25 x 6.25 x 4.8 polgadas |
| Peso do elemento | 4.98 libras |
| UPC | 781370410117 |
Garantía e Soporte
For warranty information or technical support, please contact Philips Lighting customer service. Keep your purchase receipt as proof of purchase.
Fabricante: Iluminación Philips
Websitio: Visit the PHILIPS Store on Amazon
