Introdución
This manual provides comprehensive instructions for the safe and proper installation, operation, and maintenance of your Invision Ultra Slim Tilt Swivel TV Wall Bracket Mount (HDTV-E). Please read all instructions carefully before beginning installation to ensure correct assembly and to prevent damage or injury. Keep this manual for future reference.
Contido do paquete:
- Invision Ultra Slim Tilt Swivel TV Wall Bracket Mount
- Kit de ferraxes de montaxe (varios parafusos, ancoraxes, arandelas)
- High Speed HDMI Cable (1080p 1.4v)
- 6-inch Tri-axis Spirit Level
- Manual de instrucións
Figura 1: Invision Ultra Slim Tilt Swivel TV Wall Bracket Mount (HDTV-E) components, including the main mount assembly, VESA plate, and accessories like the spirit level and HDMI cable.
Información importante de seguridade
WARNING: Failure to read and follow these instructions can result in serious personal injury, property damage, or voiding of your warranty.
- Do not install this product on walls that are not structurally sound. Ensure the mounting surface can support the combined weight of the mount and your television.
- Always use a stud finder to locate wood studs or ensure you are mounting into solid concrete/brick.
- Do not exceed the maximum load capacity of 36.2kg (80lbs).
- Este produto está deseñado só para uso en interiores.
- Ensure all screws are securely tightened, but do not overtighten.
- Manteña os nenos e as mascotas afastados durante a instalación.
- Se tes algunha dúbida sobre calquera parte do proceso de instalación, consulta cun profesional cualificado.
Especificacións
| Característica | Detalle |
|---|---|
| Número de modelo | HDTV-E |
| Marca | Invision |
| Material | Aceiro de alta calidade |
| Cor | Negro |
| Compatibilidade do tamaño da pantalla | 24-55 polgadas |
| Compatibilidade VESA | 100x100mm to 400x400mm (Not suitable for 75x75mm VESA) |
| Capacidade de carga máxima | 36.2 kg (80 lb) |
| Wall Profile (Min-Max) | 55mm (2.2 inches) to 500mm (19.7 inches) |
| Tipo de movemento | Inclinación, xiro |
| Ángulo de inclinación máximo | 5 a 8 graos |
| Accesorios incluídos | High Speed HDMI Cable, Tri-axis Spirit Level |
Figura 2: Key specifications of the Invision HDTV-E mount, including load capacity (36.2kg), minimum wall profile (55mm), and maximum extension (500mm).
Configuración e instalación
1. Lista de verificación previa á instalación
- Verify VESA Compatibility: Check the back of your TV for four mounting holes. Measure the horizontal and vertical distance between these holes. This mount supports VESA patterns from 100x100mm to 400x400mm. Note: Not suitable for 75x75mm VESA.
- Tipo de parede: Determine if your wall is wood stud, solid concrete, or brick. Different mounting hardware is required.
- Ferramentas necesarias: Pencil, drill, stud finder (for wood studs), level (included), measuring tape, socket wrench, screwdriver.
- Control de peso: Ensure your TV's weight does not exceed 36.2kg (80lbs).
Figura 3: Guide to checking VESA compatibility. Measure the distance between mounting holes to determine your TV's VESA pattern. The image illustrates how to measure width and height for VESA standards.
2. Attaching the TV Brackets to Your Television
- Coloca con coidado o televisor boca abaixo sobre unha superficie suave e limpa para evitar danar a pantalla.
- Identify the correct screws (M4, M6, or M8) from the hardware kit that fit your TV's mounting holes. Use washers if necessary.
- Attach the two vertical TV brackets to the back of your television using the selected screws. Ensure they are securely fastened but do not overtighten. The brackets should be centered horizontally on the TV.
3. Mounting the Wall Plate to the Wall
- Determine Mounting Height: Decide on the desired height for the top of your TV. Mark this on the wall.
- Localizar os montantes (para paredes con montantes de madeira): Use a stud finder to locate the center of two adjacent wood studs. Mark these locations.
- Posición da placa de parede: Hold the wall plate against the wall at the desired height, aligning it with the marked stud centers. Use the included spirit level to ensure it is perfectly horizontal. Mark the drill holes.
- Perforar buratos piloto:
- For wood studs: Drill pilot holes using a 5.5mm (7/32 inch) drill bit to a depth of 60mm (2.36 inches).
- For solid concrete/brick: Drill pilot holes using a 10mm (3/8 inch) drill bit to a depth of 70mm (2.75 inches). Insert concrete anchors into the holes.
- Placa de parede segura: Attach the wall plate to the wall using the lag bolts and washers provided. Tighten all bolts firmly.
4. Colgar o televisor
- Con axuda, levante con coidado o televisor cos soportes instalados.
- Engancha os soportes do televisor na placa de parede. Asegúrate de que o televisor estea ben asentado na placa de parede.
- Engage the safety locking screws or mechanisms on the bottom of the TV brackets to prevent accidental dislodging.
Instrucións de funcionamento
The Invision HDTV-E mount offers flexible viewing options with its tilt and swivel capabilities.
Figura 4: The mount's design allows for extensive swivel and tilt adjustments, providing optimal viewángulos desde varias posicións nunha habitación.
Axuste do xiro
Gently grasp the sides of your television and carefully pull it away from the wall. You can then pivot the TV left or right to achieve your desired viewing angle. The mount allows for a wide range of swivel motion, up to 500mm (19.7 inches) extension from the wall.
Axuste da inclinación
To adjust the vertical tilt, gently push the top or bottom of the television forward or backward. The mount supports a tilt angle of 5 to 8 degrees. The lockable tilt mechanism ensures the TV stays at your chosen angle.
Xestión de cables
The mount features integrated cable management covers on the arms. Route your cables (including the included HDMI cable) through these covers to keep them organized and out of sight, ensuring a clean installation.
Figura 5: Detallado view of the mount's cable management system and the lockable tilt mechanism, designed for a tidy and secure setup.
Mantemento
- Inspección periódica: Periodically check all mounting screws and bolts to ensure they remain tight. Over time, vibrations or adjustments can cause them to loosen slightly.
- Limpeza: Limpa a montura cun pano suave e seco. Evita produtos de limpeza abrasivos ou solventes que poidan danar o acabado.
- Lubricación: As pezas móbiles do soporte están deseñadas para un funcionamento suave e, polo xeral, non requiren lubricación. Se observas algunha rixidez, ponte en contacto co servizo de atención ao cliente.
- Límite de peso: Never exceed the maximum weight capacity of 36.2kg (80lbs).
Resolución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| O televisor non está nivelado despois da instalación. | Wall plate was not installed level. | Remove TV, loosen wall plate screws, adjust with spirit level, re-tighten. |
| A montaxe parece inestable. | Screws are loose; wall not suitable; weight exceeded. | Check all screws for tightness. Verify wall type and TV weight. If issues persist, consult a professional. |
| Dificultade para axustar a inclinación/xiro. | Mechanism might be stiff or overtightened. | Ensure no cables are obstructing movement. Check for any adjustment knobs that might be too tight. Do not force movement. |
| Faltan pezas. | Erro de empaquetado. | Contact Invision customer support immediately for replacement parts. |
Información da garantía
The Invision Ultra Slim Tilt Swivel TV Wall Bracket Mount (HDTV-E) comes with a 25 anos de garantía do produto. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications.
For warranty claims or further details, please contact Invision customer support.
Atención ao cliente
If you have any questions, require assistance with installation, or need to report a missing/damaged part, please contact Invision Technology (UK) Ltd. customer support.
Fabricante: Invision Technology (UK) Ltd
Número de identificación comercial global (GTIN): 05060264551392
Please refer to the product packaging or the official Invision websitio para obter a información de contacto máis actualizada.
Figura 6: Product packaging displaying manufacturer information and contact details for Invision Technology (UK) Ltd.
