1. Introdución
The Clearaudio Concept MM Turntable is an exceptional audio component designed to deliver high-fidelity sound reproduction from your vinyl records. Featuring an exclusive magnetic bearing system and a pre-mounted Classic MM cartridge, this turntable offers a refined and dynamic listening experience. Its robust construction, utilizing high-quality alloy and engineered wood, ensures stable and precise playback.
As características principais inclúen:
- Pre-mounted Classic MM (Moving Magnet) cartridge for immediate use.
- Exclusive magnetic bearing for ultra-low friction and smooth platter rotation.
- Belt-drive motor for stable speed and reduced vibrations.
- Integrated tonearm (CF tonearm) designed for optimal tracking.
2. Que hai na caixa
Upon unpacking, please ensure all components are present and in good condition:
- Clearaudio Concept MM Turntable unit
- Pre-mounted Classic MM cartridge/stylus
- Funda antipolvo
- Power supply unit (with cable)
- Correa de transmisión
- Prato
Se falta algún elemento ou está danado, póñase en contacto co seu distribuidor inmediatamente.
3. Guía de configuración
Careful setup is crucial for optimal performance of your Clearaudio Concept MM Turntable.
3.1 Colocación
Choose a stable, level surface away from direct sunlight, heat sources, and strong vibrations. Ensure adequate ventilation around the unit.
3.2 Desembalaxe e montaxe
- Gently remove the turntable from its packaging.
- Place the main plinth on your chosen surface.
- Carefully place the platter onto the spindle. The magnetic bearing system will guide it into place.
- Install the drive belt around the motor pulley and the inner rim of the platter.
- Coloque a tapa antipolvo sobre o tocadiscos.
3.3 Tonearm and Cartridge Adjustment
Your Clearaudio Concept MM Turntable comes with a pre-mounted Classic MM cartridge. While factory-set, fine-tuning may be required for optimal sound and stylus longevity.
- Forza de seguimento: The recommended tracking force for the Classic MM cartridge is typically around 2.0 grams. Due to the magnetic suspension, it is recommended to set the tracking force at the height of the platter for accurate readings. Use a digital stylus force gauge for precision.
- Anti-patinaxe: The anti-skating adjustment is located underneath the base of the platter. This adjustment counteracts the inward force on the tonearm, ensuring even wear on the stylus and proper channel balance. Adjust it carefully while playing a record or using a test record.
- VTA (Vertical Tracking Angle) / Azimuth: These are typically factory-set for the pre-mounted cartridge. Refer to advanced setup guides if further adjustment is desired.
Figura 3.1: Máisview of the Clearaudio Concept MM Turntable, showing the platter, tonearm, and speed selection knob.
3.4 Conectividade
Connect the turntable to your audio system:
- Connect the RCA audio cables from the turntable's output to the "Phono MM" input on your amplifier or AV receiver. If your amplifier does not have a dedicated "Phono MM" input, you will need an external phono preampmáis vivo.
- Conecta o cable de terra do tocadiscos ao terminal de terra do teu amplifier ou phono preamplificador para minimizar o zumbido.
3.5 Conexión de alimentación
Connect the power supply unit to the turntable's power input, then plug it into a suitable wall outlet. Ensure the power switch is in the OFF position before connecting.
4. Instrucións de funcionamento
4.1 Acendido/Apagado
Locate the power switch, typically integrated with the speed selection knob. Turn the knob to the desired speed (33, 45, or 78 RPM) to power on the turntable. Turn it to the 'Off' position to power off.
Selección de 4.2 velocidades
The Clearaudio Concept MM Turntable supports multiple playback speeds:
- 33 ⅕ RPM: For standard LPs (Long Play records).
- 45 RPM: For singles and some audiophile pressings.
- 78 RPM: For shellac records (requires a dedicated 78 RPM stylus, not included).
Select the appropriate speed using the control knob on the plinth.
4.3 Reproducindo un disco
- Coloca un disco no prato.
- Select the correct playback speed.
- Levante o brazo usando a palanca de sinalización.
- Carefully position the tonearm over the desired starting groove of the record.
- Gently lower the cueing lever to allow the stylus to descend onto the record.
- Axusta o volume do teu ampmáis vivo.
4.4 Deter a reprodución
- Levante o brazo usando a palanca de sinalización.
- Devolve o brazo ao seu repouso.
- Lower the cueing lever.
- Turn the speed selection knob to the 'Off' position to power down the turntable.
- Replace the dust cover to protect the turntable from dust.
5. Mantemento
Regular maintenance will ensure the longevity and optimal performance of your turntable.
- Funda antipolvo: Always use the dust cover when the turntable is not in use to prevent dust accumulation on the platter, tonearm, and stylus.
- Cleaning the Plinth and Platter: Use a soft, dry, lint-free cloth to wipe down the plinth and platter. Avoid abrasive cleaners or solvents.
- Limpeza do punteiro: Gently clean the stylus regularly using a dedicated stylus brush or cleaning fluid. Always brush from back to front.
- Correa de transmisión: Periodically inspect the drive belt for wear or stretching. Replace it if it appears loose or cracked, as this can affect speed stability.
- Substitución do cartucho: The stylus (needle) of your cartridge will wear over time. Consult a professional or refer to the cartridge manufacturer's guidelines for replacement intervals.
6 Solución de problemas
Aquí tes algúns problemas comúns e as súas posibles solucións:
| Problema | Causa posible | Solución |
|---|---|---|
| Sen son ou son moi baixo | Entrada incorrecta seleccionada en amplifier; cables loose; no phono preamplifier (if needed); ampvolume do lifter demasiado baixo. | Ensure "Phono MM" input is selected. Check all cable connections. Use a phono preamplifier if your amplifier lacks a dedicated phono input. Increase ampvolume lifier. |
| Zumbido ou zumbido | Ground wire not connected; poor cable shielding; proximity to other electronics. | Ensure ground wire is securely connected. Use high-quality shielded RCA cables. Move turntable away from other electronic devices. |
| Distorted sound or skipping | Incorrect tracking force; incorrect anti-skating; dirty stylus; damaged record; turntable not level. | Re-adjust tracking force (ensure measurement at platter height). Adjust anti-skating. Clean stylus. Inspect record for damage. Ensure turntable is perfectly level. |
| Velocidade de reprodución incorrecta | Wrong speed selected; worn drive belt. | Verify the correct speed (33, 45, or 78 RPM) is selected. Inspect and replace the drive belt if necessary. |
If the problem persists, please contact your authorized Clearaudio dealer or support.
7. Especificacións
| Marca | Clearaudio |
| Nome do modelo | Concept TP053 |
| Número de modelo | CONCEPT MM TP053 |
| Tecnoloxía de conectividade | AUX |
| Dispositivos compatibles | Amplifier, AV Receiver, Active Speakers, various audio components |
| Característica especial | MC System (Note: Product is MM, but system supports MC cartridges) |
| Compoñentes incluídos | Cartridge/stylus, Dust cover |
| Tipo de potencia | Con cable |
| Material | High-quality alloy or engineered wood |
| Cor | Negro |
| Tipo de motor | Motor de transmisión por correa |
8. Garantía e soporte
For warranty information, please refer to the documentation provided with your purchase or contact your authorized Clearaudio dealer. Clearaudio products are known for their quality and durability, and support is available through their official channels.
For technical assistance or service inquiries, please contact your local Clearaudio distributor or visit the official Clearaudio websitio para os detalles de contacto.
