1. Introdución
This manual provides essential information for the safe and efficient operation of your Truper BOS-1LM 1 HP Submersible Bullet Pump. This pump is designed for extracting clean water from wells, springs, or for irrigation systems. It features a durable stainless steel body, a copper-wound motor for extended life, and an integrated electrical control unit.
2. Instrucións de seguridade
Read all safety warnings and instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Seguridade eléctrica: Ensure the power supply matches the pump's specifications. Always disconnect power before performing any maintenance or installation. Do not operate the pump with damaged cables or plugs.
- Calidade da auga: This pump is designed for clean water only. Do not use it for flammable liquids, corrosive chemicals, or water containing large abrasive particles.
- Inmersión: The pump must be fully submerged during operation to prevent overheating. Ensure adequate water level.
- Instalación: Securely install the pump using appropriate suspension methods. Ensure all connections are watertight.
- Nenos e animais: Manteña os nenos e as mascotas lonxe da bomba e da súa zona de funcionamento.
- Protección térmica: The pump is equipped with a thermal protector to prevent motor damage from overheating or blockage. If the pump stops unexpectedly, allow it to cool down before restarting and investigate the cause.
3. Compoñentes do produto
Familiarize yourself with the main components of your Truper BOS-1LM pump:
Imaxe 3.1: Labeled diagram of the Truper BOS-1LM pump and its control unit. Key components include: Suspension Eyelets (Ojos de suspensión), 2.5 mm Suction Holes (Orificios de succión de 2.5 mm), Stainless Steel Casing (Carcasa de acero inoxidable), 38 mm Discharge Connection (Conexión de descarga de 38 mm), Power Control Box (Caja de control de encendido), On/Off Switch (Interruptor encendido/apagado), and Overload Protection Switch (Interruptor de protección de sobrecarga).
4. Configuración
- Desembalaxe: Retire con coidado a bomba e todos os accesorios da embalaxe. Inspeccione se hai algún dano.
- Suspensión: Attach a strong rope or cable to the suspension eyelets at the top of the pump. This will be used to lower and retrieve the pump. Do not use the power cable for suspension.
- Conexión de descarga: Connect a 38 mm (1.5 inch) discharge hose or pipe to the pump's discharge connection. Ensure a secure and leak-free connection.
- Colocación da unidade de control: Mount the electrical control unit in a dry, accessible location, away from direct water exposure.
- Conexión eléctrica: Connect the pump's power cable to the control unit. Then, connect the control unit to a suitable grounded power outlet. Ensure the power supply matches the pump's voltage requisitos de frecuencia.
- Baixando a bomba: Slowly lower the pump into the water source using the suspension rope. Ensure the pump is fully submerged and rests vertically, not touching the bottom or sides of the well/tank.
Imaxe 4.1: The Truper BOS-1LM pump measures 71 cm in height and 9 cm in diameter, indicating its compact 'bullet' design suitable for narrow spaces.
5. Instrucións de funcionamento
Once the pump is properly installed and submerged, follow these steps for operation:
- Encendido: Ensure the overload protection switch on the control unit is in the 'ON' position. Press the 'ON' button on the control unit to start the pump.
- Monitor de fluxo: Observe the water flow from the discharge. The pump should begin pumping water immediately.
- Apagado: To stop the pump, press the 'OFF' button on the control unit.
- Curva de rendemento: Refer to the performance curve to understand the pump's flow rate (L/min) at different discharge heights (m). This helps in optimizing usage for your specific needs.
Imaxe 5.1: This image illustrates the pump's operation, showing it submerged in a well, pumping water with increased pressure. It also includes a performance curve graph, indicating the recommended use area and the relationship between pumping height (Altura in meters) and flow rate (Flujo in L/min) for the BOS-1LM model.
6. Mantemento
Un mantemento regular garante a lonxevidade e o rendemento óptimo da súa bomba.
- Limpeza de filtros: The pump has a filtering grid for particles up to 1.5 mm. Periodically inspect and clean the suction holes and filter to prevent blockages and maintain efficient flow.
- Inspección: Regularly inspect the pump body, power cable, and discharge hose for any signs of wear, damage, or corrosion. Replace damaged components immediately.
- Almacenamento: If the pump will not be used for an extended period, clean it thoroughly, drain all water, and store it in a dry, frost-free location.
- Protector térmico: The thermal protector automatically shuts off the motor if it overheats. If this occurs, disconnect power, allow the pump to cool, and check for blockages or low water levels before restarting.
7 Solución de problemas
Antes de contactar co servizo de asistencia, volva aview estes problemas e solucións comúns:
| Problema | Causa posible | Solución |
|---|---|---|
| A bomba non arranca | No power; Thermal protector tripped; Motor blockage | Check power supply and connections; Allow pump to cool and reset; Inspect for and clear any blockages. |
| Caudal de auga baixo ou nulo | Low water level; Clogged filter/suction; Kinked or blocked discharge hose | Ensure pump is fully submerged; Clean suction holes and filter; Check and clear discharge hose. |
| A bomba funciona pero non hai auga | Air lock; Pump not fully submerged | Raise and lower pump slightly to release air; Ensure full submersion. |
| Vibración / ruído excesivos | Pump not properly suspended; Debris in impeller | Adjust suspension; Disconnect power and inspect impeller for debris. |
8. Especificacións
Technical specifications for the Truper BOS-1LM pump:
| Característica | Especificación |
|---|---|
| Número de modelo | BOS-1LM |
| Poder | 1 HP (750 W) |
| Material | Stainless Steel, Copper |
| Fonte de enerxía | Cable eléctrico |
| Caudal máximo | 6000 Liters per hour (9600 L/h on box, using 6000 L/h from specs) |
| Max Height (Head) | 40 metros |
| Particle Filter Size | Ata 1.5 mm |
| Dimensións do produto (L x W x H) | 9 x 9 x 71 cm |
| Peso | 13.72 kg |
| Conexión de descarga | 38 mm |
9. Garantía e soporte
For warranty information or technical support, please refer to the documentation included with your purchase or visit the official TRUPER websitio. Garde o recibo da compra como proba de compra para calquera reclamación de garantía.
TRUPER Contact Information:
- Websitio: www.truper.com (Please check for local contact details)
