Introdución
This manual provides detailed instructions for the safe and efficient operation of your Pyle PDA35BT Mini Bluetooth Power Digital Class D Amplifier. This compact 2-channel stereo amplifier features Bluetooth connectivity, two auxiliary inputs, and a headphone output, making it suitable for various audio setups. Please read this manual thoroughly before use and retain it for future reference.
Instrucións de seguridade
- Asegúrese de que a fonte de alimentación voltage cumpre cos requisitos especificados na unidade.
- Non expoña a unidade á choiva, á humidade ou a temperaturas extremas.
- Evite colocar a unidade preto de fontes de calor ou baixo a luz solar directa.
- Non abra o ampvidador casing. Encomende todo o mantemento a persoal cualificado.
- Manteña a unidade lonxe dos nenos.
- Desconecte o adaptador de corrente da toma de corrente se non vai usar a unidade durante un período prolongado.
- Asegure unha ventilación adecuada ao redor da unidade para evitar o sobreenriquecido.
Contido do paquete
Comprobe que todos os elementos estean presentes ao desembalar:
- Pyle PDA35BT Mini Bluetooth Power Ampmáis vivo
- Wall Power Adapter (24V DC, 4.5A)
- Antena Bluetooth
- RCA (L/R) Audio Cable
- Banana Plugs (for speaker connection)
- 3.5mm (AUX) Input Cable
Figure 1: Pyle PDA35BT AmpLifter e accesorios
This image displays the compact Pyle PDA35BT amplifier alongside its essential accessories, including the power adapter, detachable Bluetooth antenna, RCA audio cables, banana plugs for speaker wire termination, and a 3.5mm AUX input cable, illustrating a complete package for immediate setup.
Produto rematadoview
Panel frontal
Figure 2: Front and Rear Panel Diagram
This diagram provides a clear, numbered illustration of both the front and rear panels of the Pyle PDA35BT amplifier, highlighting all input, output, and control features for easy identification and setup.
- Indicador de potencia: Acende cando a unidade está acendida.
- Indicador BT: Illuminates when Bluetooth is active and flashes during pairing.
- Selector de entrada: Toggle switch to select between Bluetooth (BT) and Line (AUX) input.
- Headphone Jack (1/4''): Connect headphones for private listening. Automatically mutes speaker output.
- Volume/ON/OFF Knob: Rotary control for adjusting master volume and powering the unit on/off.
- AUX-IN (3.5mm): Connect external audio devices via a 3.5mm cable.
Panel traseiro
- BT ANT (Bluetooth Antenna): Connect the included Bluetooth antenna for optimal wireless range.
- R OUT / L OUT (Speaker Outputs): Connect passive speakers using banana plugs. Supports 2-channel stereo output (50W x 2 @ 8 Ohm).
- LINE INPUT (RCA L/R): Connect external audio sources using RCA cables.
- DC 24V (Power Input): Conecte o adaptador de corrente continua de 24 V incluído.
Figure 3: Pyle PDA35BT Front and Rear Views
This image provides a clear visual of the Pyle PDA35BT amplifier from both the front and rear, detailing the layout of all control knobs, input jacks, output terminals, and the Bluetooth antenna connection point.
Configuración
- Conectar altofalantes:
Conecta os teus altofalantes pasivos ao R OUT e L FÓRA terminals on the rear panel using banana plugs. Ensure correct polarity (red to red, black to black) for optimal sound quality. This amplifier is designed for bookshelf or small outdoor speakers, not large 10-12 inch speakers or subwoofers.
- Conectar a antena Bluetooth:
Screw the included Bluetooth antenna onto the BT ANT connector on the rear panel.
- Connect Audio Source (Optional - Wired):
- For RCA input: Connect your audio device (e.g., CD player, TV) to the LINE INPUT (RCA L/R) on the rear panel using RCA cables.
- For 3.5mm AUX input: Connect your audio device (e.g., smartphone, tablet) to the AUX-IN (3.5 mm) conector jack do panel frontal mediante un cable de audio de 3.5 mm.
- Conectar enerxía:
Connect the included 24V DC wall power adapter to the DC 24 V input on the rear panel, then plug the adapter into a suitable wall outlet.
Instrucións de funcionamento
- Encendido/apagado:
Xire o Volume/ON/OFF Knob clockwise to turn the unit on. The Indicador de potencia (1) will illuminate. Rotate counter-clockwise until it clicks to turn off.
- Emparellamento Bluetooth:
- Asegurar o Selector de entrada (3) is set to BT. O Indicador BT (2) will flash, indicating it's in pairing mode.
- On your device (smartphone, tablet, etc.), enable Bluetooth and search for "Pyle Audio" or "PDA35BT".
- Seleccione o amplifier from the list to pair. Once connected, the Indicador BT (2) will glow solid blue.
- The Bluetooth version is 4.0, offering a range of approximately 30 feet. If no device connects within a certain time, the amplifier may time out. Turn the unit off and on again to re-enter pairing mode.
- Using AUX Input:
- For 3.5mm AUX-IN (front panel): Connect your device and set the Selector de entrada (3) a LIÑA.
- For RCA LINE INPUT (rear panel): Connect your device and set the Selector de entrada (3) a LIÑA.
- Saída de auriculares:
Conecta os teus auriculares ao Headphone Jack (1/4'') (4) on the front panel. The speaker outputs will automatically mute when headphones are connected.
- Axuste do volume:
Usa o Volume/ON/OFF Knob (5) to adjust the overall output volume.
Resolución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| Sen poder | Power adapter not connected or faulty; unit not turned on. | Ensure power adapter is securely connected and plugged into a working outlet. Rotate the Volume/ON/OFF knob clockwise to turn on. |
| Non hai son dos altofalantes | Speakers not connected correctly; input selector incorrect; volume too low; headphones connected. | Check speaker wire connections and polarity. Verify Input Selector is set to the correct source. Increase volume. Disconnect headphones if speakers are desired. |
| Bluetooth non se sincroniza | A unidade non está en modo de emparellamento; dispositivo demasiado lonxe; interferencias. | Ensure Input Selector is set to BT and BT Indicator is flashing. Move device closer to the amplifier (within 30ft). Turn amplifier off and on again to reset Bluetooth. |
| Son distorsionado | Volume too high; faulty cables; speaker impedance mismatch. | Reduce volume. Check and replace audio cables if necessary. Ensure speakers are compatible (8 Ohm recommended). |
Especificacións
| Característica | Especificación |
|---|---|
| Potencia de saída | 100 Watts (RMS: 50 Watt x 2 @ 8 Ohm) |
| Número de canles | 2 |
| Versión Bluetooth | 4.0 |
| Alcance Bluetooth | Aprox. 30 pés |
| Entradas | 3.5mm AUX-IN (Front), RCA (L/R) Line Input (Rear) |
| Saídas | Banana Plugs (Speaker), 1/4'' Headphone Jack |
| Vol. Subministración máximatage | 24 voltios (DC) |
| Dimensións do artigo (L x W x H) | 4.9'' x 3.6'' x 1.9'' |
| Peso do elemento | 1.06 libras |
Mantemento
- Limpa a unidade cun pano suave e seco. Non empregues produtos de limpeza líquidos nin aerosois.
- Keep the unit free from dust and debris to ensure proper ventilation.
- Almacenar o ampo lificador nun lugar fresco e seco cando non estea en uso.
Garantía e Soporte
For warranty information or technical support, please refer to the documentation included with your purchase or visit the official Pyle websitio. Garda o comprobante de compra para calquera reclamación de garantía.
