Weiser Augusta Handle Set Instruction Manual

Introdución

The Weiser Augusta Handle Set is a stylishly designed exterior door lock system from the Welcome Home series, engineered to provide maximum-security protection for your home. This handleset features a satin nickel finish, offering a modern aesthetic. It can be securely locked or unlocked using a key from the outside, or with a key or turnpiece from the inside. This manual provides comprehensive instructions for installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your handle set.

Figure 1: Weiser Augusta Handle Set components, including the exterior handleset with deadbolt and the interior lever, all in a satin nickel finish.

Configuración e instalación

This section outlines the steps required to properly install your Weiser Augusta Handle Set. Ensure you have all necessary tools before beginning the installation process.

Ferramentas necesarias:

• Destornillador de cabeza Phillips
• Cinta métrica
• Lapis
• Drill (if new door preparation is needed)

Pasos de instalación:

1. Prepara a porta: Ensure your door has a 2-1/8 inch cross bore for the handleset. If installing on a new door, follow standard door preparation guidelines for bore holes and backset.
2. Install the Latch and Deadbolt: Insert the latch and deadbolt mechanisms into the door edge. Secure them with the provided screws. Ensure the latch bolt is facing the correct direction for your door swing.
3. Assemble Exterior Handleset: Place the exterior handleset through the bore holes, aligning it with the latch and deadbolt.
4. Assemble Interior Components: Attach the interior mounting plate and lever assembly. Secure all components with the long through-bolts and screws provided.
5. Proba de funcionamento: Before closing the door, test the deadbolt and latch operation with the key from the outside and the turnpiece/key from the inside. Ensure smooth engagement and retraction.
6. Instalar as placas de peche: Install the strike plates on the door frame, aligning them with the latch and deadbolt. Ensure a secure and flush fit.

Instrucións de funcionamento

The Weiser Augusta Handle Set is designed for ease of use and enhanced security.

Bloqueo e desbloqueo:

• Desde o exterior: Insert the key into the deadbolt cylinder and turn to lock or unlock. The handle below the deadbolt is a pull handle and does not require a key for entry once the deadbolt is unlocked.
• Desde o interior: Use the turnpiece on the deadbolt to lock or unlock. The interior lever operates the latch for entry/exit.

Tecnoloxía de rechaveado SmartKey:

This handle set features SmartKey re-key technology, allowing you to re-key the lock yourself in seconds. This is useful if you want to match your lock to an existing key or if you lose a key and want to change the lock's keying.

1. Inserir clave actual: Insert your currently working key fully into the SmartKey cylinder.
2. Chave en man: Rotate the key 90 degrees clockwise.
3. Inserir ferramenta SmartKey: While the key is turned, insert the SmartKey tool firmly and fully into the small hole on the cylinder face.
4. Eliminar a chave actual: Retire a chave actual mantendo a ferramenta SmartKey inserida.
5. Inserir nova clave: Insert your new key fully into the cylinder.
6. Eliminar a ferramenta SmartKey: Retire a ferramenta SmartKey.
7. Probar nova clave: Rotate the new key 180 degrees counter-clockwise to the original position, then remove it. Test the new key to ensure it operates the lock smoothly.

For a visual guide, please refer to the official Weiser SmartKey re-keying video tutorials available on the Weiser website or authorized channels. (Note: No video provided in JSON, so this is a general suggestion).

Mantemento

Proper maintenance will ensure the longevity and smooth operation of your Weiser Augusta Handle Set.

• Limpeza: Limpar as superficies exteriores cun pano suave eamp pano. Evite produtos de limpeza abrasivos, solventes ou produtos químicos agresivos, xa que poden danar o acabado de níquel satinado.
• Lubricación: Periodically apply a silicone-based lubricant (do not use oil-based lubricants) to the internal mechanisms of the lock and deadbolt to ensure smooth operation. Apply sparingly into the keyway and latch bolt.
• Parafusos de apriete: Over time, screws may loosen. Periodically check and tighten all mounting screws to ensure the handleset remains securely fastened to the door. Do not overtighten.

Resolución de problemas

This section addresses common issues you might encounter with your Weiser Augusta Handle Set.

If you continue to experience issues after attempting these solutions, please contact Weiser customer support.

Especificacións

Garantía e Soporte

Weiser stands behind the quality of its products. Your Augusta Handle Set comes with a comprehensive warranty.

Información da garantía:

Este produto está cuberto por a Garantía limitada de por vida. This warranty covers defects in material and workmanship for the lifetime of the original residential user. For full details regarding warranty coverage, limitations, and claims procedures, please refer to the official Weiser websitio ou póñase en contacto co servizo de atención ao cliente.

Atención ao cliente:

For technical assistance, warranty claims, or general inquiries, please contact Weiser customer support through their official channels:

• Websitio: Visita o sitio web oficial de Weiser websitio para preguntas frecuentes, rexistro de produtos e formularios de contacto. www.weiserlock.com
• Teléfono: Refer to the Weiser websitio web con números de teléfono de atención ao cliente rexionais.

When contacting support, please have your product model number (GLA9471 A/A15 SMT VS) and purchase information readily available.