Manual de instrucións do motor da porta de garaxe Schellenberg Smart DRIVE 10

1. Introdución

This manual provides detailed instructions for the installation, operation, and maintenance of your Schellenberg Smart DRIVE 10 Garage Door Motor. Please read this manual thoroughly before beginning installation or operation to ensure safe and efficient use of the product.

Image 1.1: The Schellenberg Smart DRIVE 10 Garage Door Motor, including the main drive unit, track, and remote controls.

2. Información de seguridade

Always observe the following safety precautions to prevent injury or damage to property.

• Ensure the garage door is balanced and in good working condition before installing the motor.
• Manteña os nenos e as mascotas lonxe da zona da porta da garaxe, especialmente durante o funcionamento.
• Do not allow children to operate the garage door opener or play with remote controls.
• Install the wall control button out of reach of children and away from moving parts of the door.
• The electronic obstacle detection system is designed to protect people and objects. However, always ensure the path of the garage door is clear.
• En caso de poder outage, use the emergency release to manually operate the door.
• Only qualified personnel should perform electrical connections. Disconnect power before any maintenance or repair.

3. Contido do paquete

Comprobe que todos os compoñentes estean presentes no paquete antes de comezar a instalación.

Image 3.1: Contents of the Schellenberg Smart DRIVE 10 package.

• Schellenberg Smart DRIVE 10 Motor Unit
• Drive Rail with pre-assembled chain
• 2 x Handheld Transmitters (Remote Controls)
• Mounting Hardware (brackets, screws, bolts)
• Emergency Release (for internal use)
• Manual de instrucións

4. Especificacións técnicas

Key technical data for the Schellenberg Smart DRIVE 10 Garage Door Motor:

Image 4.1: Dimensions of the Smart DRIVE 10 motor and rail assembly.

5. Instalación

The Schellenberg Smart DRIVE 10 is designed for quick and easy installation, with up to 90% of the unit pre-assembled. It is suitable for both swing doors and sectional doors.

5.1 Comprobacións previas á instalación

• Ensure your garage door operates smoothly and is properly balanced.
• Verify that the required clearances are met: a minimum of 35mm distance from the ceiling.
• The installation area must be dry and protected from splashing water.

5.2 Mounting the Drive Unit and Rail

1. Assemble the drive rail sections. The continuous drive chain is pre-assembled on one part of the rail and needs to be extended onto the other sections.
2. Attach the motor head to the assembled drive rail.
3. Mount the entire assembly to the ceiling of your garage, ensuring it is centered with the garage door. Secure it firmly using the provided mounting hardware. It is recommended to have assistance due to the weight and length of the unit.
4. Connect the door arm to the garage door and the trolley on the drive rail.

Imaxe 5.1: Ex.ample of the Smart DRIVE 10 motor installed above a garage door.

5.3 Conexión eléctrica

• Connect the motor to a standard 220-240V AC power outlet using the provided power supply.
• Optional external switching elements (e.g., wall buttons) and light barriers can be connected to the designated terminals. Refer to the wiring diagram in the full manual for specific connections.

Image 5.2: Wiring terminal for optional external connections.

5.4 Programming End Stops

After installation, program the opening and closing end stops according to the detailed instructions in the complete manual. This ensures the door opens and closes to the correct positions.

6. Funcionamento

6.1 Uso do mando a distancia

The garage door motor is operated using the included handheld transmitters.

Image 6.1: The Smart DRIVE 10 motor and its remote controls.

• Press a button on the remote control to open or close the garage door.
• The motor features a soft start and soft stop function, which gently accelerates and decelerates the door, reducing wear and tear.

6.2 Características de seguridade

• Electronic Obstacle Detection: If the door encounters an obstacle during closing, it will automatically reverse to prevent damage or injury.
• Liberación de emerxencia: In case of a power failure, the emergency release allows you to manually open or close the garage door from the inside.
• Protección térmica: The motor is equipped with thermal protection to prevent overheating.
• Electronic Road Sensor (Hall Sensor): Ensures precise positioning and reliable operation.

6.3 Integrated LED Lighting

The motor unit includes bright, energy-saving LED lighting that illuminates the garage when the door is operated. The lighting features an automatic shutdown function.

Image 6.2: Installed motor with LED lighting activated.

7. Mantemento

The Schellenberg Smart DRIVE 10 Garage Door Motor is designed for low maintenance.

• Cadea de transmisión: The continuous drive chain is pre-greased and designed for excellent window display and high service life, requiring minimal maintenance.
• Inspección periódica: Periodically check the garage door and motor for any signs of wear, damage, or loose connections.
• Limpeza: Keep the motor unit and track free from dust and debris. Use a soft, dry cloth for cleaning. Do not use abrasive cleaners or solvents.
• Balance da porta: Ensure the garage door remains properly balanced. An unbalanced door can put undue strain on the motor.

8 Solución de problemas

This section addresses common issues you might encounter with your garage door motor.

9. Garantía e soporte

For warranty information and customer support, please refer to the documentation included with your product or visit the official Schellenberg websitio. Garda o comprobante de compra para reclamacións de garantía.

Fabricante: Schellenberg
Número de modelo: 60910
Data de primeira dispoñibilidade: 17 de setembro de 2015