IKEA BlaviK LED Wall Lamp con manual de usuario de espello

1. Introdución

This manual provides essential information for the safe and efficient use of your IKEA BlaviK LED wall lamp with mirror. Please read these instructions carefully before installation and use, and retain them for future reference.

The IKEA BlaviK is a battery-operated LED wall lamp featuring an integrated magnifying mirror, designed for use in humid environments such as bathrooms. It offers adjustable lighting and an automatic shut-off function for energy saving.

2. Información de seguridade

• Seguridade da batería: Always use the correct type and size of batteries (3 x HR6/AA). Ensure batteries are inserted with correct polarity (+ and -). Do not mix old and new batteries, or different types of batteries. Remove exhausted batteries promptly. Dispose of batteries according to local regulations.
• Ambiente: This product is tested and approved for use in humid environments (IP44 rated), such as bathrooms. However, avoid direct water spray onto the lamp.
• Fonte de luz LED: The LED light sources in this product are non-replaceable. Do not attempt to open or modify the lamp.
• Montaxe: Ensure the wall surface is suitable for mounting and can support the weight of the lamp. Use appropriate screws and wall plugs for your wall type (screws are not included).

3. Contido do paquete

Verifique que estean presentes todos os compoñentes antes de continuar coa instalación:

• IKEA BlaviK LED Wall Lamp unit with integrated mirror
• Manual de instrucións (este documento)

Nota: Wall mounting screws and batteries (3 x HR6/AA) are not included and must be purchased separately. IKEA recommends LADDA rechargeable batteries.

4. Configuración e instalación

4.1. Inserción de batería

1. Locate the battery compartment on the lamp unidade.
2. Abra a tapa do compartimento da batería.
3. Insert 3 x HR6/AA batteries, ensuring correct polarity (+ and -) as indicated inside the compartment.
4. Pecha a tapa do compartimento da batería de forma segura.

4.2. Montaxe na parede

1. Choose a suitable location on the wall, ensuring it is clean and dry.
2. Mark the desired mounting points on the wall.
3. Drill holes if necessary and insert appropriate wall plugs (not included).
4. Asegure o lamp to the wall using suitable screws (not included). Ensure the lamp is firmly attached and stable.

This image displays the IKEA BlaviK LED wall lamp, highlighting its compact design, white casing, and the flexible arm that allows for light direction adjustment. The integrated mirror is visible on the lamp's face.

5. Instrucións de funcionamento

• Encendido/apagado: O lamp can be switched on and off manually using the integrated switch.
• Apagado automático: For energy saving, the lamp features a 15-minute automatic shut-off function.
• Axuste de luz: The flexible arm allows you to adjust the direction of the light as needed, providing targeted illumination.
• Espello de aumento: Utilize the integrated magnifying mirror for tasks such as shaving or applying makeup.

6. Mantemento

To ensure the longevity and optimal performance of your IKEA BlaviK lamp, follow these cleaning instructions:

• Limpe o lamp superficie con adamp pano.
• For more thorough cleaning, use a mild detergent on the damp pano.
• After cleaning, dry the lamp ben cun pano limpo e seco.
• Do not use abrasive cleaners or solvents, as these can damage the product's finish.

7 Solución de problemas

• Lamp non se ilumina:
  • Comprobe se as pilas están inseridas correctamente coa polaridade correcta.
  • Ensure the batteries are not exhausted; replace or recharge them if necessary.
  • Verify the manual switch is in the 'ON' position.
• A luz é tenue:
  • Pode que as baterías estean baixas. Substitúeas ou recárgaas.
• O apagado automático non funciona:
  • Asegurar o lamp is not being manually overridden.
  • Check battery levels, as low batteries might affect timer functions.

8. Especificacións

9. Garantía e soporte

For information regarding warranty, returns, or technical support, please contact your retailer or the manufacturer directly. Keep your proof of purchase for any warranty claims.