Cree Lighting Connected LED Smart Bulb User Manual

Introdución

The Cree Connected LED bulb is designed to provide an easy-to-use and cost-effective solution for customizing lighting in your home. This smart bulb can be controlled from anywhere, offering convenience and flexibility. It integrates with compatible home automation systems, allowing you to manage your lighting settings via an app on your iOS or Android device.

The Cree Connected LED bulb offers convenient control from anywhere, enhancing your home lighting experience.

Información de seguridade

Please read and understand all safety instructions before installing or using this product. Failure to follow these instructions may result in electric shock, fire, or other hazards.

• Só para uso en interiores: This bulb is designed for indoor use in dry locations. Do not use in wet or damp ambientes.
• Non para accesorios pechados: Do not use this bulb in fully enclosed luminaires or fixtures, as this can trap heat and shorten the bulb's lifespan.
• LED regulable: This bulb is dimmable, but it is not recommended for use with traditional wall dimmers. Control dimming via a compatible smart hub and app.
• Apagado antes da instalación: Always turn off the power to the fixture at the circuit breaker before installing or removing the bulb.
• Voltage Compatibilidade: Asegúrate do volume da luminariatage (120 Volts) matches the bulb's requirements.
• Manipular con coidado: Avoid dropping the bulb or subjecting it to excessive force.

Contido do paquete

The package for your Cree Connected LED Smart Bulb typically includes:

• 1 x Cree Connected LED Smart Bulb

The product packaging for the Cree Connected LED Smart Bulb.

Configuración

To set up your Cree Connected LED Smart Bulb, you will need a compatible ZigBee certified hub (e.g., Wink, SmartThings, WeMo, or Alexa devices with built-in ZigBee hub like Echo Plus, Echo Studio, Echo Show 2nd Gen).

1. Instala a lámpada: Screw the Cree Connected LED bulb into a standard E26 light socket. Ensure the power to the fixture is off before installation.
2. Prepare Your Hub: Place your compatible ZigBee hub into device discovery mode. Refer to your hub's specific instructions for this step. It is often recommended to initiate discovery mode on the hub antes turning on the bulb.
3. Power On the Bulb: Turn on the power to the light fixture. The bulb should light up. Your hub should detect and pair with the bulb automatically. A successful pairing is often indicated by the bulb blinking twice.
4. Download and Launch App: Download the applicable app for your chosen hub (e.g., Wink app, SmartThings app, Alexa app) on your iOS or Android device. Launch the app and follow the on-screen instructions to add and configure your new bulb.
5. Nomea a túa lámpada: Once paired, you can name your bulb within the app for easy identification and control (e.g., "Living Room Lamp," "Kitchen Light").

Resetting the Bulb to Factory Defaults

If you experience difficulty pairing the bulb or need to reset it, follow this sequence:

• 1. Turn the bulb DESACTIVADO durante 2 segundos.
• 2. Turn the bulb ON durante 1 segundo.
• 3. Turn the bulb DESACTIVADO durante 2 segundos.
• 4. Turn the bulb ON durante 1 segundo.
• 5. Turn the bulb DESACTIVADO durante 2 segundos.
• 6. Turn the bulb ON durante 1 segundo.
• 7. Turn the bulb DESACTIVADO durante 2 segundos.
• 8. Turn the bulb ON.

After the fourth ON cycle, the light will blink twice, indicating a successful reset. You can then attempt to pair the bulb again.

Cree Lighting offers a variety of smart lighting solutions.

Instrucións de funcionamento

Once your Cree Connected LED Smart Bulb is successfully paired with your hub, you can control it using the associated mobile application or voice commands through compatible smart assistants.

• Control On/Off: Use the app to turn the bulb on or off instantly.
• Adormecer: Adjust the brightness of the bulb to your desired level using the dimming controls within the app. The bulb offers a full range of dimming.
• Programación: Set schedules for your lights to turn on or off automatically at specific times, or to simulate occupancy when you are away from home.
• Agrupación: Group multiple Cree Connected bulbs together to control them simultaneously as a single unit.
• Control de voz: If connected to a voice assistant (e.g., Alexa), use voice commands to control your lights (e.g., "Alexa, turn on Living Room Light," "Alexa, dim Kitchen to 50%").

Control your smart bulbs easily through the mobile application.

Control your lights remotely for convenience and security.

Mantemento

The Cree Connected LED Smart Bulb requires minimal maintenance. Follow these guidelines to ensure optimal performance and longevity:

• Limpeza: Asegúrate de que a lámpada estea fría e que a alimentación estea desconectada antes de limpala. Limpe a lámpada cun pano suave e seco. Non empregues produtos de limpeza líquidos nin abrasivos.
• Almacenamento: If storing the bulb for an extended period, keep it in its original packaging or a protective container in a cool, dry place.
• Evite o sobrequecemento: Do not install the bulb in enclosed fixtures or areas with poor ventilation, as this can lead to overheating and reduce its lifespan.

Resolución de problemas

If you encounter issues with your Cree Connected LED Smart Bulb, refer to the following common problems and solutions:

Especificacións

Dimensions of the Cree Connected LED Smart Bulb.

Garantía e Soporte

Garantía: The Cree Connected LED Smart Bulb comes with a 3-year limited warranty. Please refer to the product packaging for complete details regarding warranty coverage and terms.

Soporte: For additional support, frequently asked questions, or to access the latest user guides and installation manuals, please visit the official Cree Lighting website. You may also find helpful resources in the PDF documents provided by the manufacturer:

• Manual de instalación (PDF)
• Guía de usuario (PDF)
• Manual do usuario (PDF)