RAB VANLED20 20W LED Canopy Light Fixture User Manual

1. Introdución

This manual provides detailed instructions for the installation, operation, and maintenance of the RAB VANLED20 20W LED Canopy Light Fixture. Please read this manual thoroughly before installation and retain it for future reference. This fixture is designed for commercial lighting applications, offering high efficiency and durability.

Image 1.1: The RAB VANLED20 20W LED Canopy Light Fixture. This image shows the compact, low-profile design of the white LED canopy light, suitable for various commercial installations.

2. Información de seguridade

AVISO: Risco de descarga eléctrica. Desconecte a alimentación no fusible ou no disyuntor antes da instalación ou do mantemento.

• A instalación debe ser realizada por un electricista cualificado de acordo con todos os códigos eléctricos nacionais e locais.
• Asegurar a subministración voltage is correct (120V-277V AC).
• Do not handle live components.
• Use o equipo de protección individual (EPI) axeitado durante a instalación.
• Este aparello é axeitado para lugares húmidos.
• Non modifiques o aparello. Calquera modificación pode anular a garantía e crear riscos para a seguridade.

3. Contido do paquete

Comprobe que todos os compoñentes estean presentes antes de comezar a instalación:

• RAB VANLED20 20W LED Canopy Light Fixture (1)
• Mounting Hardware (Screws, Gaskets, etc.)
• Guía de instalación (este documento)

4. Configuración e instalación

The VANLED20 is designed for ceiling mount installation to a recessed junction box or directly to the ceiling surface. It features side conduit entry points for flexible wiring.

1. Prepare o sitio de instalación:
   • Desconecte a enerxía no interruptor.
   • Ensure the mounting surface is structurally sound to support the fixture's weight (approximately 10.76 lbs).
2. Opcións de montaxe:
   • Recessed Junction Box: Use the provided knockout template to align and secure the fixture to the junction box.
   • Direct Ceiling Surface: Utilize the side conduit entry points for wiring. Secure the fixture directly to the ceiling using appropriate mounting hardware (not always included, check package contents).
3. Cableado:
   • Connect the fixture's wires to the building's electrical supply wires according to local electrical codes.
   • Asegurar a correcta posta a terra.
   • The fixture supports 120V-277V AC input.
   • Seal all conduit entries and the rear wire plug with weatherproof sealant to maintain the IP66 rating.
4. Fixar a lente:
   • Ensure the vandal-resistant polycarbonate textured opaque drop lens is securely fastened to the die-cast aluminum housing.
5. Restaurar enerxía:
   • Unha vez completada a instalación e todas as conexións estean seguras, restableza a alimentación no disxuntor.

5. Instrucións de funcionamento

The RAB VANLED20 is an automatic LED light fixture. Once properly installed and powered, it will illuminate. It does not feature manual on/off switches on the unit itself. Control is typically managed via the building's electrical circuit or an external remote control system, if integrated.

• Encendido: Ensure the circuit breaker supplying power to the fixture is in the "ON" position.
• Control remoto (opcional): If your installation includes a compatible remote control system, refer to the instructions provided with that system for operation. The fixture itself supports remote control functionality.
• Saída de luz: The 20W LED provides cool 5000K illumination.

6. Mantemento

The RAB VANLED20 LED Canopy Light Fixture is designed for minimal maintenance, offering a long operational life of up to 100,000 hours.

• Limpeza: Periodically clean the exterior of the fixture and lens with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or lens. Ensure power is off before cleaning.
• Inspección: Annually inspect the fixture for any signs of damage, loose connections, or wear. Pay attention to the integrity of the housing and lens.
• LED: The integrated LED array is not user-serviceable. If the LEDs fail, the entire fixture typically requires replacement.

7 Solución de problemas

If troubleshooting steps do not resolve the issue, contact RAB Lighting customer support or a qualified electrician.

8. Especificacións

• Modelo: VANLED20W
• Wattage: 20 W
• Fonte de luz: LED
• Temperatura de cor: 5000K (branco frío)
• Vol. De entradatage: 120 V-277 V CA
• Vida útil: 100,000 horas
• Material: Die-cast Aluminum Housing, Polycarbonate Lens
• Clasificación de protección de entrada (IP): IP66 (protexido contra o po e contra chorros de auga potentes)
• Listado UL: Adecuado para lugares húmidos
• Montaxe: Ceiling mount (recessed junction or direct surface)
• Peso: Aproximadamente 10.76 libras (4.88 kg)
• Método de control: Remote (via external system) / Push Button (via external system)
• UPC: 019813266299

9. Información da garantía

RAB Lighting products are backed by a comprehensive warranty. For specific warranty terms and conditions applicable to the VANLED20W fixture, please refer to the official RAB Lighting websitio web ou póñase en contacto co servizo de atención ao cliente. Garde o recibo da compra como proba de compra para reclamacións de garantía.

Note: The provided product data mentions optional protection plans (e.g., 4-Year Protection Plan). These are typically third-party plans and separate from the manufacturer's standard warranty.

10. Atención ao cliente

For technical assistance, replacement parts, or further information regarding your RAB VANLED20 20W LED Canopy Light Fixture, please contact RAB Lighting directly:

• Websitio: www.rablighting.com
• Teléfono: Refer to the RAB Lighting websitio para números de contacto actuais.
• Correo electrónico: Refer to the RAB Lighting website for current contact email addresses.

When contacting support, please have your model number (VANLED20W) and purchase date available.