Manual de instrucións das bisagras pivotantes de peche suave Rev-A-Shelf LD-0220-50SC

Introdución

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Rev-A-Shelf LD-0220-50SC Soft-Close Pivot Hinges. Please read this manual thoroughly before installation and retain it for future reference.

Información de seguridade

Use sempre o equipo de seguridade axeitado, incluída a protección ocular, durante a instalación.
Ensure all tools are in good working condition.
Manteña as pezas pequenas lonxe dos nenos para evitar riscos de asfixia.
Se tes dúbidas sobre algún paso, consulta cun profesional cualificado.

Contido do paquete

(1) Left Soft-Close Pivot Hinge
(1) Right Soft-Close Pivot Hinge
(1) Paquete de parafusos

Image: A pair of Rev-A-Shelf LD-0220-50SC Soft-Close Pivot Hinges, showing the spring-loaded mechanism and mounting plates.

Especificacións

Característica	Detalle
Número de modelo	LD-0220-50SC
Material	Metal
Tipo de acabado	Inacabado
Tipo de montaxe	Montaxe frontal
Ángulo de apertura	50 graos
Dimensións (ancho x profundo x alto)	1" (26 mm) W x 2-5/8" (67 mm) D x 3-7/8" (99 mm) H
Compoñentes incluídos	(1) Left hinge, (1) right hinge, and screw pack

Configuración e instalación

Proper installation is key to the smooth operation of your soft-close pivot hinges. Follow these steps carefully.

1. Measure Your Cabinet Opening

Before installing, accurately measure the width, height, and depth of your cabinet opening. This ensures compatibility and proper fit for any accessories you plan to use with the tip-out tray.

Video: This video from Rev-A-Shelf provides guidance on how to measure your cabinet opening correctly for various products.

Video: This video explains how to measure and determine if your cabinet hinge is a 1/2" overlay, which is important for proper fit.

2. Prepárese para a instalación

Identify the left (L) and right (R) hinges.
Ensure you have all necessary tools: drill, 3/32 drill bit, pencil, and screwdriver.

3. Mark and Drill Holes on Face Frame

With the drawer front panel still installed (or aligned to its desired location), use a pencil to lightly mark its perimeter on the front of the face frame.
Remove the drawer front panel.
Place one hinge on the appropriate side of the face frame. Align it so the bottom rests on the face frame and the front is flush with the face frame's front.
Trace the locations of two mounting holes onto the frame. Avoid holes too close to the top or bottom edges for easier drilling.
Repita para o outro lado.
Drill the marked holes into the face frame using a 3/32 drill bit.

Rev-A-Shelf LD-0220-50SC Soft-Close Pivot Hinge installed in a cabinet

Image: A Rev-A-Shelf Soft-Close Pivot Hinge installed on the inside of a cabinet, with a tip-out tray partially open.

4. Attach Hinges to Face Frame

Attach the hinges to the face frame using the provided screws.

5. Mark and Drill Holes on Drawer Front Panel

Place the drawer front panel against the face frame in its desired location, using your previously traced perimeter as a guide.
From the inside of the cabinet, mark the mounting hole locations from the hinges onto the back of the drawer front panel.
Remove the panel and carefully drill the mounting holes with a 3/32 bit. Caution: Do not drill all the way through the panel. A drill bit stop collar is recommended.

Rev-A-Shelf LD-0220-50SC Soft-Close Pivot Hinge installed in a cabinet with tip-out tray

Image: A Rev-A-Shelf Soft-Close Pivot Hinge installed on the inside of a cabinet, with a tip-out tray open, showing the hinge mechanism.

6. Install Drawer Front Panel

Attach the drawer front panel to the installed hinges. This can be done from inside the cabinet with the hinges "closed" or from outside with them "open."
Do not fully tighten screws until all four are in place and the panel is aligned.

Close-up of Rev-A-Shelf LD-0220-50SC Soft-Close Pivot Hinge mechanism

Imaxe: Primeiro plano view of the Rev-A-Shelf Soft-Close Pivot Hinge mechanism, demonstrating its movement.

7. Test and Adjust

Test the function of the tip-out tray.
If needed, slightly loosen the screws and adjust the panel to ensure it closes flush and evenly.

Video: This video demonstrates the installation and operation of the soft-close pivot hinges in a tip-out tray application.

Operación

The Rev-A-Shelf LD-0220-50SC hinges feature a 50-degree opening and a soft-close dampener mechanism. This allows the tip-out tray to open smoothly and close quietly, preventing slamming.

To open: Gently pull the top edge of the tip-out tray forward. The hinges will pivot, allowing access to the interior.
To close: Gently push the tip-out tray back into its closed position. The soft-close mechanism will engage, ensuring a quiet and controlled closure.

Video: This video illustrates the smooth operation of tip-out tray hinges, showcasing the soft-close feature.

Video: A short demonstration of a tilt-out tray hinge in operation, highlighting its functionality.

Mantemento

These hinges are designed for durability and require minimal maintenance.

Limpeza: Limpe as bisagras periodicamente cun pano suave eamp cloth to remove dust and debris. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
Lubricación: The hinges are pre-lubricated. If you notice any stiffness over time, a small amount of silicone-based lubricant can be applied to the pivot points.
Inspección: Regularly check all screws to ensure they are tight. Re-tighten if necessary.

Resolución de problemas

Tray Not Closing Softly

Comproba se hai obstáculos: Ensure nothing is blocking the hinge mechanism or the path of the tray.
Verificar a instalación: Re-check that the hinges are installed correctly and securely, and that the screws are not overtightened, which could impede movement.
Axustar o aliñamento: Slight adjustments to the panel's alignment might be needed. Loosen mounting screws slightly, adjust the panel, and re-tighten.

Tray Not Opening Smoothly

Comproba se hai restos: Clear any debris that might be caught in the hinge mechanism.
Lubricación: Apply a small amount of silicone-based lubricant to the pivot points if the movement feels stiff.

Garantía

Rev-A-Shelf LD-0220-50SC Soft-Close Pivot Hinges come with a Garantía limitada de por vida. This warranty covers defects in material and workmanship under normal use. For specific details regarding warranty claims, please refer to the official Rev-A-Shelf websitio ou póñase en contacto co servizo de atención ao cliente.

Apoio

For further assistance, technical support, or to inquire about replacement parts, please visit the official Rev-A-Shelf websitio ou póñase en contacto co seu departamento de atención ao cliente.

Websitio: www.rev-a-shelf.com

Atención ao cliente: Consulte o websitio para os detalles de contacto.

	Instrucións de instalación das bandexas basculantes de peche suave Rev-A-Shelf Guía paso a paso para instalar as bandexas abatibles de peche suave de Rev-A-Shelf nos armarios base dos lavabos. Inclúe as ferramentas necesarias, unha lista de pezas e instrucións detalladas para preparar os paneis, montar as bisagras e fixar as bandexas.
	Instrucións de instalación do recheo de armario/toilette Rev-A-Shelf Guía paso a paso para instalar o recheo de armario/baño Rev-A-Shelf, incluíndo as ferramentas necesarias, o tempo de montaxe e os consellos de mantemento.
	Rev-A-Shelf HampInstrucións de instalación do soporte da solapa Guía completa de instalación para Rev-A-Shelf HampSoporte de solapa, cunha lista de pezas, as ferramentas necesarias e instrucións de montaxe paso a paso con diagramas detallados descritos no texto.
	Guía de instalación do modelo de bisagra Rev-A-Shelf Este documento proporciona un modelo de bisagra de Rev-A-Shelf para fins de instalación. Inclúe instrucións e diagramas para a colocación de bisagras.
	Guía de instalación da bandexa de cubertos Rev-A-Shelf Instrucións completas de instalación para a bandexa de cubertos Rev-A-Shelf (modelo I-CT-0825), que detallan as medidas, os recortes e o coidado. Mellora a organización dos caixóns da túa cociña con esta guía.
	Instrucións de instalación do kit de montaxe na porta Rev-A-Shelf Guía completa para instalar o kit de montaxe para portas Rev-A-Shelf, que detalla as pezas, as ferramentas e a montaxe paso a paso para portas de armarios.

Rev-A-Shelf LD-0220-50SC