Manual de instrucións do sinal de saída con iluminación de bordo LED EUR70R de Cooper Lighting

1. Produto rematadoview

The Cooper Lighting Sure-Lites® EU Series EUR70R is a self-powered, LED edge-lit exit sign designed for recessed mounting. It features a red 'EXIT' legend and operates on 120/277 Volts AC. This unit provides reliable emergency illumination for egress pathways.

As características principais inclúen:

• Self-powered operation with an internal sealed lead calcium battery.
• Energy-efficient LED illumination.
• Anodized aluminum construction for durability.
• Recessed mounting for a clean aesthetic.
• Solid state, voltage limited charger.
• Baixo voltage disconnect to protect the battery.

2. Información de seguridade

WARNING: Risk of electric shock. Disconnect power before installation or servicing.

• All electrical connections must be made in accordance with local codes, ordinances, and the National Electric Code (NEC).
• A instalación debe ser realizada por persoal cualificado.
• Asegurar a subministración voltage is compatible with the fixture (120/277V AC).
• Non monte preto de quentadores de gas ou eléctricos.
• Do not allow power supply cords to be pinched or damaged.
• The battery is an integral component and is not user-replaceable.

3. Contido do paquete

Comprobe que todos os compoñentes estean presentes antes de comezar a instalación:

• EUR70R LED Edge-Lit Exit Sign unit
• Die-cast canopy (for mounting)
• Installation hardware (screws, wire nuts, etc. - may vary)
• Folla de instrucións (este documento)

4. Instalación (Configuración)

This exit sign is designed for recessed mounting. Follow these steps for proper installation:

1. Prepare o lugar de montaxe: Ensure the ceiling or wall opening is appropriately sized for recessed installation. The product dimensions are approximately 14.25 inches (L) x 12.88 inches (W) x 0.4 inches (D). Ensure there is sufficient depth and clearance for the fixture and wiring.
2. Desconectar a enerxía: Turn off the electrical power at the circuit breaker or fuse box before proceeding.
3. Conexións de cableado:
   • Connect the building's AC supply wires to the corresponding wires on the exit sign.
   • The unit is designed for 120V or 277V AC input. Connect the appropriate voltage wires as per the wiring diagram provided with the unit (refer to specific wiring labels on the fixture).
   • Ensure all connections are secure using approved wire connectors.
   • Conecte o cable de terra.
4. Montaxe do aparello:
   • Carefully insert the exit sign into the prepared recessed opening.
   • Secure the fixture using the provided mounting hardware and die-cast canopy, ensuring it is flush and stable.
5. Initial Power-Up and Battery Charge:
   • Restore AC power to the circuit.
   • The unit's internal battery will begin charging. Allow at least 24 hours for the battery to achieve a full charge before conducting any discharge tests.
   • Observe the charging indicator light (if present) to confirm proper operation.

Figure 1: Cooper Lighting EUR70R LED Edge-Lit Exit Sign. This image shows the front view of the exit sign with the red 'EXIT' legend, indicating its sleek, recessed design.

5. Funcionamento

The EUR70R exit sign operates automatically:

• AC Power Present: When normal AC power is supplied, the LED 'EXIT' legend will be illuminated, and the internal battery will be charged and maintained by the solid-state charger.
• AC Power Failure: In the event of an AC power interruption, the unit will automatically switch to battery power, illuminating the 'EXIT' legend for a minimum duration as required by safety codes. The low-voltage disconnect feature prevents deep discharge of the battery.
• AC Power Restored: When AC power is restored, the unit will automatically switch back to AC operation, and the battery will begin recharging.

6. Mantemento

Regular maintenance ensures the reliable operation of your exit sign.

• Proba mensual: Press and hold the test button (if present) for 30 seconds. The 'EXIT' legend should remain illuminated. Release the button; the legend should return to normal operation.
• Annual Test: Disconnect AC power to the unit for 90 minutes. The 'EXIT' legend should remain illuminated for the entire duration. Reconnect AC power after the test.
• Limpeza: Clean the sign's surface with a soft, damp pano. Non use produtos de limpeza ou disolventes abrasivos.
• Substitución da batería: The sealed lead calcium battery has a typical lifespan. If the unit fails to meet the required emergency illumination duration during testing, the battery may need replacement. This should be performed by qualified service personnel.

7 Solución de problemas

8. Especificacións

• Modelo: EUR70R
• Marca: Cooper Lighting Sure-Lites®
• Vol. De entradatage: 120/277 voltios CA
• Power Rating (AC): 3.6 Watts (120V), 4.5 Watts (277V)
• Fonte de luz: LED
• Legend Color: Red 'EXIT'
• Tipo de montaxe: Empotrado
• Material de construción: Aluminio anodizado
• Dimensións: 14.25 polgadas (L) x 12.88 polgadas (W) x 0.4 polgadas (D)
• Peso: Aproximadamente 2 libras
• Tipo de batería: Sealed Lead Calcium (internal, non-user replaceable)
• ASIN: B018HR72YY
• UPC: 993520725594

9. Garantía e soporte

For warranty information or technical support, please contact Cooper Lighting customer service. Retain your proof of purchase for warranty claims. Specific warranty terms and conditions may vary and are typically provided at the time of purchase or on the manufacturer's official websitio.

Fabricante: Iluminación Cooper