Manual de instrucións do altofalante de estantería DYNAUDIO Emit M10

Introdución

Thank you for choosing the DYNAUDIO Emit M10 Bookshelf Speakers. The M10 is the most compact model in the Emit range, designed to provide high-end audio performance. These speakers feature a 28 mm soft dome tweeter and a 14 cm MSP (Magnesium Silicate Polymer) mid/bass driver, coupled with a 1st order crossover. The Emit M10 is engineered for easy integration with various amplifiers, offering a 6 ohm impedance and an expertly tuned bass-reflex cabinet for impressive low-frequency response.

This manual provides essential information for the proper setup, operation, and maintenance of your new speakers to ensure optimal performance and longevity.

Información importante de seguridade

• Read these instructions thoroughly before operating the product.
• Conserve estas instrucións para referencia futura.
• Ten en conta todas as advertencias do produto e das instrucións de funcionamento.
• Siga todas as instrucións.
• Non use este aparello preto da auga.
• Limpar só cun pano seco.
• Non bloquee ningunha abertura de ventilación. Instáleo segundo as instrucións do fabricante.
• Non instale preto de fontes de calor como radiadores, rexistros de calor, cociñas ou outros aparellos (incluíndo amplificadores) que producen calor.
• Use só anexos/accesorios especificados polo fabricante.
• Encargue toda a reparación a persoal de servizo cualificado. O mantemento é necesario cando o aparello resultou danado dalgún xeito, como o cable de alimentación ou o enchufe está danado, se derrama líquido ou caen obxectos no aparello, o aparello estivo exposto á choiva ou á humidade, non funciona normalmente. , ou foi abandonado.

Contido do paquete

Carefully unpack your DYNAUDIO Emit M10 speakers and verify that all items are present:

• DYNAUDIO Emit M10 Bookshelf Speakers (Pair)
• Grills (Pair)
• Manual de instrucións (este documento)

Se falta algún artigo ou está danado, póñase en contacto co seu vendedor inmediatamente.

Configuración

Colocación de altofalantes

Proper speaker placement is crucial for optimal sound quality. Consider the following guidelines:

• Distancia desde Walls: Bookshelf speakers generally benefit from being placed a short distance from the rear wall to allow the bass-reflex port to function correctly and prevent excessive bass. Experiment with distances from 6 inches to 2 feet (15-60 cm).
• Altura: Position the speakers so that the tweeters are approximately at ear level when you are seated in your primary listening position. This often means placing them on dedicated speaker stands or sturdy shelves.
• Triángulo estéreo: For a stereo setup, place the speakers and your listening position to form an equilateral triangle. The distance between the speakers should be roughly equal to the distance from each speaker to your listening position.
• Toe-in: Experiment with angling the speakers slightly inward towards your listening position (toe-in). This can improve imaging and soundstage foco.

Imaxe: Fronte view of the white DYNAUDIO Emit M10 Bookshelf Speaker with the protective grill attached.

Imaxe: Fronte view of the white DYNAUDIO Emit M10 Bookshelf Speaker, showing the tweeter and mid/bass driver without the grill.

Conectando a un Ampmáis vivo

The DYNAUDIO Emit M10 speakers are passive speakers and require an external amplifier for operation. Follow these steps to connect your speakers:

1. Apagado: Asegura o teu ampAsegúrese de que o adaptador estea apagado e desconectado da toma de corrente antes de facer calquera conexión.
2. Cables de altofalantes: Use high-quality speaker cables. Strip approximately 1/2 inch (1.25 cm) of insulation from the ends of the speaker wires. Twist the bare strands tightly.
3. Polaridade: It is critical to connect the speakers with correct polarity. Connect the positive (+) terminal (red) on the speaker to the positive (+) terminal (red) on your amplifier. Similarly, connect the negative (-) terminal (black) on the speaker to the negative (-) terminal (black) on your amplifier. Incorrect polarity will result in poor sound quality, particularly in bass response.
4. Conexións seguras: Unscrew the binding posts on the back of the speaker and amplifier, insert the bare wire or banana plug, and tighten securely. Ensure no stray wire strands are touching other terminals, which could cause a short circuit.

Imaxe: Traseira view of the white DYNAUDIO Emit M10 Bookshelf Speaker, highlighting the bass-reflex port and the speaker wire binding posts.

Funcionamento dos altofalantes

Once your speakers are properly connected to an amplifier, you can begin enjoying your audio system.

• Encendido: Conéctate e acende o teu ampmáis vivo.
• Control de volume: Comeza co amplifier's volume control at its lowest setting and gradually increase it to a comfortable listening level.
• Período de rodaxe: Like many high-fidelity audio components, your speakers may benefit from a "break-in" period. This typically involves 50-100 hours of normal use, during which the drivers will loosen up and the sound quality may improve further.
• Grellas: The included grills protect the speaker drivers. You may choose to use them or remove them for a slightly different aesthetic and potentially a subtle change in sound, though the acoustic impact is generally minimal.

Mantemento

To ensure the longevity and optimal performance of your DYNAUDIO Emit M10 speakers, follow these maintenance guidelines:

• Limpeza: Dust the speaker cabinets regularly with a soft, dry, lint-free cloth. For stubborn marks, lightly dampen the cloth with water, but avoid using harsh chemicals, abrasive cleaners, or solvents, as these can damage the finish.
• Grellas: The speaker grills can be gently cleaned with a soft brush or a vacuum cleaner with a brush attachment.
• Evite a luz solar directa e a calor: Do not expose the speakers to direct sunlight for extended periods or place them near heat sources, as this can cause discoloration or damage to the cabinet and drivers.
• Humidade: Keep the speakers away from excessive moisture or humidity.
• Protección do controlador: Avoid touching the speaker drivers (tweeter and woofer) directly, as this can cause damage.

Resolución de problemas

Se tes problemas cos altofalantes, consulta os seguintes problemas e solucións comúns:

• Sen son:
  • Asegurar o amplifier is powered on and connected correctly.
  • Comprobe todas as conexións dos cables dos altofalantes en ambos os amplifier and the speakers for secure contact and correct polarity.
  • Verifique que a fonte de entrada correcta estea seleccionada no seu ampmáis vivo.
  • Confirm the volume is turned up on the ampmáis vivo.
• Son distorsionado:
  • Reduce o nivel de volume do teu amplificador. Sobrecargar os altofalantes pode causar distorsión.
  • Comprobe as conexións do cable do altofalante para ver se hai algún fío solto ou curtocircuíto.
  • Asegurar o amplifier's power output is suitable for the speakers (refer to specifications).
  • Comprobe se a fonte de son ten distorsión.
• Graves débiles:
  • Verify correct speaker polarity (+ to + and - to -) for both speakers. Incorrect polarity will cause bass cancellation.
  • Experiment with speaker placement, moving them closer to a wall can sometimes increase bass response.
• Sons desiguaistage / Imaging Issues:
  • Ensure speakers are placed symmetrically and at equal distances from the listening position.
  • Adjust speaker toe-in.

If the problem persists, consult your retailer or qualified service personnel.

Especificacións

Image: Diagram illustrating the dimensions of the black DYNAUDIO Emit M10 Bookshelf Speaker.

Garantía e Soporte

Información da garantía

Your DYNAUDIO Emit M10 Bookshelf Speakers are covered by a FIVE YEAR MANUFACTURER DEFECT WARRANTYEsta garantía cobre defectos de materiais e fabricación en condicións normais de uso. Conserve o comprobante de compra para reclamacións de garantía.

For specific terms and conditions of the warranty, please refer to the documentation provided with your purchase or visit the official DYNAUDIO websitio.

Atención ao cliente

If you require technical assistance, have questions about your product, or need to initiate a warranty claim, please contact your authorized DYNAUDIO retailer or visit the official DYNAUDIO support websitio para obter máis axuda.

Please have your product model number (EMIT 10) and proof of purchase ready when contacting support.