SOMMER 4079V000 Wireless Keypad Instruction Manual

Produto rematadoview

The SOMMER 4079V000 Wireless Keypad is designed for secure and convenient access to your garage. This 12-channel keypad operates on a 310 MHz rolling code frequency, ensuring enhanced security. It is capable of managing up to 10 different garage doors, each with its own unique code ranging from 1 to 9 digits in length.

Características principais:

• 12-Channel Wireless Keypad
• 310 MHz Rolling Code Technology
• Capable of operating up to 10 garage doors
• Supports codes from 1 to 9 digits in length

Configuración e instalación

1. Instalación da batería

The keypad requires one CR123A battery, which is included. To install the battery:

1. Locate the battery compartment cover on the back of the keypad.
2. Retire a tapa.
3. Insert the CR123A battery, ensuring correct polarity (+/-).
4. Coloque a tapa do compartimento da batería de forma segura.

2. Montaxe do teclado

Choose a suitable location outside your garage for mounting. The keypad should be installed at least 5 feet (1.5 meters) above the ground, in a position that is easily accessible but away from any moving parts of the garage door. Use the provided holder and fasteners to securely attach the keypad to the desired surface.

3. Programación do teclado numérico

To program the keypad to your SOMMER garage door opener:

1. Locate the 'Learn' or 'Program' button on your SOMMER garage door opener unit. The exact location may vary by model.
2. Press and immediately release the 'Learn' or 'Program' button. The indicator light on the opener should illuminate or flash, signaling it is ready to learn a new code. You typically have 30 seconds to complete the next step.
3. On the 4079V000 keypad, enter your desired 1-9 digit access code.
4. Press the 'Enter' button on the keypad.
5. The garage door opener's light should flash or click, indicating that the code has been successfully programmed.
6. Test the programmed code by entering it on the keypad and pressing 'Enter'. The garage door should activate.

Instrucións de funcionamento

To operate your garage door using the SOMMER 4079V000 Wireless Keypad:

1. Enter your previously programmed access code on the keypad.
2. Prema o botón "Intro".
3. The garage door will open or close.

Changing Your Access Code

To change an existing access code, you will need to reprogram the keypad following the 'Programming the Keypad' steps in the Setup section. This will overwrite the old code with the new one.

Mantemento

Substitución da batería

When the keypad's backlight dims, or if the keypad becomes unresponsive, it is likely time to replace the CR123A battery. Follow the battery installation steps outlined in the 'Setup and Installation' section.

Limpeza

Clean the surface of the keypad with a soft, damp cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the keypad's finish or internal components.

Resolución de problemas

• O teclado non responde:
  Check the battery level. If the backlight is dim or non-existent, replace the CR123A battery. Ensure the keypad is within effective range of the garage door opener. If issues persist, try reprogramming the keypad to the opener.
• Garage door not opening/closing:
  Verify that the access code is entered correctly. Ensure the garage door opener itself is powered and functioning. Check for any physical obstructions preventing the door from moving.
• Problema de compatibilidade:
  The SOMMER 4079V000 keypad operates on a 310 MHz frequency. It is crucial to ensure that your SOMMER garage door opener is compatible with this specific frequency. Newer SOMMER garage door opener models may utilize different frequencies (e.g., 922 MHz) and will not be compatible with this 4079V000 keypad. Always confirm frequency compatibility before purchase or troubleshooting.

Especificacións

Información da garantía

The SOMMER 4079V000 Wireless Keypad is covered by a 2-year warranty from the original date of purchase. Please retain your proof of purchase, such as a receipt or order confirmation, as it will be required for any warranty claims. This warranty covers defects in materials and workmanship under normal use.

Atención ao cliente

For additional assistance, technical support, or inquiries regarding your SOMMER 4079V000 Wireless Keypad, please visit the official SOMMER website or contact SOMMER customer service directly. When contacting support, please have your product model number (4079V000) readily available to expedite service.