1. Produto rematadoview
The Troy Lighting B5311 is a transitional one-light wall sconce from the Equilibrium collection, featuring a textured bronze finish. This fixture is designed for indoor use and provides ambient lighting.
Imaxe 1.1: Fronte view of the Troy Lighting B5311 Wall Sconce, showcasing its textured bronze finish and glass shade.
Imaxe 1.2: En ángulo view of the Troy Lighting B5311 Wall Sconce, highlighting the design and proportions.
2. Información de seguridade
- Always turn off the electrical power at the main fuse or circuit breaker box before beginning installation.
- Consulte a un electricista cualificado se non está seguro sobre o proceso de instalación.
- Todas as conexións eléctricas deben estar de acordo cos códigos e as ordenanzas locais ou co Código Eléctrico Nacional (NEC).
- Use só o tipo de lámpada e o wat especificadostage to avoid overheating or damage.
- Non instale este accesorio en lugares húmidos ou secos.amp locations. It is designed for dry, indoor use only.
- Manexa os compoñentes de vidro con coidado para evitar que se rompan.
3. Contido do paquete
Verify that all components are present before beginning installation. If any parts are missing or damaged, do not attempt to assemble or install the fixture.
- Wall Sconce Fixture (Model B5311)
- Sombra de vidro
- Mounting Hardware (Crossbar, mounting screws, wire nuts)
- Manual de instrucións
4. Instalación
Follow these steps carefully for proper installation of your wall sconce.
- Apagar a enerxía: Antes de comezar, asegúrese de que a alimentación da caixa de conexións estea desconectada no disyuntor ou na caixa de fusibles.
- Preparación da montaxe: Attach the mounting crossbar to the junction box using the provided mounting screws. Ensure the crossbar is securely fastened.
- Conexións de cable: Connect the fixture's wires to the corresponding house wires. Connect the black (hot) fixture wire to the black (hot) house wire, the white (neutral) fixture wire to the white (neutral) house wire, and the green or bare copper (ground) fixture wire to the green or bare copper (ground) house wire. Secure connections with wire nuts and wrap with electrical tape for added safety.
- Fixación de montaxe: Carefully tuck the wires into the junction box. Align the fixture's backplate with the mounting screws on the crossbar and secure the fixture in place with the decorative nuts or screws.
- Instalar lámpada: Insert one (1) 60-watt maximum incandescent or equivalent LED bulb into the socket. (Bulb not included).
- Fixar a pantalla de vidro: Carefully place the glass shade onto the fixture according to the design. Ensure it is stable and secure.
- Restaurar enerxía: Once installation is complete and all components are secure, restore power at the circuit breaker.
5. Funcionamento
The Troy Lighting B5311 wall sconce operates via a standard wall switch connected to the electrical circuit. Simply toggle the wall switch to turn the light fixture on or off.
6. Mantemento
- Limpeza: To clean the fixture, turn off the power and allow it to cool. Wipe with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or glass.
- Substitución da lámpada: Ensure power is off and the bulb has cooled before replacing. Unscrew the old bulb and screw in a new one of the same type and wattage (máx. 60 W).
- Inspección: Comprobe periodicamente todas as conexións e os accesorios de montaxe para garantir que se manteñan firmes.
7 Solución de problemas
If your wall sconce is not functioning correctly, refer to the following table for common issues and solutions.
| Problema | Causa posible | Solución |
|---|---|---|
| A luz non se acende | Non hai enerxía para o dispositivo | Comprobe o disxuntor ou o fusible. Asegúrese de que o interruptor de parede estea acendido. |
| Light bulb is faulty | Bulb has burned out or is not properly seated | Replace bulb with a new one. Ensure bulb is screwed in tightly. |
| Conexións de fíos soltas | Wires are not securely connected | Turn off power, then check and tighten all wire connections. |
| Parpadea o aparello | Lámpada ou cableado solto | Turn off power, check bulb seating and wire connections. |
If the problem persists after attempting these solutions, contact a qualified electrician or Troy Lighting customer support.
8. Especificacións
| Característica | Detalle |
|---|---|
| Marca | Iluminación Troy |
| Número de modelo | B5311 |
| Estilo | Transitoria |
| Remate | Bronce texturado |
| Material | Metal, Vidro |
| Cor de sombra | Plated Topaz |
| Número de luces | 1 |
| Wattage | 60 vatios (máximo) |
| Voltage | 120 voltios |
| Fonte de enerxía | Eléctrico con cable |
| Dimensións do produto | 10.25 x 5 x 28.5 polgadas (L x W x H) |
| Peso do elemento | 10 libras |
| Tipo de montaxe | Soporte de parede |
9. Garantía e soporte
This Troy Lighting B5311 wall sconce comes with a Garantía limitada do fabricante de 1 anos. Esta garantía cobre os defectos nos materiais e na fabricación no uso normal.
For warranty claims, technical support, or inquiries regarding your product, please contact Troy Lighting customer service directly. Keep your proof of purchase for warranty validation.
For further assistance, please refer to the official Troy Lighting websitio web ou póñase en contacto cos seus canais de atención ao cliente.
