Casio G-SHOCK AWG-M100SB-2A Radio Wave Solar Watch User Manual

Introdución

This manual provides essential instructions for the proper use and maintenance of your Casio G-SHOCK AWG-M100SB-2A watch. This timepiece features G-SHOCK's renowned shock resistance, 100-meter water resistance, Tough Solar power, and Multi-Band 6 radio-controlled timekeeping for accurate time synchronization.

Please read this manual thoroughly to ensure correct operation and to take full advantage of your watch's capabilities. Keep this manual for future reference.

Figura 1: Fronte view of the Casio G-SHOCK AWG-M100SB-2A watch, displaying its analog and digital elements.

Configuración

1. Cargo inicial

Your watch is equipped with Tough Solar power. Before initial use, expose the watch face to bright light for several hours to ensure it is adequately charged. Avoid prolonged storage in dark places to prevent the power level from dropping.

2. Setting Your Home City

The Home City setting is crucial for correct time display and radio signal reception. To set your Home City:

1. In Timekeeping Mode, hold down the Axustar button (top left) for approximately two seconds until the city code starts to flash.
2. Usa o REVERSO (top right) and ADIANTE (bottom right) buttons to select your desired city code.
3. Preme o MODO button (bottom left) to cycle through other settings (DST, 12/24-hour format, etc.) and adjust as needed using the REVERSO e ADIANTE botóns.
4. Preme Axustar para saír da pantalla de configuración.

3. Time Calibration (Radio Wave Reception)

The watch automatically receives time calibration signals. For optimal reception, place the watch near a window at night. You can also perform manual reception:

1. In Timekeeping Mode, hold down the ADIANTE button (bottom right) for approximately two seconds.
2. The watch will attempt to receive the calibration signal. This process can take several minutes.
3. After reception, the display will show 'GET' if successful, or 'ERR' if unsuccessful.

Imaxe 2: Primeiro plano view of the watch dial, highlighting the analog hands, digital displays, and button labels (ADJUST, REVERSE, MODE, FORWARD).

En funcionamento

Funcións dos botóns

• Axustar (Top Left): Used to enter and exit setting modes, and to confirm settings.
• MODO (Bottom Left): Cycles through the watch's different modes (Timekeeping, World Time, Stopwatch, Countdown Timer, Alarm).
• REVERSO (Top Right): Used to scroll backward through settings or increase values.
• ADIANTE (Bottom Right): Used to scroll forward through settings, decrease values, or initiate manual radio signal reception.

Figura 3: Lateral view of the watch, illustrating the placement and labels of the control buttons.

Modo de navegación

Preme o MODO button to switch between the following functions:

• Modo de hora: Mostra a hora e data actuais.
• Modo hora mundial: View the current time in various cities around the globe.
• Modo cronómetro: Medir o tempo transcorrido.
• Modo de temporizador de conta atrás: Definir unha conta atrás a partir dun tempo especificado.
• Modo de alarma: Set up to five daily alarms and an hourly sinal horario.

Iluminación

Preme o REVERSO button (top right) in Timekeeping Mode to activate the LED light for illumination of the analog dial. The duration of the illumination can be adjusted in the settings.

Hand Shift Feature

If the analog hands obstruct the digital displays, you can temporarily shift them. In any mode, hold down the MODO button for approximately two seconds. The hands will move to a position that does not block the digital displays. To return the hands to normal timekeeping, press any button.

Mantemento

Limpeza

Wipe the watch regularly with a soft, dry cloth to remove dirt and moisture. For stubborn dirt, use a soft cloth dampened with water and a mild neutral detergent, then wipe dry.

Resistencia á auga

This watch is water resistant to 100 meters. It is suitable for swimming and snorkeling. Do not operate any buttons while the watch is wet or submerged in water.

Xestión de enerxía

To maintain optimal power levels, expose the watch face to light whenever possible. Avoid storing the watch in dark places for extended periods, as this can deplete the battery and affect functionality.

Resolución de problemas

• Visualización incorrecta da hora:
  Check your Home City setting. Ensure the watch is receiving time calibration signals. If automatic reception is not working, try manual reception. If the analog hands do not match the digital time, perform a hand alignment correction (refer to the full manual for detailed steps).
• No Display or Low Power Indicator:
  The watch may be low on power. Expose the watch face to bright light for several hours to charge it.
• Botóns que non responden:
  Ensure the watch is not in a frozen state due to low power. If the issue persists after charging, a full reset might be necessary (consult the comprehensive Casio module manual for your specific module number, usually found on the case back).

Especificacións

Figura 4: Traseira view of the watch, showing the stainless steel case back with model and water resistance markings.

Información da garantía

For detailed warranty information, please refer to the warranty card included with your purchase or contact your retailer. Casio's official website may also provide regional warranty details.

Apoio

Should you require further assistance or have questions not covered in this manual, please visit the official Casio website or contact Casio customer support in your region. Ensure you have your watch's model number (AWG-M100SB-2A) ready when seeking support.