1. Introdución
This manual provides instructions for the installation, operation, and maintenance of the Morris Products Flat Panel LED Small Flood Light, Model 71533. This energy-efficient LED floodlight features a low-profile design and is suitable for various indoor and outdoor applications.
2. Información de seguridade
- AVISO: Risco de descarga eléctrica. Desconecte a alimentación no fusible ou no disyuntor antes da instalación ou do mantemento.
- A instalación debe ser realizada por un electricista cualificado de acordo con todos os códigos eléctricos nacionais e locais.
- Asegurar a subministración voltage is compatible with the fixture's requirements (120/208/240/277V).
- Do not handle live wires.
- Use o equipo de protección individual (EPI) axeitado durante a instalación.
- This fixture is designed for wet locations (IP65, NEMA 4X).
3. Contido do paquete
Ao abrir o paquete, comprobe que todos os compoñentes estean presentes e estean intactos. Se falta algunha peza ou está danada, póñase en contacto co servizo de atención ao cliente.
- Flat Panel LED Small Flood Light (Model 71533)
- Soporte de soporte
Figure 3.1: Product packaging showing the Morris Products Flat Panel LED Small Flood Light box.
4. Configuración e instalación
This flood light is designed for surface mount installation using the included bracket. Ensure the mounting surface is structurally sound to support the fixture's weight.
4.1 Montaxe do aparello
- Identifique un lugar de montaxe adecuado.
- Position the bracket mount against the surface and mark the drilling points.
- Perfore buratos guía segundo sexa necesario.
- Secure the bracket mount to the surface using appropriate hardware (not included).
- Attach the flood light fixture to the bracket, ensuring it is securely fastened. The bracket allows for adjustment of the light's angle.
Figura 4.1: Fronte view of the flood light showing the LED panel and bracket mount.
4.2 Cableado eléctrico
IMPORTANTE: All electrical wiring should be performed by a licensed electrician. Ensure power is disconnected at the circuit breaker before proceeding.
- The fixture supports Quad Voltage (120/208/240/277V). Connect the appropriate wires from the power supply to the fixture's wires.
- Typically, the black wire is Line (L), the white wire is Neutral (N), and the green wire is Ground (G). Refer to local electrical codes for specific color conventions.
- Use UL-listed wire connectors to secure all connections.
- Asegúrate de que todas as conexións estean axustadas e debidamente illadas.
Figura 4.2: Atrás view of the flood light, illustrating the wiring entry point and product label.
5. Instrucións de funcionamento
Once properly installed and wired, the Morris Products Flat Panel LED Small Flood Light operates by receiving power from the connected electrical circuit.
- Encendido/apagado: The light is controlled by the external switch or remote control connected to its circuit.
- Saída de luz: The fixture provides 6,179 lumens of 5000K Cool White light.
- Photo Control (Optional): A photo control unit can be installed remotely to enable automatic dusk-to-dawn operation. This feature is not integrated into the fixture itself.
6. Mantemento
The Morris Products Flat Panel LED Small Flood Light is designed for minimal maintenance due to its durable construction and long-life LED components.
- Limpeza: Periodically clean the polycarbonate lens with a soft, damp un pano para garantir unha saída de luz óptima. Evite produtos de limpeza abrasivos.
- Inspección: Annually inspect the fixture and wiring for any signs of damage or wear. Ensure all mounting hardware remains secure.
- Resistencia á corrosión: The bronze die-cast aluminum housing is corrosion-resistant, suitable for outdoor environments.
- Vida LED: The LED light source has an expected life of 50,000+ hours, reducing the need for frequent bulb replacement.
7 Solución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| A luz non acende. | No power supply; faulty wiring; tripped circuit breaker; defective fixture. | Check power supply at the source. Verify all wiring connections. Reset circuit breaker. If problem persists, consult a qualified electrician or contact customer support. |
| A luz parpadea ou esmorece. | Unstable power supply; loose wiring connection; incompatible dimmer (if applicable). | Ensure stable power. Check and tighten all wiring connections. This fixture is not designed for dimming unless specified by an external controller. |
| Redución da saída de luz. | Dirty lens; extreme operating temperature. | Clean the lens. Ensure the fixture is operating within its specified temperature range (-40°F to 131°F). |
8. Especificacións
| Número de modelo | 71533 |
| Marca | Produtos Morris |
| Wattage | 50 vatios |
| Fluxo luminoso | 6,179 lúmenes |
| Temperatura da cor | 5000K (branco frío) |
| Voltage | 120/208/240/277V (Quad Voltage) |
| Material da vivenda | Aluminio fundido a presión |
| Material da lente | Policarbonato |
| Acabado Cor | Bronce |
| Esperanza de vida LED | Máis de 50,000 horas |
| Temperatura de funcionamento | -40 °F a 131 °F (-40 °C a 55 °C) |
| Clasificación IP | IP65 (NEMA 4X) Dust & Water Tight |
| Certificacións | cULus Listed for Wet Locations, DLC Listed |
| Dimensións | Aproximadamente 2 x 6 x 6 polgadas |
| Peso do elemento | 2 libras |
9. Garantía e soporte
The Morris Products Flat Panel LED Small Flood Light (Model 71533) comes with a 5 ano de garantía desde a data de compra, cubrindo defectos de materiais e fabricación en condicións de uso normal.
For warranty claims, technical support, or any inquiries, please contact Morris Products customer service. Keep your purchase receipt as proof of purchase.
Información de contacto:
Please refer to the Morris Products official websitio web ou na documentación da súa compra para obter os datos de contacto máis actuais.
