Manual de instrucións do subwoofer compacto dual JBL Professional Control SB2210

1. Introdución

This manual provides essential information for the proper installation, operation, and maintenance of your JBL Professional Control SB2210 Dual Compact Subwoofer. Please read this manual thoroughly before using the product to ensure optimal performance and longevity. Retain this manual for future reference.

The Control SB2210 is designed to provide low-frequency reinforcement for various sound system applications. Its compact size, high output, and outdoor-capable design make it suitable for diverse installation environments.

2. Características clave

• Dual 250 mm (10 inch) woven fiberglass cone LF drivers.
• 500 watts continuous program power handling.
• Frequency response extending down to 38 Hz.
• 13 x M6 insert points for versatile mounting options, including optional U-bracket.
• Compacto, pouco profesionalfile design for discreet integration.

3. Produto rematadoview

Figura 3.1: Fronte e lateral view of the JBL Control SB2210 Subwoofer. This image displays the white enclosure and the perforated metal grille covering the dual 10-inch drivers.

Figura 3.2: Fronte directa view of the JBL Control SB2210 Subwoofer. The JBL Professional logo is visible on the center of the grille.

Figura 3.3: Lado view of the JBL Control SB2210 Subwoofer, highlighting its compact and low-profile deseño.

Figura 3.4: Rear panel of the JBL Control SB2210 Subwoofer, showing the input terminals and model identification plate.

4. Configuración e instalación

4.1 Desembalaxe

Carefully remove the subwoofer from its packaging. Inspect the unit for any signs of damage that may have occurred during transit. If damage is found, contact your dealer immediately.

4.2 Colocación

The Control SB2210 is designed for versatile placement, including floor, shelf, or wall mounting. Thirteen M6 insert points are provided for installation using forged shoulder eyebolts (not included) or the optional MTC-22MB U-bracket. For outdoor applications, ensure the unit is installed in a location that minimizes direct exposure to harsh weather conditions, although it is outdoor-capable.

4.3 Cableado e conexións

The SB2210 is a passive subwoofer and requires connection to an external amplifier. Use appropriate gauge speaker wire to connect the subwoofer's input terminals to the amplifier's output. Ensure correct polarity (+ to + and - to -) for optimal audio performance. The input terminals are screw-down barrier strips, accepting up to 9 mm (0.35 in) bare wire, spade lugs, or banana plugs.

The subwoofer is designed to be used with compatible devices such as an amplifier, audio processor, or receiver.

5. Funcionamento

5.1 Manexo de enerxía

The Control SB2210 has a continuous program power handling of 500 watts. It is crucial to match the amplifier's output power to the subwoofer's power handling capabilities to prevent damage. Overdriving the subwoofer can lead to distortion and potential component failure.

5.2 Integración de sistemas

For optimal performance, integrate the subwoofer with a suitable crossover network to direct low frequencies to the SB2210 and higher frequencies to full-range loudspeakers. This ensures efficient operation and balanced sound reproduction.

6. Mantemento

6.1 Limpeza

To clean the subwoofer, use a soft, dry cloth. For stubborn dirt, a slightly damp cloth may be used. Avoid using harsh chemicals, solvents, or abrasive cleaners, as these can damage the enclosure and grille finish. The grille is coated with a combination of materials that, while acoustically transparent, prevent the intrusion of water into the cabinet.

6.2 Consideracións ambientais

While the Control SB2210 is designed for outdoor use, it is not waterproof. Ensure it is protected from direct heavy rain or prolonged exposure to extreme weather conditions to maintain its performance and appearance over time.

7 Solución de problemas

If you experience issues with your JBL Control SB2210 Subwoofer, consult the following common troubleshooting steps:

• Sen son:
  • Verify all cable connections between the amplifier and the subwoofer are secure and correctly polarized.
  • Asegurar o ampo lifier está acendido e funciona correctamente.
  • Check the audio source and its connections.
• Son distorsionado:
  • Reduce o nivel de volume do teu amplifier or audio source. Overdriving the subwoofer can cause distortion.
  • Asegurar o amplifier's power output is appropriate for the subwoofer's power handling.
  • Comprobe se hai conexións soltas ou cables danados.
• Weak Bass Output:
  • Confirm correct polarity of speaker wire connections. Incorrect polarity can cause phase cancellation and reduced bass.
  • Verify the crossover settings on your amplifier or audio processor are correctly configured for the subwoofer.
  • Adjust the subwoofer's level or gain settings on your ampmáis vivo.

If these steps do not resolve the issue, contact JBL Professional customer support or a qualified service technician.

8. Especificacións

Figura 8.1: Page 1 of the JBL Control SB2210 Subwoofer specification sheet, detailing key features, description, and system specifications.

Figura 8.2: Page 2 of the JBL Control SB2210 Subwoofer specification sheet, including frequency response graph and mounting dimensions.

9. Garantía e soporte

9.1 Información da garantía

This JBL Professional product comes with a Limited Warranty. Please refer to the warranty card included with your product or visit the official JBL Professional websitio web para obter termos e condicións detallados relativos á cobertura da garantía.

9.2 Atención ao cliente

For technical assistance, service, or further information, please contact JBL Professional customer support. Contact details can typically be found on the JBL Professional websitio web ou na embalaxe do teu produto.

Recursos en liña: For additional product information, FAQs, and support documents, please visit the Tenda JBL en Amazon or the official JBL Professional websitio.