1. Introdución
Thank you for choosing the Gladen RS-X-08 High Performance 8" Subwoofer. This manual provides essential information for the proper installation, operation, and maintenance of your new subwoofer. Please read this manual thoroughly before installation and keep it for future reference.
The Gladen RS-X-08 is designed to deliver powerful and precise bass reproduction, enhancing your audio experience. It features a robust construction with a vented die-cast basket, black Nomex spider, paper cone, and PP-dust cap, ensuring durability and high performance.
2. Información de seguridade
- Desconecte sempre a batería do vehículo antes de realizar calquera traballo eléctrico.
- Asegúrate de que todo o cableado estea correctamente instalado e fixado para evitar danos ou curtocircuítos.
- Non expoña o subwoofer a humidade excesiva nin a temperaturas extremas.
- Use appropriate gauge wiring for power and speaker connections to avoid overheating.
- Consulta cun instalador profesional se tes dúbidas sobre algún paso de instalación.
- Operating the subwoofer at excessively high volumes for prolonged periods can cause hearing damage.
3. Características do produto
The Gladen RS-X-08 subwoofer incorporates advanced design and materials for superior audio performance:
- Cono: Paper for optimal sound reproduction.
- Rodea: Foam for flexibility and excursion.
- Cesta: Vented die-cast aluminum for rigidity and heat dissipation.
- Araña: Black Nomex for durability and precise cone control.
- Tapón antipolvo: PP-dust cap.
- Bobina de voz: Aluminum former.
- Impedancia: 4 Ohm nominal impedance.
- Manexo de potencia: 250 Watts RMS / 375 Watts Peak.
Figura 3.1: Fronte view of the Gladen RS-X-08 Subwoofer, showing the paper cone, foam surround, and Gladen logo on the dust cap.
4. Especificacións
| Parámetro | Valor |
|---|---|
| Tipo de altofalante | Subwoofer |
| Diámetro do subwoofer | 8 polgadas (20 cm) |
| Manexo de potencia RMS | 250 vatios |
| Manexo de potencia máxima | 375 vatios |
| Impedancia nominal | 4 ohmios |
| Resistencia DC (Re) | 3.75 ohmios |
| Frecuencia de resonancia (Fs) | 43.02 Hz |
| Diámetro da bobina de voz | 2 polgadas |
| Xmáx | 8 mm |
| Masa móbil (Mms) | 99.39 g |
| Área efectiva do pistón (Sd) | 216 cm² |
| Mechanical Resistance (Rms) | 4.79 kg/s |
| Compliance (Cms) | 0.14 mm / N |
| Factor de forza (Bl) | 11.35 Tm |
| Equivalent Air Volume (Vas) | 9.02 dm³ |
| Diámetro exterior | 216 mm (8.50 polgadas) |
| Diámetro de instalación | 183 mm (7.20 polgadas) |
| Profundidade de instalación | 104 mm (4.09 polgadas) |
| Diámetro do imán | 126 mm (4.96 polgadas) |
| Recommended Enclosure (Vented) | 18 litros |
| Recommended Enclosure (Sealed) | 12 litros |
Figura 4.1: Traseira view of the Gladen RS-X-08 Subwoofer, highlighting the vented basket and speaker terminals.
5. Configuración e instalación
Proper installation is crucial for optimal performance and longevity of your subwoofer. It is highly recommended to have the subwoofer installed by a qualified professional.
5.1 Recomendacións de carcasa
The RS-X-08 is designed to perform well in both sealed and vented enclosures:
- Caixa ventilada: Approximately 18 liters (0.64 cubic feet).
- Caixa selada: Approximately 12 liters (0.42 cubic feet).
Ensure the enclosure is robust, airtight (for sealed), and properly braced to prevent rattles and vibrations.
5.2 Conexións de cableado
The RS-X-08 has a 4 Ohm nominal impedance. Connect the subwoofer to a suitable amplifier capable of delivering the required power (250-375 Watts RMS) at a 4 Ohm load.
- Connect the positive (+) terminal of the subwoofer to the positive (+) output of the ampmáis vivo.
- Connect the negative (-) terminal of the subwoofer to the negative (-) output of the ampmáis vivo.
- Use high-quality speaker wire of appropriate gauge (e.g., 12-14 gauge) for runs up to 10 feet.
Imaxe 5.1: Primeiro plano view of the Gladen RS-X-08 Subwoofer's cone and foam surround, showing the red stitching detail.
5.3 Montaxe
The subwoofer requires an installation diameter of 183 mm (7.20 inches) and an installation depth of 104 mm (4.09 inches). Ensure sufficient clearance behind the mounting surface for proper ventilation and magnet clearance.
6. Instrucións de funcionamento
Unha vez instalado, siga estas pautas para un funcionamento óptimo:
- Período de rodaxe: Allow a break-in period of approximately 20-30 hours of normal listening before pushing the subwoofer to its limits. This allows the suspension components to loosen up and perform optimally.
- Configuración de ganancia: Establece o ampganancia do lificador correctamente para coincidir co volume de saídatage da unidade principal. Uns axustes de ganancia incorrectos poden provocar distorsión e posibles danos no subwoofer.
- Configuración de cruce: Usa un filtro de paso baixo (LPF) no teu amplifier or head unit to send only low frequencies to the subwoofer. A typical LPF setting for an 8-inch subwoofer might be between 60Hz and 100Hz, depending on your system and preferences.
- Filtro subsónico: Se o teu amplifier has a subsonic filter, enable it and set it slightly below your enclosure's tuning frequency (for vented enclosures) or around 25-30Hz (for sealed enclosures) to protect the subwoofer from over-excursion at very low frequencies.
- Control de volume: Avoid prolonged listening at maximum volume levels, especially if you notice any distortion. Distortion indicates that the amplifier or subwoofer is being overdriven.
7. Mantemento
The Gladen RS-X-08 subwoofer requires minimal maintenance:
- Keep the subwoofer clean and free from dust and debris. Use a soft, dry cloth for cleaning.
- Comprobe periodicamente todas as conexións do cableado para asegurarse de que estean seguras e libres de corrosión.
- Avoid spilling liquids on the subwoofer.
- Do not apply excessive pressure to the cone or surround.
8 Solución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| Non hai son do subwoofer |
|
|
| Son distorsionado |
|
|
| Baixos débiles ou turbios |
|
|
9. Garantía e soporte
Gladen products are manufactured to the highest quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or contact your authorized Gladen dealer. Keep your proof of purchase for warranty claims.
For technical support or service inquiries, please contact your local Gladen distributor or visit the official Gladen websitio para información de contacto.
Websitio: www.gladen.com
