Introdución
Thank you for choosing KICKER PS5250 Motorcycle Speakers. These 5.25-inch coaxial speakers are specifically designed for Harley-Davidson motorcycles, offering a durable, waterproof solution for high-quality audio on the road. This manual provides essential information for installation, operation, and maintenance to ensure optimal performance and longevity of your speakers.
Información de seguridade
- Instalación profesional recomendada: For best results and to avoid damage, professional installation is highly recommended.
- Manexo de potencia: Do not exceed the maximum power handling of 100 Watts to prevent speaker damage.
- Cableado: Ensure all wiring is correctly connected according to the impedance (2 Ohm) and polarity to prevent damage to the speakers or ampmáis vivo.
- Clasificación impermeable: While these speakers are waterproof, avoid submerging them or exposing them to high-pressure water jets.
- Temperatura de funcionamento: Avoid operating the speakers in extreme temperatures outside of typical motorcycle operating conditions.
Contido do paquete
Verifica que todos os elementos estean presentes no teu paquete:
- KICKER 10PS5250 5.25-inch Coaxial Speakers (Pair)
- Specific replacement grilles for Harley-Davidson’s “Bat-wing” fairing
- Weather-proof materials

Image: The KICKER 10PS5250 speakers shown with their included grilles, ready for installation.
Guía de instalación
Ferramentas necesarias
- Xogo de desaparafusadores (Phillips e de punta plana)
- Pelacables/crimpadores
- Socket wrench set (if fairing removal is needed)
- Cinta illante ou tubo termorretráctil
- Multimeter (optional, for checking polarity)
Instrucións de montaxe
- Preparar a motocicleta: Ensure the motorcycle is turned off and the battery is disconnected before beginning any electrical work.
- Eliminar altofalantes existentes: Carefully remove the existing speakers from your Harley-Davidson’s fairing. This may involve removing the fairing itself, depending on your motorcycle model.
- Install New Speakers: Place the KICKER PS5250 speakers into the speaker openings. These speakers are designed to fit Harley-Davidson’s “Bat-wing” fairing. Ensure the speaker is seated correctly and securely.
- Secure with Grilles: Attach the provided specific replacement grilles over the speakers. Use the appropriate screws to secure the grilles and speakers to the fairing. Do not overtighten.

Imaxe: Fronte angulada view of the KICKER 10PS5250 speaker, highlighting its design for fairing installation.
Diagrama de cableado
The KICKER PS5250 speakers have a 2 Ohm impedance. Connect the speaker wires from your amplifier or head unit to the corresponding terminals on the speaker. Ensure correct polarity (positive to positive, negative to negative) to avoid phase issues and ensure optimal sound quality.
- Positive (+) Terminal: Typically marked with a red indicator or a plus sign.
- Negative (-) Terminal: Typically marked with a black indicator or a minus sign.

Imaxe: Traseira view of the KICKER 10PS5250 speaker, showing the wiring terminals for connection to an audio system.
Operación
Once installed and wired correctly, your KICKER PS5250 speakers will operate as part of your motorcycle's audio system. Ensure your audio source (head unit, amplifier) is compatible with 2 Ohm speakers.
- Encendido: Turn on your motorcycle's ignition and audio system.
- Control de volume: Adjust the volume from your head unit. Start at a low volume and gradually increase to a comfortable listening level.
- Configuración de audio: Utilize your head unit's equalizer or tone controls to fine-tune the sound to your preference. Avoid excessive bass or treble boost at high volumes to prevent distortion or damage.
Coidados e Mantemento
- Limpeza: Clean the speaker grilles and surrounding areas with a soft, damp pano. Evite o uso de produtos químicos agresivos ou produtos de limpeza abrasivos.
- Exposición á auga: While waterproof, it is advisable to wipe down the speakers after heavy rain or washing to prevent water spots and maintain appearance.
- Inspección: Periodically check the speaker mounting screws and wiring connections to ensure they remain secure.
- Almacenamento: If storing the motorcycle for an extended period, ensure the speakers are clean and dry.
Resolución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| Non hai son dos altofalantes | Cableado solto ou incorrecto; Amplifier/head unit off or faulty; Speaker damaged | Check all wiring connections for security and correct polarity. Ensure ampO altofalante/unidade principal está acendido e funciona. Proba con outro altofalante que saiba que funciona correctamente se é posible. |
| Son distorsionado | Volume demasiado alto; Amplifier clipping; Incorrect audio settings; Damaged speaker | Baixar o volume. Comprobar amplifier gain settings. Adjust equalizer/tone controls. Inspect speaker cone for physical damage. |
| Son intermitente | Loose wiring connection; Faulty speaker wire | Inspect all wiring for loose connections or frayed wires. Replace speaker wire if damaged. |
| Un altofalante non funciona | Wiring issue to that speaker; Speaker damaged | Check wiring specific to the non-working speaker. Swap speakers (if possible) to determine if the issue is with the speaker or the wiring/source. |
Especificacións técnicas
| Característica | Especificación |
|---|---|
| Nome do modelo | PS5250 |
| Tipo de altofalante | Coaxial |
| Característica especial | Impermeable |
| Usos recomendados para o produto | Ao aire libre |
| Número de unidades | 1.0 unidades (por altofalante) |
| Configuración da canle de son envolvente | 2.0 |
| Peso do elemento | 12 onzas |
| Impedancia | 2 ohmios |
| É Impermeable | VERDADEIRO |
| Número de elementos | 1 (por falante) |
| Tamaño do altofalante | 5.25 polgadas |
| Fonte de enerxía | Eléctrico con cable |
| Diámetro do woofer | 5.25 polgadas |
| Diámetro do tweeter | 20 milímetros |
| Tipo de servizo do vehículo | Motocicleta |
| Nivel de resistencia á auga | Impermeable |
| Tipo de controlador de audio | Driver dinámico |
| Tamaño do controlador de audio | 5.25 polgadas |
| Protocolo de conectividade | Coaxial |
| Fabricante | Pateador |
| Dimensións do produto | 15 x 7 x 11 polgadas |
| Potencia de saída máxima do altofalante | 100 vatios |
| Tecnoloxía de conectividade | Coaxial |
| Modo de saída de audio | Estéreo |
| Tipo de montaxe | Soporte para motocicleta |
Garantía e Atención ao Cliente
KICKER products are designed for durability and performance. These speakers come with a Limited Warranty. Please refer to the warranty card included with your purchase for specific terms and conditions, including coverage duration and what is covered.
For technical support, troubleshooting assistance, or warranty claims, please contact KICKER customer support directly. You can find contact information on the official KICKER websitio web ou a través do seu distribuidor autorizado.
KICKER Official Websitio: www.kicker.com





