Introdución
This manual provides detailed instructions for the installation, operation, and maintenance of your Kwikset CL101105 Standard Duty Commercial Passage Lever. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product. This passage lever is designed for light to medium traffic flow areas and is suitable for hallway or closet doors where no locking mechanism is required.
Image: Kwikset CL101105 Standard Duty Commercial Passage Lever. This image displays the complete lever assembly, including the cylindrical chassis, the passage lever handle, and the latch mechanism, all in a satin chrome finish.
Información de seguridade
- Always wear appropriate safety gear, such as gloves and eye protection, during installation.
- Asegúrese de que todos os compoñentes estean ben fixados antes do uso.
- Do not modify the product in any way, as this may void the warranty and compromise safety.
- Manteña as pezas pequenas lonxe dos nenos.
O que hai na caixa
Comprobe que todos os compoñentes estean presentes antes de comezar a instalación:
- Lever Handles (2)
- Cylindrical Chassis
- Mecanismo de bloqueo
- Placa de folga
- Parafusos de montaxe
Configuración e instalación
This section outlines the steps for installing the Kwikset CL101105 Passage Lever. Ensure your door is prepared with standard bore holes (typically 2-1/8 inches for the main bore and 1 inch for the latch bore) and a backset of 2-3/8 inches or 2-3/4 inches.
Ferramentas necesarias:
- Destornillador Phillips
- Cinta métrica
- Lapis
- Chisel (optional, for strike plate mortise)
Pasos de instalación:
- Prepara a porta: Ensure the door has the correct bore holes and backset. The backset is the distance from the edge of the door to the center of the main bore hole. This lever supports adjustable backsets of 2-3/8 inches to 2-3/4 inches.
- Instalar o pestillo: Insert the latch mechanism into the edge bore hole of the door. Ensure the bevel of the latch bolt faces the door frame. Secure it with the provided screws.
- Install the Exterior Lever Assembly: Place the exterior lever assembly through the main bore hole, ensuring the spindle engages with the latch mechanism.
- Install the Interior Lever Assembly: Align the interior lever assembly with the exterior assembly and the spindle. Secure both assemblies together using the through-bolts or mounting screws. The through-bolt can be removed for easier installation if preferred.
- Instalar a placa de peche: Mark the position of the latch bolt on the door frame. Chisel out a shallow mortise if necessary, and then secure the strike plate to the door frame with screws.
- Proba de funcionamento: Close the door and test the lever operation. The lever should retract the latch bolt smoothly.
Instrucións de funcionamento
The Kwikset CL101105 is a passage lever, meaning it does not have a locking function. It is designed for doors that require a latching mechanism but no security.
- To open the door, simply depress the lever handle. This will retract the latch bolt, allowing the door to open.
- To close the door, push the door shut. The latch bolt will automatically retract and extend as it meets the strike plate, securing the door in the closed position.
Mantemento
Regular maintenance ensures the smooth operation and extends the lifespan of your passage lever.
- Limpeza: Clean the lever with a soft, damp pano. Evite produtos de limpeza abrasivos, solventes ou produtos químicos agresivos, xa que poden danar o acabado.
- Lubricación: Periodically apply a small amount of silicone-based lubricant to the latch bolt and internal mechanisms if operation becomes stiff. Do not use oil-based lubricants, as they can attract dust and debris.
- Parafusos de apriete: Check and tighten all mounting screws periodically to ensure the lever remains securely attached to the door.
Resolución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| Lever is stiff or hard to turn. | Acumulación de sucidade ou falta de lubricación. | Clean the lever and apply a silicone-based lubricant to the latch bolt and internal mechanisms. |
| O pestillo de retención non se retrae completamente. | Misalignment of components or debris. | Check for obstructions. Ensure the lever assemblies are properly aligned and screws are tightened. Re-lubricate if necessary. |
| Lever feels loose on the door. | Os parafusos de montaxe están soltos. | Aperte firmemente todos os parafusos de montaxe. |
| A porta non pecha correctamente. | Strike plate misalignment or incorrect backset. | Adjust the strike plate position on the door frame. Verify the backset setting during installation. |
Especificacións
- Modelo: CL101105
- Marca: Kwikset
- Tipo: Standard Duty Commercial Passage Lever
- ANSI Rating: A156.2 Grade 2 (Tested to over 400,000 cycles)
- Clasificación UL: 3 Hour (Suitable for fire doors)
- Conformidade ADA: Si
- Retroceso: Adjustable 2-3/8 inches to 2-3/4 inches
- Material: Cylindrical Steel Coated with Zinc Dichromate (Corrosion Resistance)
- Remate: Chrome
- Dimensións do produto: 7.76 x 9.02 x 4.37 polgadas
- Peso: 2 libras
Información da garantía
This Kwikset CL101105 Standard Duty Commercial Passage Lever comes with a limited lifetime warranty. For specific details regarding warranty coverage, terms, and conditions, please refer to the warranty card included with your product or visit the official Kwikset websitio.
Atención ao cliente
If you encounter any issues or have questions regarding your Kwikset CL101105 Passage Lever, please contact Kwikset customer support. Contact information can typically be found on the product packaging or the official Kwikset websitio.
Para máis información, visite o Kwikset Store on Amazon.
