Chevron Cetus PAO 46 Air Compressor Oil Lubricant Instruction Manual

1. Introdución

This manual provides essential instructions for the safe and effective use, storage, and handling of Chevron Cetus PAO 46, a premium synthetic air compressor oil lubricant. Cetus PAO 46 is designed to deliver superior performance in various air compressor applications, offering extended drain intervals and protection against wear, rust, and oxidation.

Lea este manual detidamente antes de usar o produto para garantir un rendemento e unha seguridade óptimos.

2. Información de seguridade

Handling industrial lubricants requires adherence to safety protocols. Always consult the Safety Data Sheet (SDS) for comprehensive safety information specific to Chevron Cetus PAO 46. The SDS provides details on potential hazards, first aid measures, fire-fighting procedures, accidental release measures, handling and storage, exposure controls, and personal protection.

Equipos de protección individual (EPI): Always wear appropriate PPE, including safety glasses or goggles, chemical-resistant gloves, and protective clothing, when handling the lubricant.
Ventilación: Ensure adequate ventilation in areas where the lubricant is handled or stored.
Contacto coa pel: Avoid prolonged or repeated skin contact. Wash thoroughly with soap and water after handling.
Contacto cos ollos: In case of contact, flush eyes immediately with large amounts of water for at least 15 minutes. Seek medical attention if irritation persists.
Inxestión: Non inxerir. En caso de inxestión, non provocar o vómito. Consultar inmediatamente a un médico.
Riscos de incendio: This product is combustible. Keep away from open flames, sparks, and hot surfaces. Use appropriate fire extinguishers (e.g., foam, dry chemical, CO2).

3. Almacenamento e manipulación

Proper storage and handling are crucial for maintaining product quality and ensuring safety.

Image 1: A 55-gallon drum containing Chevron Cetus PAO 46 lubricant. The drum is blue with the Chevron brand logo in the center, indicating the product's origin and type.

Condicións de almacenamento: Store the 55-gallon drum in a cool, dry, well-ventilated area, away from direct sunlight, heat sources, and incompatible materials.
Container Integrity: Keep the drum tightly closed when not in use to prevent contamination and evaporation.
Prevención de vertidos: Store drums on secondary containment pallets to prevent environmental contamination in case of leaks or spills.
Levantar e mover: Use appropriate lifting equipment (e.g., drum dollies, forklifts) when moving the 55-gallon drum to prevent injury and damage.
Etiquetado: Ensure all containers are clearly labeled with product identification and hazard warnings.

4. Configuración e preparación

Before introducing Chevron Cetus PAO 46 into an air compressor system, proper preparation is essential.

Review Compressor Manual: Always refer to the air compressor manufacturer's instruction manual for specific lubricant requirements and change procedures.
Apagado do sistema: Ensure the air compressor is completely shut down, depressurized, and locked out/tagged out to prevent accidental startup.
Drain Old Lubricant: Completely drain the existing lubricant from the compressor system, including the sump, oil cooler, and separator. Dispose of used oil according to local regulations.
Substitución do filtro: Replace all oil filters and air/oil separators as recommended by the compressor manufacturer.
System Flush (if necessary): If switching from a different type of lubricant (e.g., mineral oil to synthetic), a system flush may be required to prevent incompatibility issues. Consult Chevron technical support or the compressor manufacturer for guidance.

5. Operating (Lubricant Application)

Follow these steps for filling the air compressor with Chevron Cetus PAO 46.

Fill Compressor: Carefully pour Chevron Cetus PAO 46 into the compressor's oil fill port, using a clean funnel to prevent contamination.
Nivel de verificación: Fill to the recommended level indicated by the compressor's sight glass or dipstick. Do not overfill.
Execución inicial: Start the compressor and allow it to run for a short period (e.g., 15-30 minutes) to circulate the new lubricant.
Re-check Level: Shut down the compressor, allow the oil to settle, and re-check the lubricant level. Top up if necessary.
Monitor de rendemento: During initial operation, monitor the compressor for any unusual noises, temperatures, or pressure readings.

6. Mantemento

Regular maintenance ensures the longevity and efficiency of your air compressor and the lubricant.

Lubricant Analysis: Periodically conduct oil analysis to monitor the condition of the lubricant and the compressor. This can help determine optimal drain intervals and detect potential issues early.
Drain Intervals: Chevron Cetus PAO 46 offers extended drain intervals compared to conventional mineral oils. Follow the compressor manufacturer's recommendations or adjust based on oil analysis results.
Filter Changes: Adhere to the compressor manufacturer's schedule for replacing oil filters and air/oil separators.
Limpeza do sistema: Maintain a clean operating environment to prevent contaminants from entering the lubricant system.

7 Solución de problemas

This section addresses common issues related to air compressor lubrication.

Problema	Causa posible	Solución
High Operating Temperature	Low oil level, clogged oil cooler, incorrect lubricant viscosity, contaminated lubricant.	Check oil level and top up. Clean oil cooler. Verify correct lubricant. Perform oil analysis and change if contaminated.
Consumo excesivo de aceite	Worn seals, damaged air/oil separator, overfilling.	Inspect and replace seals. Check and replace air/oil separator. Ensure correct oil level.
Short Lubricant Life	High operating temperatures, contamination, incompatible lubricant mixture.	Address temperature issues. Prevent contamination. Ensure system is flushed if switching lubricant types.

For issues not listed, consult your compressor manufacturer's manual or contact Chevron technical support.

8. Especificacións

Key specifications for Chevron Cetus PAO 46 lubricant.

Marca: Chevron
Nome do produto: Cetus PAO 46
Material: Sintético
Volume de líquido: 55 Gallons (7040.0 Fluid Ounces)
Usos recomendados: Lubricant for Air Compressors
Usos específicos: Lubricate Air Compressors, Prevent Corrosion
Forma do elemento: Aceite
SAE J300 Viscosity Grade: 50
UPC: 023968381431

9. Información de eliminación

Used lubricants must be disposed of responsibly and in accordance with all local, state, and federal environmental regulations. Do not discharge into drains, soil, or watercourses. Contact a licensed waste management company for proper disposal or recycling of used oil and contaminated materials.

10. Garantía e soporte

For specific warranty information regarding Chevron Cetus PAO 46, please refer to the official Chevron product documentation or contact Chevron customer service directly. Technical support and further assistance can be obtained through authorized Chevron distributors or by visiting the official Chevron websitio.

Note: This manual provides general guidelines. Always prioritize the safety data sheet (SDS) and specific equipment manufacturer's recommendations.

	Delo Syn-TDL SAE 75W-90 Safety Data Sheet \| Chevron Safety Data Sheet for Delo Syn-TDL SAE 75W-90, providing comprehensive information on identification, hazards, composition, first aid, fire-fighting, handling, storage, exposure controls, physical and chemical properties, toxicological and ecological information, disposal, transport, and regulatory information.
	Ficha de datos de seguridade de Chevron Delo 400 SDE SAE 10W-30 Ficha de datos de seguridade para o aceite de motor para servizo pesado Chevron Delo 400 SDE SAE 10W-30, que detalla a identificación do produto, os perigos, a composición, os primeiros auxilios, a loita contra incendios, a manipulación, o almacenamento, os controis de exposición, as propiedades físicas, a estabilidade, a toxicoloxía, a información ecolóxica, a eliminación, o transporte e a información regulamentaria.
	Chevron Delo 400 SDE SAE 10W-30 Safety Data Sheet (SDS) Comprehensive Safety Data Sheet (SDS) for Chevron Delo 400 SDE SAE 10W-30 heavy duty motor oil, detailing product identification, hazards, composition, first aid, fire fighting, handling, storage, exposure controls, physical properties, stability, toxicology, ecology, disposal, transport, and regulatory information.
	Chevron Delo 400 SD SAE 15W-30 Premium Diesel Engine Oil Chevron Delo 400 SD SAE 15W-30 is a premium, innovative diesel engine oil designed for severe duty applications. It offers exceptional oxidation and deposit control, improved fuel economy, extended emission control system life, and managed inventory costs. Suitable for a wide range of diesel and gasoline engines, it meets stringent API CJ-4 standards and various OEM approvals.
	Techron Concentrate Plus Fuel Additive - Safety and Usage Information Comprehensive safety warnings, chemical composition, and clear usage instructions for Chevron's Techron Concentrate Plus fuel additive. Learn how to safely and effectively use this product to maintain your vehicle's fuel system.
	Interruptor de nivel de aceite HB Products HBSO: Manual de instrucións e datos técnicos Manual de instrucións completo e especificacións técnicas para os interruptores de nivel de aceite HB Products HBSO1 e HBSO2. Coñece o principio de medición capacitiva, o deseño, a instalación, o funcionamento e as pezas de reposto para sistemas de refrixeración.