AIMS Power 3600 Watt Modified Sine Power Inverter Instruction Manual

1. Introdución

The AIMS Power 3600 Watt Modified Sine Power Inverter converts 12 Volt DC battery power to 120 Volt AC household power. This unit is ETL Listed and conforms to UL 458 Standards, as well as CSA Standard C22.2 No. 107.1-01 in Canada. It is designed for various applications including mobile power, backup systems, or off-grid power solutions in homes, RVs, cabins, boats, and vehicles.

Key features include 3600W continuous power and 7200W surge capability, dual GFCI outlets, and an AC direct connect terminal block for full wattage delivery. The inverter incorporates soft start technology and comprehensive protections against overload, over temperature, high/low voltage, and short circuits. Integrated volt and amp meters allow for performance monitoring, complemented by LED indicators for power and fault conditions.

2. Instrucións de seguridade importantes

ADVERTENCIA: O incumprimento destas instrucións pode provocar lesións graves ou danos materiais.

• Ventilación: Ensure the inverter is installed in a well-ventilated area to prevent overheating. Do not block ventilation openings.
• Humidade: Do not expose the inverter to rain, snow, spray, or bilge water. Do not install in a wet environment.
• Materiais inflamables: Do not install the inverter in compartments containing flammable materials or where flammable fumes may accumulate.
• Conexións de batería: Always connect the inverter to a 12V DC battery system. Ensure correct polarity (red to positive, black to negative) to avoid damage. Use appropriate gauge cables for connections.
• Conexión a terra: The inverter must be properly grounded. Connect the grounding terminal to a suitable earth ground.
• Persoal cualificado: Installation and servicing should be performed by qualified personnel familiar with electrical systems and safety procedures.
• Nenos: Keep the inverter and all associated wiring out of reach of children.

3. Contido do paquete

Your AIMS Power 3600 Watt Modified Sine Power Inverter package includes the following items:

• AIMS Power 3600 Watt Modified Sine Power Inverter
• Manual de instrucións
• DC Battery Terminal Covers (Red and Black)

4. Características e compoñentes do produto

The AIMS Power 3600 Watt Modified Sine Power Inverter is engineered for robust performance and user convenience. Below are its primary features and components:

• Potencia de saída: 3600W maximum continuous power, 7200W surge capability, with soft start technology.
• Tomas de CA: Dual 20 Amp GFCI (Ground Fault Circuit Interrupter) outlets for enhanced safety.
• AC Terminal Block: Direct connect AC terminal block capable of delivering the full 3600 watts to a single source.
• Entrada CC: Rugged DC terminals for secure battery connections.
• Características de protección: Overload, over temperature, high voltage, baixo voltage, short circuit, internally fused, low and high voltage alarm, cooling fan, and isolated ground neutral.
• Seguimento: Integrated Volt and Amp meters to monitor inverter performance. LED indicators for power and fault conditions.
• Interruptor de frecuencia: A switch to select between 50Hz and 60Hz output, if needed.
• Porto remoto: Dedicated port for an optional remote switch (adapter cable included).

Figura 4.1: global view of the AIMS Power 3600 Watt Modified Sine Power Inverter.

Figure 4.2: Front panel showing AC outlets, terminal block, and controls.

Figure 4.3: Rear panel displaying the DC input terminals and cooling fans.

Figura 4.4: detallada view of the dual GFCI outlets and the AC direct connect terminal block.

Figura 4.5: detallada view of the DC input terminals with protective covers.

5. Configuración e instalación

Unha instalación axeitada é crucial para o funcionamento seguro e eficiente do inversor. Siga estes pasos atentamente:

5.1 Elixir unha localización

• Install the inverter in a dry, well-ventilated area, away from direct sunlight, heat sources, and moisture.
• Ensure adequate clearance around the inverter for proper airflow to the cooling fans.
• Monte o inversor de forma segura sobre unha superficie estable e non inflamable.

5.2 DC Input Connection (Battery)

1. Asegúrese de que o interruptor de alimentación do inversor estea na posición de apagado.
2. Connect the supplied DC battery terminal covers to the appropriate terminals on the inverter: red to positive (+), black to negative (-).
3. Connect the other end of the DC cables to your 12V DC battery bank, ensuring correct polarity. Use heavy-gauge cables suitable for the inverter's wattage.
4. Tighten all connections securely to prevent loose connections, which can cause overheating and damage.

5.3 Conexión de saída de CA

• Saídas GFCI: For standard AC appliances, plug them directly into the dual 20A GFCI outlets on the front panel.
• AC Terminal Block: For applications requiring the full 3600W or a hardwired connection, use the AC direct connect terminal block. Consult a qualified electrician for proper wiring to this block. Ensure all wiring adheres to local electrical codes.

5.4 Remote Switch Connection (Optional)

If using an optional remote switch, connect its cable to the dedicated remote port on the inverter's front panel. An adapter cable is included for this purpose.

6. Instrucións de funcionamento

Once the inverter is properly installed and connected, follow these steps for operation:

6.1 Acendido/Apagado

1. Ensure all AC loads are disconnected or turned off before powering on the inverter.
2. Flip the main power switch on the inverter to the "ON" position. The green LED indicator should illuminate, and the volt/amp meters will display readings.
3. If using a remote switch, ensure the inverter's main switch is ON, then use the remote switch to control the inverter's power.
4. To power off, first disconnect or turn off all AC loads, then flip the inverter's main power switch to "OFF."

6.2 Monitorización do rendemento

• The integrated volt and amp meters provide real-time feedback on your system's performance. Monitor these displays to ensure stable operation and prevent overloading.
• LED indicators will show green for normal operation and red for fault conditions (e.g., overload, over temperature).

6.3 Selección de frecuencia

A switch is provided on the unit to change the output frequency between 50Hz and 60Hz. Adjust this setting according to the requirements of your connected appliances.

7. Mantemento

Regular maintenance ensures the longevity and optimal performance of your AIMS Power Inverter:

• Limpeza: Limpa periodicamente o exterior do inversor cun pano seco. Asegúrate de que as aberturas de ventilación estean libres de po e residuos. Non empregues produtos de limpeza líquidos.
• Comprobacións de conexión: Regularly inspect all DC and AC connections for tightness. Loose connections can lead to power loss, overheating, and potential fire hazards.
• Saúde da batería: Monitor your battery bank's health and charge level. A healthy battery system is essential for inverter performance.
• Almacenamento: If storing the inverter for an extended period, ensure it is disconnected from all power sources and stored in a cool, dry place.

8 Solución de problemas

Se tes problemas co teu inversor, consulta os seguintes problemas e solucións comúns:

9. Especificacións

10. Garantía e soporte

AIMS Power stands behind its products. This inverter comes with a 2 ano de garantía. All technical support, warranty claims, and sales inquiries are handled directly from our support center in Nevada, USA. For assistance, please refer to the contact information provided in your product packaging or visit the official AIMS Power websitio.