Introdución
This manual provides essential information for the safe and proper installation and use of your One For All TV Bracket WM4411. This fixed wall mount is designed for televisions with screen sizes from 32 to 60 inches and is compatible with various VESA mounting patterns. Please read all instructions carefully before beginning installation.
Información de seguridade
- Always read and understand all instructions before installation. If you have any doubts, consult a qualified professional.
- Asegúrate de que a estrutura da parede poida soportar con seguridade o peso combinado do soporte e do televisor.
- Do not exceed the maximum weight capacity of 1000kgs (2200 lbs) for this mount.
- Use only the provided mounting hardware or appropriate alternatives for your specific wall type.
- Keep all small parts and packaging materials out of reach of children.
- Use equipamento de seguridade axeitado, como protección ocular, durante a instalación.
Contido do paquete
Comprobe que todos os compoñentes estean presentes antes de comezar a instalación:
- Wall Mount Assembly (Wall Plate and TV Brackets)
- Mounting Kit (various screws, washers, spacers, concrete anchors)
- Manual de instrucións
Note: Specific quantities of fasteners may vary. Refer to the detailed parts list in your physical manual for exact counts.
Configuración (Guía de instalación)
The One For All Toolbox App is available for easy setup and provides additional installation tools.
An image showing the black metal frame of the One For All WM4411 fixed TV wall mount, designed to securely hold televisions against a wall. It features a rectangular wall plate with multiple mounting holes and two vertical TV brackets with various VESA-compatible holes.
- Prepara o muro:
- Locate suitable mounting points (wood studs for drywall, solid concrete/brick).
- Use a stud finder to confirm stud locations if mounting to drywall.
- Mark the desired height and center of your TV on the wall.
- Montar a placa de parede:
- Hold the wall plate against the wall at the marked location and use a spirit level to ensure it is perfectly horizontal.
- Marque os puntos de perforación a través dos orificios da placa de parede.
- Drill pilot holes according to the recommended drill bit size for your wall type and chosen fasteners.
- Fixa a placa de parede á parede cos parafusos e ancoraxes axeitados. Asegúrate de que estea firmemente fixada.
- Coloque os soportes ao televisor:
- Coloque con coidado o televisor boca abaixo sobre unha superficie suave e limpa.
- Identifique os orificios de montaxe VESA na parte traseira do televisor.
- Select the correct size screws, washers, and spacers from the mounting kit that fit your TV's VESA pattern (e.g., 100x100, 200x200, 400x400).
- Attach the two vertical TV brackets to the back of your TV, ensuring they are oriented correctly and securely tightened.
- Montar o televisor na placa de parede:
- Con axuda, levante con coidado o televisor cos soportes instalados.
- Enganche os soportes do televisor na beira superior da placa de parede.
- Baixa o televisor con coidado ata que os soportes encaixen completamente na placa de parede.
- Asegurar o televisor:
- Locate the safety screws or locking mechanisms at the bottom of the TV brackets.
- Tighten these screws or engage the locking mechanisms to secure the TV to the wall plate and prevent accidental dislodgement.
En funcionamento
Once installed, the One For All WM4411 is a fixed wall mount, meaning it holds your TV securely in a static position close to the wall. There are no moving parts for adjustment. Ensure the TV is properly seated and secured to the wall plate as per the installation instructions.
Mantemento
- Limpeza: Usa un pano suave e seco para limpar o soporte. Evita produtos de limpeza ou solventes abrasivos.
- Comprobacións periódicas: Periodically inspect all screws and connections to ensure they remain tight and secure. Over time, vibrations or minor shifts can loosen fasteners.
- Danos: If any part of the mount appears damaged or worn, do not use it. Contact customer support for assistance.
Resolución de problemas
O televisor non está nivelado despois da instalación:
Ensure you used a reliable spirit level during the wall plate mounting step. If the TV is slightly off, you may need to adjust the wall plate or re-drill if necessary. Do not rely solely on included spirit levels; cross-reference with a trusted tool.
Mount feels loose on the wall:
This indicates improper installation. Immediately remove the TV. Re-check your wall type and ensure you used the correct anchors and fasteners. Verify that all screws are fully tightened into solid structural elements (studs, concrete). If unsure, consult a professional installer.
Missing parts from the mounting kit:
Contact One For All customer support or the retailer where you purchased the product to request replacement parts.
Especificacións
| Característica | Detalle |
|---|---|
| Número de modelo | WM4411 |
| Tamaños de pantalla compatibles | 32 - 60 polgadas |
| Compatibilidade VESA | 100x100, 200x100, 200x200, 300x200, 300x300, 400x200, 400x300, 400x400 |
| Capacidade máxima de peso | 1000 kg (2200 lb) |
| Tipo de montaxe | Montaxe de parede fixa |
| Dimensións do produto | 17.13 x 0.98 x 18.86 polgadas |
| Peso do elemento | 2.33 libras |
| Material | Plastic (Note: Main structure is metal, plastic refers to specific components) |
Garantía e Soporte
For warranty information and technical support, please refer to the official One For All website or contact their customer service directly. You can also utilize the One For All Toolbox App for additional assistance and resources.
Visita o One For All Store para máis produtos e información.
