Introdución
The BRESSER Temeo Quadro Temperature Station is designed to monitor temperature and humidity at up to four different locations simultaneously. This system includes a main display unit and three remote sensors, allowing you to track environmental conditions both indoors and outdoors, or in various rooms of your home. The remote sensors transmit data wirelessly to the main unit via a 433 MHz radio signal.
Información de seguridade
- Lea atentamente todas as instrucións antes de usar o dispositivo.
- Conserve este manual para futuras consultas.
- Non expoñas o dispositivo a temperaturas extremas, luz solar directa nin humidade elevada.
- Evite deixar caer ou someter o dispositivo a fortes impactos.
- Non intente desmontar nin reparar o dispositivo vostede mesmo. Póñase en contacto co persoal de servizo cualificado.
- Elimina as baterías usadas de forma responsable segundo a normativa local.
Contido do paquete
- 1x BRESSER Temeo Quadro Main Display Unit
- 3x Remote Sensors
- 1x Manual de usuario (este documento)
Note: Batteries are not included. The main unit requires 3x AAA (LR03) batteries, and each remote sensor requires 2x AAA (LR03) batteries.
Produto rematadoview
Unidade de visualización principal
Imaxe: Fronte view of the BRESSER Temeo Quadro main unit display. A clear view of the main unit's LCD screen, showing temperature and humidity values for four channels.
Imaxe: Traseira view of the BRESSER Temeo Quadro main unit, showing control buttons and battery compartment. The back of the main unit includes buttons for 'CHANNEL', 'ALARM', 'MAX/MIN', and 'SET', along with the battery compartment cover.
- Pantalla LCD: Shows temperature and humidity for the main unit (IN) and up to three remote sensors (1, 2, 3).
- Botón CANAL: Selects which remote sensor's data is displayed or cycles through channels.
- Botón ALARMA: Activates/deactivates temperature/humidity alarms.
- Botón MAX/MIN: Displays maximum and minimum recorded values.
- Botón SET: Enters setup mode for time, date, and alarm settings.
- Compartimento de batería: Located on the rear, for 3x AAA batteries.
- Soporte integrado: Para colocación sobre escritorio.
Sensor remoto
Imaxe: BRESSER Temeo Quadro remote sensor, front and back views. A remote sensor unit, showing its display on the front and the battery compartment and mounting hole on the back.
- Pantalla LCD: Shows its current temperature and humidity.
- Cambio de canle: Allows selection of channel 1, 2, or 3.
- Compartimento de batería: Para 2 pilas AAA.
- Orificio de montaxe: Para montaxe en parede.
Configuración
1. Instalación da batería
- Para sensores remotos:
- Open the battery compartment cover on the back of each remote sensor.
- Insert 2x AAA (LR03) batteries into each sensor, observing the correct polarity (+/-).
- Set the channel switch (1, 2, or 3) on each sensor to a unique channel.
- Pecha a tapa do compartimento da batería.
- For Main Display Unit:
- Abra a tapa do compartimento das baterías na parte traseira da unidade principal.
- Insert 3x AAA (LR03) batteries, observing the correct polarity (+/-).
- Close the battery compartment cover. The main unit will power on and begin searching for sensor signals.
2. Emparellamento de sensores
- After installing batteries in both the sensors and the main unit, the main unit will automatically attempt to connect with the remote sensors.
- Ensure the remote sensors are within range (typically up to 30 meters in open air) of the main unit during initial setup.
- The corresponding channel numbers (1, 2, 3) on the main unit's display will show readings once a connection is established. The 'IN' channel displays the main unit's internal readings.
- If a sensor does not connect, remove and reinsert its batteries, then press the 'CHANNEL' button on the main unit to initiate a new search.
3 Colocación
- Place the main unit indoors in a central location, away from direct sunlight or heat sources.
- Position remote sensors in desired monitoring areas. For outdoor use, place sensors in a sheltered spot to protect them from direct rain and sun, which can affect accuracy and device longevity.
Instrucións de funcionamento
Viewing Temperatura e humidade
- The main display unit continuously shows the current temperature and humidity for the internal sensor ('IN') and the three remote sensors (1, 2, 3).
- The display also indicates comfort levels (e.g., 'COM' for comfortable, 'DRY' for dry, 'WET' for wet) based on humidity levels.
MAX/MIN Records
- Preme o MAX/MIN button once to display the maximum temperature and humidity recorded since the last reset.
- Preme o MAX/MIN button a second time to display the minimum temperature and humidity recorded.
- Para borrar os rexistros MÁX/MÍN, manteña premido o botón MAX/MIN durante aproximadamente 3 segundos mentres se mostran os valores MAX ou MIN.
Selección da unidade de temperatura (°C/°F)
- On the main unit, press the SET button to toggle between Celsius (°C) and Fahrenheit (°F).
Setting Alarms (if applicable)
- Preme o ALARMA botón para entrar no modo de configuración da alarma.
- Usa o CANLE e MAX/MIN buttons to adjust the desired high and low temperature/humidity alarm thresholds for each channel.
- Preme ALARMA again to confirm settings and activate the alarm. An alarm icon will appear on the display.
- When an alarm threshold is met, the unit will emit an audible alert and the corresponding channel's reading will flash.
Mantemento
- Limpeza: Limpe o dispositivo cun suave, damp pano. Non use produtos de limpeza ou disolventes abrasivos.
- Substitución da batería: Replace batteries when the low battery indicator appears on the display. Always replace all batteries in a unit at the same time.
- Almacenamento: Se garda o dispositivo durante un período prolongado, retire todas as baterías para evitar fugas.
Resolución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| Sen pantalla na unidade principal. | As pilas están gastadas ou inseridas incorrectamente. | Comprobe a polaridade das pilas e substitúaas por pilas AAA novas. |
| Remote sensor not displaying data on main unit. | Sensor out of range, incorrect channel setting, or dead batteries. |
|
| Lecturas inexactas. | Sensor exposto á luz solar directa, a fontes de calor ou á humidade. | Relocate sensors to a more appropriate, sheltered environment. Allow time for readings to stabilize. |
| Intermittent signal loss. | Interference from other electronic devices or physical obstructions. | Move the main unit or sensors away from potential sources of interference (e.g., TVs, microwaves, large metal objects). |
Especificacións
| Número de modelo | 7000020CM3000 |
| Marca | BRESSER |
| Dimensións do produto (unidade principal) | 1.02 x 4.13 x 4.72 polgadas (2.59 x 10.49 x 11.99 cm) |
| Item Weight (Main Unit) | 0.19 quilogramos (aprox. 6.7 onzas) |
| Temperature Range (Main Unit) | Internal sensor range not specified, but upper rating is 55 °C. |
| Precisión da temperatura | ±1 °C |
| Rango de humidade | Not specified, but typically 20% to 95% for similar devices. |
| Frecuencia sen fíos | 433 MHz |
| Fonte de alimentación (unidade principal) | 3x AAA (LR03) batteries |
| Fonte de alimentación (sensor remoto) | 2x AAA (LR03) batteries per sensor |
| Number of Remote Sensors Supported | 3 |
Garantía
This BRESSER product comes with a garantía de dous anos against factory defects from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by improper use, accidents, unauthorized repairs, or normal wear and tear.
Apoio
For technical support, warranty claims, or further information, please visit the official BRESSER website or contact their customer service department. Refer to the packaging or the BRESSER websitio web para obter os datos de contacto máis actuais.
Online resources may include FAQs, additional manuals, and contact forms.
