HobbyWing Quicrun 1060 Brushed ESC Instruction Manual

1. Produto rematadoview

The HobbyWing Quicrun 1060 Brushed Electronic Speed Controller (ESC) is engineered for 1/10 and 1/12 scale remote-controlled cars and trucks. This waterproof unit offers reliable performance and is designed for ease of use, featuring a Tamiya battery plug for broad compatibility. It supports various running modes and battery types, making it a versatile choice for brushed motor setups.

Figure 1: HobbyWing Quicrun 1060 Brushed ESC

2. Que hai na caixa

• Hobbywing speed control with Tamiya battery plug

3. Características clave

• 60 Amp Power: Provides robust power delivery for brushed motors.
• Waterproof Electronics: Ensures reliable operation in various environmental conditions.
• Multiple Running Modes: Supports Forward/Reverse/Brake, Forward/Brake, and Forward/Reverse modes.
• LiPo Cutoff Capability: Compatible with LiPo batteries up to 3S, with built-in low voltage cutoff protection.
• Integrated Tamiya Battery Plug: Simplifies connection to common RC battery packs.

Figure 2: Tamiya Logo, indicating compatible battery plug type.

4. Configuración e instalación

4.1 Conexións de cableado

1. Conexión do motor: Connect the ESC's motor wires (blue and yellow) to your brushed motor. The order may affect motor rotation; reverse if necessary.
2. Conexión da batería: Plug your battery pack into the ESC's Tamiya connector. Ensure correct polarity.
3. Conexión do receptor: Plug the ESC's signal cable (usually black, red, white/yellow) into the throttle channel (typically Channel 2) of your RC receiver.
4. Interruptor de alimentación: Mount the power switch in an accessible location on your vehicle.

4.2 Jumper Cap Settings

The Quicrun 1060 ESC uses jumper caps to configure various settings, including running mode, battery type, and BEC output voltage. Refer to the detailed chart in your physical user manual for specific configurations. Incorrect settings can damage the ESC or battery.

Key Jumper Settings:

• Modo de execución: Select between Forward/Reverse/Brake, Forward/Brake, or Forward/Reverse.
• Tipo de batería: Choose between NiMH or LiPo to ensure proper low voltage corte.
• Vol. de saída BECtage: Axuste o voltage supplied to your receiver and servos (e.g., 6.0V or 7.4V).

4.3 Calibración do acelerador

To ensure proper operation, the ESC must be calibrated to your transmitter's throttle range. Follow these general steps:

1. Turn on your transmitter and ensure all throttle trims are at neutral.
2. Conecte a batería ao ESC.
3. Hold the throttle stick at full throttle (highest position) and turn on the ESC.
4. The motor will emit a series of beeps. Once you hear the first beep, move the throttle stick to full brake (lowest position).
5. After another series of beeps, move the throttle stick to the neutral position.
6. The ESC will emit a final series of beeps, indicating successful calibration.

5. Modos de funcionamento

The Quicrun 1060 ESC offers three primary operating modes, configurable via jumper caps:

• Forward/Reverse/Brake Mode: Standard mode for general driving, allowing forward, reverse, and braking.
• Forward/Brake Mode: Ideal for racing, providing only forward movement and braking, with no reverse.
• Forward/Reverse Mode: Suitable for rock crawling or specific applications where immediate reverse is needed without a brake delay.

Consult your user manual's jumper cap chart for detailed instructions on how to select each mode.

6. Mantemento

• Limpeza: Regularly clean the ESC to remove dirt, dust, and debris. Use a soft brush or compressed air.
• Inspección: Periodically check all wires and connectors for signs of wear, damage, or loose connections.
• Almacenamento: Garde o ESC nun ambiente seco e fresco, lonxe da luz solar directa e de temperaturas extremas.

7 Solución de problemas

• Sen enerxía: Check battery connection, power switch, and ensure the battery is charged.
• O motor non responde: Verify receiver connection, throttle calibration, and motor wiring.
• Operación errática: Re-calibrate the throttle range. Check for interference or loose connections.
• Sobrequecemento: Ensure proper ventilation around the ESC. Check motor load and gearing.

For more detailed troubleshooting, refer to the comprehensive troubleshooting guide in your user manual or contact HobbyWing support.

8. Especificacións

9. Garantía e soporte

For warranty information, technical support, or service inquiries, please refer to the documentation included with your product or visit the official HobbyWing websitio. Garda o comprobante de compra para calquera reclamación de garantía.