URMET Artico Bracket for 2GO! System

1. Introdución

This manual provides detailed instructions for the installation, usage, and maintenance of the URMET Artico Bracket, model 1705/82. This bracket is specifically designed to integrate with the URMET 2GO! system, providing a secure and stable mounting solution for compatible devices.

Please read this manual carefully before proceeding with installation to ensure proper setup and safe operation.

2. Información de seguridade

• Desconecte sempre a alimentación da zona de instalación antes de comezar calquera traballo.
• Asegúrate de que todas as conexións estean seguras e debidamente illadas para evitar riscos eléctricos.
• Use ferramentas adecuadas para a instalación.
• Se ten algunha dúbida sobre calquera parte do proceso de instalación, consulte cun electricista ou técnico cualificado.
• Manter o produto fóra do alcance dos nenos.

3. Contido do paquete

Verifica que todos os compoñentes estean presentes no paquete:

• 1 x URMET Artico Bracket (Model 1705/82)
• Mounting screws and wall plugs (quantity may vary)
• Este manual de instrucións

4. Configuración e instalación

The URMET Artico Bracket 1705/82 is designed for easy installation. Follow these steps carefully:

1. Escolla lugar de montaxe: Select a suitable, stable surface for mounting the bracket. Ensure there is enough space for the device that will be attached to the bracket and that the location allows for proper wiring if applicable.
2. Marcar os puntos de perforación: Hold the bracket against the chosen surface and use a pencil to mark the positions for the mounting screws. Ensure the bracket is level before marking.
3. Perforación: Using an appropriate drill bit for your wall type, drill holes at the marked positions. The depth and diameter of the holes should match the provided wall plugs.
4. Inserir tacos de parede: Insert the wall plugs into the drilled holes until they are flush with the surface.
5. Asegure o soporte: Align the bracket with the wall plugs and insert the mounting screws. Tighten the screws firmly until the bracket is securely fastened to the wall. Do not overtighten.
6. Attach 2GO! System Device: Once the bracket is securely mounted, attach the compatible URMET 2GO! system device to the bracket according to the device's specific instructions. Ensure it clicks or locks into place if designed to do so.

Figure 1: Illustration of the URMET Artico Bracket 1705/82 during installation, showing screw points.

5. Uso

The URMET Artico Bracket 1705/82 serves as a dedicated mounting accessory for specific components of the URMET 2GO! system. Once installed, it provides a stable and secure base for the intended device. Ensure that the device is correctly seated and secured onto the bracket as per its own manual.

The bracket itself does not require any operational steps; its function is purely structural support.

6. Mantemento

The URMET Artico Bracket 1705/82 requires minimal maintenance.

• Limpeza: Periodically wipe the bracket with a soft, dry cloth to remove dust. Do not use abrasive cleaners or solvents.
• Inspección: Occasionally check the mounting screws to ensure they remain tight. If the bracket appears loose, gently tighten the screws.
• Danos: If the bracket shows signs of damage or wear, it should be replaced immediately to ensure the safety and stability of the mounted device.

7 Solución de problemas

Most issues related to the Artico Bracket are installation-related.

• O soporte está solto:
  • Asegúrese de que os parafusos de montaxe estean completamente axustados.
  • Verify that the wall plugs are correctly seated and appropriate for the wall material.
  • If the wall material is weak, consider using stronger wall anchors or relocating the bracket.
• Device Does Not Fit on Bracket:
  • Confirm that the device you are trying to mount is compatible with the URMET Artico Bracket 1705/82 and the 2GO! system.
  • Check for any obstructions or incorrect alignment during attachment.

8. Especificacións

9. Información da garantía

URMET products are covered by a standard manufacturer's warranty. For specific details regarding the warranty period and terms for the Artico Bracket 1705/82, please refer to the warranty card included with your purchase or visit the official URMET websitio. Garda o comprobante de compra para reclamacións de garantía.

10. Atención ao cliente

If you have any questions, require technical assistance, or need to report a problem with your URMET Artico Bracket 1705/82, please contact URMET customer support. Contact information can typically be found on the official URMET websitio web ou na embalaxe do produto.

Official URMET Websitio: www.urmet.com

11. Vídeos de produtos

No official product videos specifically detailing the installation or features of the URMET Artico Bracket 1705/82 were found from the seller. Please refer to the written instructions and diagrams provided in this manual for guidance.